COMPONENTS PRODUCT INFORMATION NEW CONNECTOR Compact SMT Type Automotive Connectors MB-0180-1 MX34R Series February 2008 RoHS Compliant 20 pos. 32 pos. An SMT (Surface Mount Technology) type has been added to the automotive use MX34 Series. The new type is a straight pin-header available in 20-position and 32position. It adopts PPS as the housing resin to withstand the reflow mounting temperature. Screws are not necessary due to the hold-downs equipped on both sides for board mounting. Features •Compact straight SMT type with double row staggered 2.2 mm side pitch. (Available in 20-position and 32-position.) •Fixed to board by hold-downs on both sides, screw mounting is not necessary. •Can be mated with existing MX34 Series socket connector. •Adopts heat resistant PPS resin and is compatible with soldering by reflow mounting. •Soldering area of terminal appears on both sides of the connector so soldering can be easily confirmed. •With a shape that has a consideration for pick-and-place by automated mounting. General Specifications •Rated Current: 3A •Contact Resistance: 5m ohm max. (initial) •Dielectric Withstanding Voltage: AC 1000V (per minute) •Operating Temperature: •Insulation Resistance: 100M ohm min •Durability: 50 mating cycles •Applicable Board Thickness: t1.6 mm -40 Deg. C to +85 Deg. C 1/6 JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. MB-0180-1 ￭Pinheader Materials and Finishes Components Housing Pin terminal Hold-down Materials and Finishes PPS GF40 Copper alloy/ Sn plating over Ni Brass/ Sn plating over Ni Part Number and SJ Drawing No. of Contacts 20 32 Part Number MX34R20VF1 MX34R32VF1 SJ Drawing SJ106351 SJ106352 * Connectors for the opposite side (for reference) ￭Socket Housing No. of Contacts 20 32 Part Number MX34020SF1 MX34032SF1 SJ Drawing SJ038752 SJ038756 ￭Socket Contact Part Number M34S75C4F1 M34S75C4F2 M34S75C4F3 M34S75C4F4 Applicable Wire AVSS0.3mm 2 , CHFUS0.22mm 2 ~0.35mm 2 AVSS0.5mm 2 , CHFUS0.5mm 2 ~0.75mm 2 CAN SD 0.35mm 2 (note1) AVSS0.85mm 2 (note2) SJ Drawing SJ038527 SJ038528 SJ038747 SJ038893 Note 1: M34S75CF3 and M34S75CF4 can only be inserted in double row cavities on both ends, four housing cavities in total. 2/6 JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. MB-0180-1 Outer Dimensions ■ MX34R20VF1 (SJ Drawing: SJ106351) Assembly Lot No. (Adsorption area) (Adsorption area) 3/6 JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. MB-0180-1 4/6 JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. MB-0180-1 ■ MX34R32VF1 (SJ Drawing: SJ106352) Assembly Lot No. (Adsorption area) (Adsorption area) 5/6 JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. MB-0180-1 Others Specification Specification JACS-1754-10 Notice: Products shown in this leaflet are Handling Handling Instructions Instructions JACS-1754 Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. 6/6