HD29029 Dual CCD Drivers REJ03D0303–0200Z (Previous ADE-205-580 (Z)) Rev.2.00 Jul.16.2004 Description The HD29029 is optimum for CCD drive and has two drivers in a package. The input circuit is operated at TTL level. The outputs are capable of source or sink currents of 0.5 A. Features • High-speed operation 7 ns typ in transition times (tTLH, tTHL) at CL = 200 pF • No external components needed because direct drive is available at TTL level inputs • Output swing voltage: 12 V • Sink/Sourse currents: 0.5 A (for each) • Output cross voltage: 50% typ • Ordering Information Part Name HD29029FPEL Package Type SOP-8 pin (JEITA) Package Abbreviation Package Code FP-8DGV FP Pin Arrangement NC 1 8 NC 1A 2 7 1Y 6 VCC GND 3 2A 4 5 2Y (Top view) Rev.2.00, Jul.16.2004, page 1 of 6 Taping Abbreviation (Quantity) EL (2,500 pcs/reel) HD29029 Function Table Input A Output Y H L L H H: High level L: Low level Absolute Maximum Ratings Item Symbol Ratings Unit Supply Voltage VCC*1 15 V Input Voltage Output Current VIN IO(peak) 7 ±0.5 V A Operating Temperature Storage Temperature Ta Tstg –20 to +75 –65 to +150 °C °C Junction Temperature Power Dissipation per Package Tj PT*2 150 0.735 °C W Notes: 1. The voltage value is defined with respect to grund terminal unless otherwise noted. 2. The total power dissipation is at Ta = 25°C. When driving large capacity with high frequency radiation is needed. There fore, delating with 5.9 mW/°C must be done as shown below. 3. The absolute maximum ratings are values which must not individually be eceeded, and furthermore, no two of which may be realized at same time. 1.0 0.735 PT (W) 0.5 0.44 0 –20 0 25 50 75 VCC VCC VCC VCC = 13.0 V = 12.0 V = 9.0 V = 8.0 V T a (°C) 1000 Load Capacitance CL (PF) Ta = 75 °C 750 500 250 0 1.0 3.0 5.0 10.0 Operating Frequency f (MHz) Rev.2.00, Jul.16.2004, page 2 of 6 30.0 HD29029 Recommended Operating Conditions Item Symbol Supply Voltage Operating Temperature Min VCC Ta Typ 8.0 –20 max 9.0 25 13.0 75 Unit V °C Electrical Characteristics (VCC = 8 to 13 V, Ta = –20 to 75°C) Item Symbol Min Typ Max Unit Conditions Input Voltage VIH VIL 2.0 — — — — 0.6 V V Output Voltage VOH VOL VCC–2 — — — — 0.5 V V VIL = 0.6 V, IOH = –1 mA VIH = 2.0 V, IOH = 1 mA Input Current IIH VIL — — — — 20 –100 µA µA VI = 2.7 V VI = 0.4 V Supply Current ICCH ICCL — — — — 10 25 mA mA Input Current Input Clamp Voltage ILI VIK — — — — 100 –1.5 µA V VI = 7 V IIN = –18 mA Switching Characteritics (CL = 200 pF, Ta = 25°C) Item Propagation Delay Time Transition Time Symbol tPHL — Typ 4.0 ns VCC = 9 V tPLH — — 4.0 6.0 13.0 15.0 ns ns VCC = 12 V VCC = 9 V tTHL — — 6.0 8.0 13.0 14.0 ns ns VCC = 12 V VCC = 9 V tTLH — — 7.0 8.0 12.0 14.0 ns ns VCC = 12 V VCC = 9 V — 7.0 12.0 ns VCC = 12 V Rev.2.00, Jul.16.2004, page 3 of 6 Min Max 15.0 Unit Conditions HD29029 Switching Time Test Method Test circuit VCC Input Pulse Generator Zout = 50 Ω Output CL Note: 1. CL includes probe and jig capacitance. Waveforms 5 ns 5 ns 90 % 1.5 V Input 10 % 10 % t PHL 10 % t THL Note: 1. Input Waveforms: f = 1 MHz, duty cycle 50% Rev.2.00, Jul.16.2004, page 4 of 6 0V t PLH 90 % Output 3V 90 % 1.5 V VOH 90 % 10 % VOL t TLH HD29029 Output Characteristics (CL = 200 pF, Ta = 25°C) Item Symbol Output Cross Voltage VX Min 20 20 Typ Max 50 50 Unit 80 80 % % Conditions VCC = 9 V VCC = 12 V Test circuit VCC 1A 2A 1Y Pulse Generator Zout = 50 Ω 2Y CL Note: CL 1. CL includes probe and jig capacitance. Waveforms 5 ns 2A or 1A 1A or 2A 1Y or 2Y 2Y or 1Y Note: 90 % 10 % 80 % 20 % 90 % 1.5 V 10 % 90 % 1.5 V 10 % 80 % VX 20 % 80 % 1. Input Waveforms: f = 1 MHz, duty cycle 50% Rev.2.00, Jul.16.2004, page 5 of 6 5 ns 20 % 90 % 10 % 80 % VX 20 % 3V 0V VOH VOL HD29029 Package Dimensions Unit: mm 4.85 4.4 5.25 Max 5 8 1 0.75 Max *0.20 ± 0.05 2.03 Max 4 0.25 6.50 +– 0.15 1.05 1.27 *0.40 ± 0.05 0.10 ± 0.10 0˚ – 8˚ 0.25 0.60 +– 0.18 0.15 0.12 M *This dimension include Pd plating Rev.2.00, Jul.16.2004, page 6 of 6 Package Code JEDEC JEITA Mass (reference value) FP-8DGV — Conforms 0.10 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 © 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0