RENESAS HD74ALVC2G14USE

HD74ALVC2G14
Triple Schmitt-trigger Inverter Buffers
REJ03D0165–0300Z
(Previous ADE-205-634B (Z))
Rev.3.00
Dec.17.2003
Description
The HD74ALVC2G14 has triple inverters with schmitt-trigger input in an 8 pin package. Low voltage and
high-speed operation is suitable for the battery powered products (e.g., notebook computers), and the low
power consumption extends the battery life.
Features
• The basic gate function is lined up as Renesas uni logic series.
• Supplied on emboss taping for high-speed automatic mounting.
• Supply voltage range : 1.2 to 3.6 V
Operating temperature range: −40 to +85°C
• All inputs VIH (Max.) = 3.6 V (@VCC = 0 V to 3.6 V)
All outputs VO (Max.) = 3.6 V (@VCC = 0 V)
• Output current
±2 mA (@VCC = 1.2 V)
±4 mA (@VCC = 1.4 V to 1.6 V)
±6 mA (@VCC = 1.65 V to 1.95 V)
±18 mA (@VCC = 2.3 V to 2.7 V)
±24 mA (@VCC = 3.0 V to 3.6 V)
• All the logical input has hysteresis voltage for the slow transition.
• Ordering Information
Part Name
Package Type
Package Code
Package
Abbreviation
Taping Abbreviation
(Quantity)
HD74ALVC2G14USE
SSOP-8 pin
TTP-8DBV
US
E (3,000 pcs/reel)
Rev.3.00, Dec.18.2003, page 1 of 9
HD74ALVC2G14
Outline and Article Indication
• HD74ALVC2G14
Index band
Lot No.
Y M W
A 1 4
SSOP-8
Marking
Function Table
Input A
Output Y
H
L
L
H
H:
L:
High level
Low level
Rev.3.00, Dec.18.2003, page 2 of 9
Y : Year code
(the last digit of year)
M : Month code
W : Week code
HD74ALVC2G14
Pin Arrangement
1A
1
8
VCC
3Y
2
7
1Y
2A
3
6
3A
GND
4
5
2Y
(Top view)
Absolute Maximum Ratings
Item
Symbol
Ratings
Unit
Supply voltage range
VCC
−0.5 to 4.6
V
Input voltage range *1
VI
−0.5 to 4.6
V
VO
−0.5 to VCC+0.5
V
Output voltage range
*1, 2
−0.5 to 4.6
Conditions
Output : H or L
VCC : OFF
Input clamp current
IIK
−50
mA
VI < 0
Output clamp current
IOK
±50
mA
VO < 0 or VO > VCC
Continuous output current
IO
±50
mA
VO = 0 to VCC
Continuous current through
VCC or GND
ICC or IGND
±100
mA
Maximum power dissipation
*3
at Ta = 25°C (in still air)
PT
200
mW
Storage temperature
Tstg
−65 to 150
°C
Notes:
The absolute maximum ratings are values, which must not individually be exceeded, and
furthermore, no two of which may be realized at the same time.
1. The input and output voltage ratings may be exceeded if the input and output clamp-current
ratings are observed.
2. This value is limited to 4.6 V maximum.
3. The maximum package power dissipation was calculated using a junction temperature of 150°C.
Rev.3.00, Dec.18.2003, page 3 of 9
HD74ALVC2G14
Recommended Operating Conditions
Item
Symbol
Min
Max
Unit
Supply voltage range
VCC
1.2
3.6
V
Input voltage range
VI
0
3.6
V
Output voltage range
VO
0
VCC
V
Output current
IOH

−2
mA

−4
VCC = 1.4 V

−6
VCC = 1.65 V

−18
VCC = 2.3 V

−24
VCC = 3.0 V

2
VCC = 1.2 V

4
VCC = 1.4 V

6
VCC = 1.65 V

18
VCC = 2.3 V

24
−40
85
IOL
Operating free-air temperature
Ta
Note: Unused or floating inputs must be held high or low.
Rev.3.00, Dec.18.2003, page 4 of 9
Conditions
VCC = 1.2 V
VCC = 3.0 V
°C
HD74ALVC2G14
Electrical Characteristics
(Ta = −40 to 85°C)
Item
Threshold voltage
Symbol
VT
VT
+
−
∆VT
Output voltage
VOH
VOL
VCC (V) *
Min
Typ
Max
Unit
1.2


