6 PIN DIP SCHMITT TRIGGER PHOTOCOUPLER H11LX Series Schematic Features: • High data rate, 1MHz typical (NRZ) • Free from latch up and oscillation throughout voltage and temperature ranges. • Microprocessor compatible drive • Logic compatible output sinks 16mA at 0.4V maximum • Guaranteed on/off threshold hysteresis • Wide supply voltage capability, compatible with all popular logic systems • High isolation voltage between input and output (Viso=5000 V rms ) • Compact dual-in-line package • Pb free and RoHS compliant • UL and cUL approved(No. E214129) • VDE approved (No. 132249) • SEMKO approved • NEMKO approved • DEMKO approved • FIMKO approved Pin Configuration 1. Anode 2. Cathode 3. No Connection 4. VO 5. GND 6. VCC Truth Table Description The H11LX series of devices each consist of a GaAs infrared emitting diode optically coupled a high speed integrated circuit detector. The output detector incorporates a Schmitt trigger, which provides hysteresis for noise immunity and pulse shaping. The devices are in a 6-pin DIP package and available in wide-lead spacing and SMD option. Applications Logic to logic isolator Programmable current level sensor Line receiver － eliminate noise and transient problems AC to TTL conversion － square wave shaping Digital programming of power supplies Interfaces computers with peripherals 1 Copyright Revision :4 © LifecyclePhase: Release Date:2014-06-13 13:37:21.0 2010, Everlight All Rights Reserved. Release Date : June 5, 2014. Issue No: DPC-0000022 Rev 4 www.everlight.com Expired Period: Forever DATASHEET 6 PIN DIP Schmitt Trigger PHOTOCOUPLER H11LX Series Absolute Maximum Ratings (Ta=25°C) Parameter Symbol Rating Unit Forward current IF 60 mA Reverse voltage VR 6 V Power dissipation PD 120 mW V45 Allowed Range Vo 0 to 16 V V65 Allowed Range VCC 3 to 16 V Output Current Io 50 mA Power dissipation PD 150 mW Total power dissipation Ptot 250 mW Isolation voltage Viso 5000 V rms Operating temperature Topr -55~+100 °C Storage temperature Tstg -55~+150 °C Tsol 260 °C Input Output Soldering temperature *2 Notes: *1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2 & 3 are shorted together, and pins 4, 5 & 6 are shorted together. *2 For 10 seconds 2 Copyright Revision :4 © LifecyclePhase: Release Date:2014-06-13 13:37:21.0 2010, Everlight All Rights Reserved. Release Date : June 5, 2014. Issue No: DPC-0000022 Rev 4 www.everlight.com Expired Period: Forever DATASHEET 6 PIN DIP Schmitt Trigger PHOTOCOUPLER H11LX Series Electro-Optical Characteristics (Ta=25°C unless specified otherwise) Input Parameter Symbol Min. Typ.* Max. Unit Condition Forward Voltage VF - 1.15 1.5 V IF = 10mA Reverse Current IR - - 10 µA VR = 5V Input capacitance CJ - - 100 pF V=0, f=1MHz Symbol Min. Typ.* Max. Unit Condition VCC 3 - 15 V ICC(off) - 1.6 5 mA IF=0mA, Vcc=5V IOH - - 100 µA IF=0mA, Vcc=Vo=15V - - Ω VI-O=500VDC Output Parameter Operation Voltage Range Supply Current Output Current, High Isolation Resistance RISO 11 10 Transfer Characteristics Symbol Min Typ. Max. Unit Condition ICC(on) - 1.6 5 mA IF=10mA, Vcc=5V VOL - - 0.4 V Vcc=5V, IF=IFon(max.), RL=270Ω - - 1.6 - - 10 mA Vcc=5V, RL=270Ω - - 5 IFoff - 1 - mA Vcc=5V, RL=270Ω IFoff /IFon 0.5 - 0.9 Turn on Time ton - - 4 μS Fall Time tr - 0.1 - μS Turn off Time toff - - 4 μS Rise Time tr - 0.1 - μS - 1 - MHz Parameter Supply Current Output Voltage .low H11L1 Turn on Threshold 1 Current H11L2 H11L3 Turn off Threshold Current Hysteresis Ratio Data Rate IFon Vcc=5V, RL=270Ω Vcc=5V, IF=IFon, RL=270Ω * Typical values at Ta = 25°C 1 . Max. IF(ON) is the maximum current required to trigger the output. For examples, a 1.6mA maximum trigger current would require the LED to be driven at a current greater than 1.6mA to guarantee the device will turn on. A 10% guard band is recommended to account for degradation of the LED over its lifetime. The maximum allowable LED drive current is 60mA. 3 Copyright Revision :4 © LifecyclePhase: Release Date:2014-06-13 13:37:21.0 2010, Everlight All Rights Reserved. Release Date : June 5, 2014. Issue No: DPC-0000022 Rev 4 www.everlight.com Expired Period: Forever DATASHEET 6 PIN DIP Schmitt Trigger PHOTOCOUPLER H11LX Series