LD42__43 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com POW-R-BLOKTM Dual SCR/Diode Isolated Module 430 Amperes / Up to 2200 Volts Description: OUTLINE DRAWING Powerex Dual SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. A R B C J F K G D 1 2 3 L H P - M10 THD (3 TYP.) Q - DIA. (4 TYP.) M LD42__43 Dual SCR/Diode TM POW-R-BLOK Module 430 Amperes / 1800-2200 Volts T - (2 TYP.) S LD42 Outline Dimensions Dimension Inches Millimeters A 5.91 150.0 B 4.88 124.0 C 4.41 112.0 D 2.36 60.0 E 2.05 52.0 F 1.97 50.0 G 1.89 48.0 H 1.73 44.0 J 1.22 31.0 K 1.10 28.0 Ordering Information: L 1.00 25.4 Select the complete eight-digit module part number from the table below. Example: LD421843 is a 1800 Volt, 430 Ampere Dual SCR Isolated TM POW-R-BLOK Module M 0.69 17.5 N 0.39 10.0 4 5 E N 5 4 2 1 3 CONNECTION DIAGRAM Type LD42 Voltage Volts (x100) Current Amperes (x10) 18 20 22 43 P M10 Metric M10 Q 0.26 Dia. 6.5 Dia. R 0.24 6.0 S 0.12 3.0 T .110 x .032 2.5 x 0.8 Features: Electrically Isolated Heatsinking Aluminum Nitride Isolator Compression Bonded Elements Metal Baseplate Low Thermal Impedance for Improved Current Capability UL Recognized Benefits: No Additional Insulation Components Required Easy Installation No Clamping Components Required Reduce Engineering Time Applications: Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Note: Dimensions are for reference only. Revision Date: 03/09/2015 LD42__43 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com POW-R-BLOKTM Dual SCR/Diode Isolated Module 430 Amperes / Up to 2200 Volts Absolute Maximum Ratings Characteristics Conditions Repetitive Peak Forward and Reverse Blocking Voltage Symbol Units VDRM & VRRM up to 2200 V VRSM VRRM + 100 V TC=70°C IT(RMS) 800 A 180° Conduction, TC=80°C 180° Conduction, TC=70°C 60 Hz, 100% VRRM reapplied, Tj=25°C 60 Hz, No VRRM reapplied, Tj=25°C 60 Hz, 100% VRRM reapplied, Tj=125°C 60 Hz, No VRRM reapplied, Tj=125°C 50 Hz, 100% VRRM reapplied, Tj=25°C 50 Hz, No VRRM reapplied, Tj=25°C 50 Hz, 100% VRRM reapplied, Tj=125°C 50 Hz, No VRRM reapplied, Tj=125°C IT(AV) IT(AV) ITSM ITSM ITSM ITSM ITSM ITSM ITSM ITSM 430 510 14,000 21,000 12,000 18,000 12,000 17,000 10,000 15,000 A A A A A A A A A A Peak Three Cycle Surge Current, Non-Repetitive 60 Hz, 100%VRRM reapplied, Tj=125C ITSM 9,600 A Peak Ten Cycle Surge Current, Non-Repetitive 60 Hz, 100%VRRM reapplied,Tj=125C ITSM 7,500 Non-Repetitive Peak Blocking Voltage (t < 5 msec) RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle (No Vrrm reapplied) 2 I t for Fusing for One Cycle (100% Vrrm reapplied) Maximum Rate-of-Rise of On-State Current, (Repetitive) Operating Temperature 2 8.3 milliseconds, Tj=25°C It 8.3 milliseconds, Tj=125°C I2t 2 1.82 x 10 1.35 x 10 10 milliseconds, Tj=25°C It 1.51 x 10 10 milliseconds, Tj=125°C I2t 1.13 x 10 8.3 milliseconds, Tj=25°C 2 It 2 8.1 x 10 8.3 milliseconds, Tj=125°C It 6.0 x 10 10 milliseconds, Tj=25°C I2t 6.7 x 10 2 10 milliseconds, Tj=125°C It Per JEDEC Standard 397 5.2.2.6 di/dt 5.0 x 10 200 A 6 A sec 6 A2 sec 6 A2 sec 6 A2 sec 2 5 A2 sec 5 A2 sec 5 A2 sec 5 A2 sec A/µs TJ -40 to +125 Tstg -40 to +150 °C Module Weight, Typical 55 6 110 12 1500 in. – Lb. Nm in. – Lb. Nm g 3.30 lb V Isolation @ 25C 3000 V Storage Temperature Max. Mounting Torque, M6 Mounting Screw Max. Mounting Torque, M10 Terminal Screw Vrms °C Revision Date: 03/09/2015 LD42__43 Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com POW-R-BLOKTM Dual SCR/Diode Isolated Module 430 Amperes / Up to 2200 Volts Electrical Characteristics, TJ=25°C unless otherwise specified Characteristics Symbol Test Conditions Repetitive Peak Forward Leakage Current IDRM Up to 2200V, TJ=125°C 80 mA