INCANDESCENT PANEL MOUNT INDICATORS 004 & 113 SERIES FOR 15/32" MOUNTING HOLE • LIGHT SHIELD 15/32 - 32 NS THD 4-40 THD. GASKET BASE PART NO. VOLTAGE FIG 004-1830-29-203 004-1930-29-203 1.35–28 1.35–28 1 2 COLOR FIG 004-2900-200 NO LENS 3 Uses: T-1 3/4 MIDGET FLANGE BASE INCANDESCENT LAMP 15/32 - 32 NS THD Fig. 1 Fig. 2 23.81 [.94] MAX CAP PART NO. GASKET WITH LAMP CAP PART NO. COLOR FIG 113-2931-203 113-2937-203 RED CLEAR 4 4 20.24 [.80] MAX WITH LAMP Fig. 3 Fig. 4 3/8 - 24 UNF THD GASKET 8.33 11.11 [.33] [.48] 6.35 [.25] 10.32 [.41] 15.08 [.59] Material & Finish: Base - Black Nickel Plated Brass, Cap - Black Nickel Plated Brass with High Impact Plastic Lens PLASTIC FILTER 101, 111, 140 SERIES FOR 15/32" MOUNTING HOLE • WATERTIGHT GASKET BASE PART NO. VOLTAGE 101-3830-09-203 101-8430-09-203 15/32 - 32NS THD 1.35–28 1.35–28 GASKET Fig. 5 5 6 + CENTER CONTACT Fig. 6 1.19 [.05] x 2.38 [.09] (2 SLOTS) 1.19 [.05] x 2.38 [.09] (2 SLOTS) 17.46 [.69] MAX 21.43 [.84] MAX CAP PART NO. * 101-0937-003 101-0971-003 101-0972-003 101-0973-003 101-0975-003 111-0111-203 111-0112-203 COLOR CLEAR RED GREEN AMBER WHITE RED GREEN FIG 7 7 7 7 7 8 8 15/32 - 32NS THD + CENTER CONTACT FIG CAP PART NO. * 111-0113-203 111-0135-203 111-0137-203 140-1437-003 140-1471-003 140-1472-003 140-1473-003 140-1475-003 COLOR AMBER WHITE CLEAR CLEAR RED GREEN AMBER WHITE FIG 8 8 8 9 9 9 9 9 Fig. 7 GASKET 5/16 32NS THD 12.7 [.50] Uses: T-1 3/4 MIDGET FLANGE BASE INCANDESCENT LAMP OR BASED Fig. 8 LED LAMP** GASKET 13.10 [.52] 6.75 [.27] 7.14 [.28] 17.86 [.70] MAX 18.26 [.72] MAX GASKET 12.7 [.50] Material & Finish: Base - Black Nickel Plated Brass, Cap - High Impact Plastic; Polycarbonate with Black Nickel Bezel (Fig. 8) ** Dialight recommends: Transparent lens caps for Based LEDs; Clear lens caps for Green Based LEDs *PART NUMBER ORDERING CODE 101 – 09xx – 003 140 – 14xx – 003 Series Fig. 9 6.75 [.27] 17.86 [.70] MAX *PART NUMBER ORDERING CODE 111 – 01xx – 203 Series Lens Finish: 1 = Back Frosted (Not available in white) 3 = Transparent** Lens Finish: 3 = Transparent** 7 = Translucent (Not available in clear) 812 SERIES FOR 15/32" MOUNTING HOLE • PRESS-TO-TEST BASE PART NO. VOLTAGE FIG 812-1030-09-506 1.35–28 10 Fig. 10 3/32 PRESS TO TEST FLANGE NUT 15/32 - 32NS THD 2 Uses: T-1 3/4 MIDGET FLANGE BASE INCANDESCENT LAMP OR BASED LED LAMP** 1 CAP PART NO. * 812-0937 812-0971 812-0972 812-0973 812-0975 COLOR CLEAR RED GREEN AMBER WHITE FIG 11 11 11 11 11 3 Fig. 11 22.23 [.88] MAX 7.14 [.28] 1.19 [.05] x 1.98 [.08] SLOTS 12.70 [.50] 18.26 [.72] MAX 5/16 - 32 NEF THD *PART NUMBER ORDERING CODE 812 – 09xx Material & Finish: Base - Black Anodized Aluminum, Cap - High Impact Plastic ** Dialight recommends: Transparent lens caps for Based LEDs; Clear lens caps for Green Based LEDs Series Neon and incandescent lamp information on Pages 35 and 36. Based LED lamp information on Pages on 37 through 40. Dimensions in mm [inches] 19 Dialight Corporation • 1501 State Route 34 • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 • www.dialight.com Lens Finish: 3 = Transparent** 7 = Translucent (Not available in clear) Dialight