VCC×0.8
V
1.4 to 1.6


VCC×0.75
1.65 to 1.95


VCC×0.7
2.3 to 2.7


1.7
3.0 to 3.6


2.0
1.2
VCC×0.2


1.4 to 1.6
VCC×0.25 

1.65 to 1.95
VCC×0.3


2.3 to 2.7
0.7


3.0 to 3.6
0.8


1.2
0.1

0.4
1.4 to 1.6
0.1

0.6
1.65 to 1.95
0.15

0.8
2.3 to 2.7
0.25

1.0
3.0 to 3.6
0.25

1.2
Min to Max
VCC−0.2


1.2
0.9


IOH = −2 mA
1.4
1.1


IOH = −4 mA
1.65
1.2


IOH = −6 mA
2.3
1.7


IOH = −18 mA
3.0
2.2


IOH = −24 mA
Min to Max


0.2
IOL = 100 µA
1.2


0.3
IOL = 2 mA
1.4


0.3
IOL = 4 mA
1.65


0.3
IOL = 6 mA
2.3


0.55
IOL = 18 mA
V
Test conditions
IOH = −100 µA
3.0


0.55
Input current
IIN
3.6


±5
µA
VIN = 3.6 V or GND
Quiescent supply
current
ICC
3.6


10
µA
VIN = VCC or GND,
IO = 0
Output leakage
current
IOFF
0


5
µA
VIN or VO =
0 to 3.6 V
Input capacitance
CIN
3.3

5.0

pF
VIN = VCC or GND
IOL = 24 mA
Note: For conditions shown as Min or Max, use the appropriate values under recommended operating
conditions.
Rev.3.00, Dec.18.2003, page 5 of 9
HD74ALVC2G14
Switching Characteristics
(Ta = −40 to 85°C)
VCC = 1.2 V
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL

7.0

ns
CL = 15 pF
A
Y
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL
2.0

8.0
ns
CL = 15 pF
A
Y
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL
1.5

6.0
ns
CL = 30 pF
A
Y
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL
1.0

4.5
ns
CL = 30 pF
A
Y
Item
Symbol
Min
Typ
Max
Unit
Test
conditions
FROM
(Input)
TO
(Output)
Propagation
delay time
tPLH
tPHL
1.0

3.5
ns
CL = 30 pF
A
Y
VCC = 1.5±0.1 V
VCC = 1.8±0.15 V
VCC = 2.5±0.2 V
VCC = 3.3±0.3 V
Rev.3.00, Dec.18.2003, page 6 of 9
HD74ALVC2G14
Operating Characteristics
(Ta = 25°C)
Item
Symbol
VCC (V)
Min
Typ
Max
Unit
Test conditions
Power dissipation
CPD
1.5

10.5

pF
f = 10 MHz
1.8

10.5

2.5

12.0

3.3

13.0

capacitance
Test Circuit
VCC
Pulse
Generator
Input
Output
Z out = 50 Ω
CL
Symbol
RL
V CC = 1.2 V,
V = 2.5±0.2 V,
V = 1.8±0.15 V CC
1.5±0.1 V CC
3.3±0.3 V
RL
2.0 kΩ
1.0 kΩ
500 Ω
CL
15 pF
30 pF
30 pF
Note: CL includes probe and jig capacitance.
Rev.3.00, Dec.18.2003, page 7 of 9
HD74ALVC2G14
Waveforms
tr
tf
Input
VIH
90%
90%
V ref
V ref
10%
10%
t PHL
GND
t PLH
VOH
Output
V ref
V ref
VOL
Symbol
V CC = 1.2 V,
1.5±0.1 V, V CC = 2.5±0.2 V
1.8±0.15 V
V CC = 3.3±0.3 V
tr / t f
2.0 ns
2.5 ns
2.5 ns
V IH
VCC
VCC
2.7 V
V ref
50%
50%
1.5 V
Note: Input waveform : PRR = 10 MHz, duty cycle 50%
Rev.3.00, Dec.18.2003, page 8 of 9
HD74ALVC2G14
Package Dimensions
2.0 ± 0.2
1.5 ± 0.2
+ 0.1
(0.17)
8 − 0.2 − 0.05
Package Code
JEDEC
JEITA
Mass (reference value)
Rev.3.00, Dec.18.2003, page 9 of 9
+ 0.1
0.13 − 0.05
0 − 0.1
0.7 ± 0.1 (0.4)
2.3 ± 0.1
(0.5) (0.5) (0.5)
3.1 ± 0.3
(0.4)
Unit: mm
TTP–8DBV


0.010 g
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
http://www.renesas.com
RENESAS SALES OFFICES
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501
Renesas Technology Europe Limited.
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom
Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900
Renesas Technology Europe GmbH
Dornacher Str. 3, D-85622 Feldkirchen, Germany
Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11
Renesas Technology Hong Kong Ltd.
7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2375-6836
Renesas Technology Taiwan Co., Ltd.
FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology (Shanghai) Co., Ltd.
26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China
Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952
Renesas Technology Singapore Pte. Ltd.
1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
© 2003. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon 1.0