Specification Part No: MA07080 Product Description Features Description: 12.0MHz GSX-333/111MF SM Crystal Product family: GSX-333 Category: SM Quartz Crystal Order code: MA07080 Additional Information For further information regarding packaging, construction, material composition, soldering profile and environment, please refer to GSX-333 Product Information sheet Metal lid can be grounded to minimise EMI Seam sealed for excellent long-term stability For dimensions, refer to package drawing: D0262-A Ultra-miniature for maximum space saving Electrical Specifications Parameter Value Nominal frequency: Notes 12.0MHz Calibration tolerance: ±10ppm max At 25°C ±3°C Temperature stability: ±10ppm max Referred to frequency at 25°C Operating temperature range: -10 to +60°C Storage temperature range: -40 to +85°C Circuit condition: 8pF Static capacitance (C0): 3.0pF max Pulling sensitivity: 10.5ppm / pF typ Oscillation mode: Fundamental Equivalent series resistance: 100Ω max Test drive level: Tel: +44 1460 256 100 Issue 01 - 23 Mar 2005 Load @ 8pF 10μW Fax: +44 1460 256 101 E-mail: [email protected] Web: www.golledge.com Product Information GSX-333 Construction Ceramic body with gold-plated pads Metal lid, seam sealed Composition RoHS This product is lead-free, and is fully compliant with the RoHS directive 2002/95/EC Pb LeadFree 2002/95/EC Packaging & Handling Production quantities supplied on T&R, 3k pcs per reel. Small quantities may be supplied on tape (no reel), or in bulk. Soldering Profile 10s max °C 260 Marking Marking type: Laser DC = Date code in YW, as shown below Example: “zd” = 2012 week 30 FREQUENCY T zDC Year Week codes: 2009 2010 2011 2012 2013 2014 2015 2016 Code Z z Z 200 A ~ Z: weeks 1 to 26 a ~ z: weeks 27 to 52 z 100 Tape & Reel Specification 4.0 2.0 1.50Ø 5°C/s max 5°C/s max 1.75 Preheat 140~160°C Heat > 200°C 60~90s max 50~60s max 0 0.3 ±0.05 Maximum solder resistance: 260°C x 10 secs x 2. 5° 5.5 ±0.05 MARK 3.8 1.1 2.8 12.0 ±0.3 FEED 4.0 +2.0 12.4 -0.0 3.0 120° 1.50 20.2Ø 13Ø 330Ø 100Ø Not to scale. Dimensional tolerances ±0.1mm unless otherwise stated. Tel: +44 1460 256 100 24 May 2011 Slow cooldown Fax: +44 1460 256 101 E-mail: [email protected] Web: www.golledge.com Time Package Drawing D0262-A Product Family GSX-333 Construction Ceramic body with gold-plated pads Metal lid, seam sealed Dimensions (mm) 3.30 (max) 2.60 (max) 0.70 (max) SOLDER PAD LAYOUT 0.70 1 0.30 2 4 3 1.20 1 2 1.20 1.00 3 4 1.20 1.40 1.40 TOP VIEW PAD CONNECTION 1 Crystal 2 Ground & lid 3 Crystal 4 Ground & lid NOTE: Chamfer normally on pad 4, but ŵĂLJĂůƚĞƌŶĂƟǀĞůLJďĞƐƵƉƉůŝĞĚŽŶƉĂĚϭ͘ Tel: +44 1460 256 100 Issue 04 - 30 Apr 2012 Fax: +44 1460 256 101 E-mail: [email protected] Web: www.golledge.com