CMOS Oscillator -55+125°C Low Jitter MCSOF Specifications MCSOF: 10.0kHz ~ 20.0MHz MCSOFH: 20.0 ~ 225MHz Product Parameters MCSOF Frequency range: 10.0kHz ~ 225MHz Supply voltage (VDD): +3.3V (±5%) +2.5V (±5%) V W ±100ppm ±50ppm tighter stabilities on request T specify Operating temperature range: 0 to +70°C -40 to +85°C -55 to +125°C A B C Storage temperature range: -55 to +125°C Frequency stability*: Supply current: 3pF min, 47pF max ‘0’ level = +0.4V max ‘1’ level = VDD-0.5V min Load: Logic levels: 1ms typ, 5ms max Waveform symmetry: 40:60 max @ 50%VDD Start up time: Low jitter Jitter RMS (1): < 2ps (≤20.0MHz) < 10ps (>20.0MHz) Rise / fall times: 7ns max ≤20MHz 3ns max >20MHz Enable / disable function: None (pad 1 NC) Tristate* (control via pad 1) * not available under 500kHz Military temperature range -55+125°C option Excellent shock & vibration resistance Enable / disable tristate option (>500kHz) Wide frequency range available Enable / Disable Function Input (pad 1) Output (pad 3) Open ‘1’ level ‘0’ level Enabled Enabled High Impedance Supply current See table CMOS Driving ability: Features Shock resistance: 5,000G, 0.3ms, ½ sine Vibration resistance: 20G rms 10.0 ~ 2,000Hz Soldering condition: 260°C, 10 sec max 2.5V 3.3V ≤ 10MHz 10 ~ 20MHz 20 ~ 160MHz 2mA 3mA 25mA 4mA 5mA 30mA Maximum values, no load. Standard. Optional - Please specify required code(s) when ordering * Frequency stability is inclusive of calibration @ 25°C, operating temperature range, supply voltage change, load change and ageing over 10 years. Product name + option codes + frequency eg: MCSOFV/CE 10.0MHz 3.3V ±100ppm -55 to +125°C Enable / disable For frequencies 20.0MHz add an 'H' to the product name eg: MCSOFHW/TB 32.0MHz 2.5V ±50ppm -40 to +85°C no E/D Option code X (eg MCSOF/X) denotes a custom specification. Packed in trays (50pcs/tray) or T&R 250 ~ 500pcs/reel 28 Nov 2013 E Ordering Information Freq / Supply Tel: +44 1460 256 100 Option Codes Fax: +44 1460 256 101 E-mail: [email protected] Web: www.golledge.com