Repetitive Peak Reverse Leakage Current IRRM Up to 2200V, TJ=125°C 80 mA VTM / VFM ITM / IFM =1500A 1.77 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125°C, I = 15%IT(AV) to πIT(AV) 0.88 0.66 V mΩ Threshold Voltage, High-level Slope Resistance, High-level V(TO)2 rT2 TJ = 125°C, I = πIT(AV) to ITSM 1.34 0.32 V mΩ Peak On-State Voltage VTM Coefficients, Full Range Min. VTM = V(TO)1 + rT1 I VTM = V(TO)2 + rT2 I TJ = 125°C, I = 10A to 6kA VTM / VTM = A+ B Ln I +C I + D Sqrt I Minimum dV/dt Max. A= B= C= D= Units 0.766 -1.046E-02 1.805E-04 2.00E-02 dV/dt Exponential to VDRM Tj=125°C, Gate Open 1000 Typ. V/µs Gate Trigger Current IGT Tj=25°C, VD=12V 200 mA Gate Trigger Voltage VGT Tj=25°C, VD=12V 3.0 Volts Non-Triggering Gate Voltage VGDM Tj=125°C, VD= ½ VDRM 0.25 Volts Peak Forward Gate Current IGTM 4.0 Amp Peak Reverse Gate Voltage VGRM 5 Volts Thermal Characteristics Characteristics Symbol Max. Units 0.0325 0.0650 °C/W °C/W Thermal Resistance, Junction to Case RΘJ-C Per Module, both conducting Per Junction, both conducting Thermal Impedance Coefficients ZΘJ-C ZΘJ-C= K1 (1-exp(-t/1)) K1 = 8.03E-04 1 = 3.39E-04 + K2 (1-exp(-t/2)) + K3 (1-exp(-t/3)) K2 = 1.03E-02 2 = 3.15E-03 K3 = 1.64E-02 3 = 0.106 + K4 (1-exp(-t/4)) Per Module K4 = 3.75E-02 4 = 2.066 0.01 Thermal Resistance, Case to Sink Lubricated RΘC-S °C/W Revision Date: 03/09/2015 LD42__43 POW-R-BLOKTM Dual SCR/Diode Isolated Module 430 Amperes / Up to 2200 Volts Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance ( Tj = 125 °C ) (Junction to Case, Per Junction) 0.070 0.060 4 Thermal Impedance - Rjc - °C/W On-State Voltage - Vtm / Vfm - Volts 5 3 2 1 0.050 0.040 0.030 0.020 0.010 0 10 100 1000 10000 0.000 0.0001 0.001 0.01 0.1 Maximum On-State Power Dissipation 120 90° 600 Max. Case Temperature - Tcase -°C_ Max. Power Dissipation Per Junction - Watts_ 130 180° 120° 60° 500 30° 400 300 200 180 0 360 CONDUCTION ANGLE 110 200 300 400 360 CONDUCTION ANGLE 90 15° 30° 0 180 0 100 80 100 100 100 (Sinusoidal Waveform) 700 0 10 Maximum Allowable Case Temperature (Sinusoidal Waveform) 800 15° 1 Time - t - Seconds Instantaneous On-State Current - Itm / Ifm - Amperes 60° 90° 180° 120° 70 500 0 Average On-State Current - It(av) / If(av) - Amperes 100 200 300 400 500 Average On-State Current - It(av) / If(av)- Amperes Maximum On-State Power Dissipation Maximum Allowable Case Temperature (Rectangular Waveform) (Rectangular Waveform) 1200 130 270° Max. Case Temperature - Tcase -°C_ Max. Power Dissipation Per Junction - Watts_ 120 360° 1000 180° 800 120° 90° 60° 600 30° 15° 400 200 180 0 360 110 0 360 CONDUCTION ANGLE 90 80 15° 70 30° 60° 90° 60 CONDUCTION ANGLE 180 0 100 120° 180° 270° 360° 50 0 100 200 300 400 500 600 Average On-State Current - It(av) / If(av) - Amperes 700 800 0 100 200 300 400 500 600 700 800 Average On-State Current - It(av) / If(av) - Amperes Revision Date: 03/09/2015 LD42__43 POW-R-BLOKTM Dual SCR/Diode Isolated Module 430 Amperes / Up to 2200 Volts Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 www.pwrx.com Gate Characteristics: Trigger Limits Gate Characteristics: Power Curves 9 30 8 Gate Trigger Voltage - Vgt (V) 7 6 5 -40C 4 25C 3 130C 20 1ms 100Wp 15 10 5ms 20Wp 2 5 Min Vg DC 1 DC Vgd Min Vg DC 10ms, 10Wp 0 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0 Gate Trigger Current - Igt (A) 1 2 3 4 5 6 7 8 9 10 Gate Trigger Current - Igt (A) Surge/Overload Current Ratings - 50 & 60Hz 2.50 Itsm (125oC) (60Hz) Itsm (25C) (60Hz) Itsm (125C) (50Hz) Itsm (25C) (50Hz) 2.00 It(ov)/Itsm Gate Trigger Voltage - Vgt (V) Max Vg 25 Max Vg = 12kA = 18kA = 10kA = 15kA 1.50 1.00 Vr = 0V 0.50 Vr = Vrrm 0.00 0.1 1 10 100 Number of Cycles Revision Date: 03/09/2015