Typical Electro-Optical Characteristics Curves 4 Copyright Revision :4 © LifecyclePhase: Release Date:2014-06-13 13:37:21.0 2010, Everlight All Rights Reserved. Release Date : June 5, 2014. Issue No: DPC-0000022 Rev 4 www.everlight.com Expired Period: Forever DATASHEET 6 PIN DIP Schmitt Trigger PHOTOCOUPLER H11LX Series Figure 7. Switching Time Test Circuit & Waveforms Order Information Part Number H11LXY(Z)-V Note X = Part No. for 1, 2 or 3 Y = Lead form option (S, S1, M or none) Z = Tape and reel option (TA, TB or none). V = VDE (optional) Option Description Packing quantity None Standard DIP-6 65 units per tube M Wide lead bend (0.4 inch spacing) 65 units per tube S + TA Surface mount lead form + TA tape & reel option 1000 units per reel S + TB Surface mount lead form + TB tape & reel option 1000 units per reel S1 + TA Surface mount lead form (low profile) + TA tape & reel option 1000 units per reel S1 + TB Surface mount lead form (low profile) + TB tape & reel option 1000 units per reel 5 Copyright Revision :4 © LifecyclePhase: Release Date:2014-06-13 13:37:21.0 2010, Everlight All Rights Reserved. Release Date : June 5, 2014. Issue No: DPC-0000022 Rev 4 www.everlight.com Expired Period: Forever DATASHEET 6 PIN DIP Schmitt Trigger PHOTOCOUPLER H11LX Series Package Dimension (Dimensions in mm) Standard DIP Type Option M Type 6 Copyright Revision :4 © LifecyclePhase: Release Date:2014-06-13 13:37:21.0 2010, Everlight All Rights Reserved. Release Date : June 5, 2014. Issue No: DPC-0000022 Rev 4 www.everlight.com Expired Period: Forever DATASHEET 6 PIN DIP Schmitt Trigger PHOTOCOUPLER H11LX Series Option S Type Option S1 Type 7 Copyright Revision :4 © LifecyclePhase: Release Date:2014-06-13 13:37:21.0 2010, Everlight All Rights Reserved. Release Date : June 5, 2014. Issue No: DPC-0000022 Rev 4 www.everlight.com Expired Period: Forever DATASHEET 6 PIN DIP Schmitt Trigger PHOTOCOUPLER H11LX Series Recommended pad layout for surface mount leadform Device Marking EL H11L3 YWWV Notes EL H11L3 Y WW V denotes Everlight denotes Device Number denotes 1 digit Year code denotes 2 digit Week code denotes VDE (optional) 8 Copyright Revision :4 © LifecyclePhase: Release Date:2014-06-13 13:37:21.0 2010, Everlight All Rights Reserved. Release Date : June 5, 2014. Issue No: DPC-0000022 Rev 4 www.everlight.com Expired Period: Forever DATASHEET 6 PIN DIP Schmitt Trigger PHOTOCOUPLER H11LX Series Tape & Reel Packing Specifications Option TA Option TB Direction of feed from reel Direction of feed from reel Tape dimensions Dimension No. A B Do D1 E F Dimension(mm) 10.4±0.1 7.5±0.1 1.5±0.1 1.5+0.1/-0 1.75±0.1 7.5±0.1 Dimension No. Po P1 P2 t W K Dimension(mm) 4.0±0.15 12±0.1 2.0±0.1 0.35±0.03 16.0±0.2 4.5±0.1 9 Copyright Revision :4 © LifecyclePhase: Release Date:2014-06-13 13:37:21.0 2010, Everlight All Rights Reserved. Release Date : June 5, 2014. Issue No: DPC-0000022 Rev 4 www.everlight.com Expired Period: Forever DATASHEET 6 PIN DIP Schmitt Trigger PHOTOCOUPLER H11LX Series Precautions for Use 1. Soldering Condition 1.1 (A) Maximum Body Case Temperature Profile for evaluation of Reflow Profile Note: Reference: IPC/JEDEC J-STD-020D Preheat Temperature min (Tsmin) 150 °C Temperature max (Tsmax) 200°C Time (Tsmin to Tsmax) (ts) Average ramp-up rate (Tsmax to Tp) 60-120 seconds 3 °C/second max Other Liquidus Temperature (TL) 217 °C Time above Liquidus Temperature (t L) 60-100 sec Peak Temperature (TP) 260°C Time within 5 °C of Actual Peak Temperature: TP - 5°C 30 s Ramp- Down Rate from Peak Temperature 6°C /second max. Time 25°C to peak temperature Reflow times 8 minutes max. 3 times . 10 Copyright Revision :4 © LifecyclePhase: Release Date:2014-06-13 13:37:21.0 2010, Everlight All Rights Reserved. Release Date : June 5, 2014. Issue No: DPC-0000022 Rev 4 www.everlight.com Expired Period: Forever DATASHEET 6 PIN DIP Schmitt Trigger PHOTOCOUPLER H11LX Series DISCLAIMER 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. 11 Copyright Revision :4 © LifecyclePhase: Release Date:2014-06-13 13:37:21.0 2010, Everlight All Rights Reserved. Release Date : June 5, 2014. Issue No: DPC-0000022 Rev 4 www.everlight.com Expired Period: Forever