MM80-204B1- 1

COMPONENTS PRODUCT INFORMATION
NEW
DDR SDRAM SODIMM Connector
MM80 Series
CONNECTOR
MB-0213-1
September 2010
RoHS Compliant
The MM80 Series is a 204 position DDR3 SDRAM SODIMM* socket which is
compatible with the JEDEC MO-268C standard.
It is a highly reliable right-angle SMT type connector with a unique contact structure for
improved contact force, a design that prevents incomplete mating by not locking
unless the DIMM board is completely inserted, and stable contact achieved by assured
positioning of the DIMM board.
DDR3: Double Data Rate 3
SDRAM: Synchronous Dynamic Random Access Memory
SODIMM: Small Outline Dual In-line Memory Module
Features
„DDR3 SDRAM SODIMM 204 pos. socket compatible with JEDEC standard MO-268C.
„Mis-mating prevention key is compatible with operation voltage 1.5V (DDR3).
„Right-angle SMT type available in two connector heights: 5.2mm and 9.2mm.
„To meet system requirements, products compatible with reverse mounting are also
available (5.2mm and 9.2mm height).
General Specifications
„No. of Contacts: 204 pos.
„Contact Resistance: 40mΩ max.
„Dielectric Withstanding Voltage: AC 500Vr.m.s (per minute)
„Contact Pitch: 0.6mm
„Operating Temperature: -55 to+105 Deg. C
„Rated Current: 0.3A
„Insulation Resistance: 100MΩ min.
„Durability: 25 mating cycles
„Applicable DIMM Board Thickness: 1.0 ± 0.1mm
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
1/8
MB-0213-1
Materials and Finishes
Component
Material / Finish
Metal Latch
Stainless / Sn plating
Insulator
Glass filled LCP
Contact
Contact area: Phosphor bronze / 0.1μm min. Au plating over Ni
Terminal area: Phosphor bronze / Au flash plating over Ni
Ordering Information
MM80 - 204 B 1 - * 1 R
R: Reverse Mounting
None: Standard Mounting
Series
No. of Contacts
Contact Finish
1: 0.1µm min. Au plating over Ni
Socket Type
B: Latch Type SMT Mounting
Modification Code
None: Product Height 5.2mm, without boss
E: Product Height 9.2mm, without boss
Key Type
1: TYPE A (1.5V)
Part Number and SJ Drawing Number
Product
Height
Boss
Mounting
Direction
SJ Drawing
MM80-204B1- 1
5.2
No
Standard
SJ110291
MM80-204B1- 1R
5.2
No
Reverse
SJ110255
MM80-204B1-E1
9.2
No
Standard
SJ110292
MM80-204B1-E1R
9.2
No
Reverse
SJ110282
Part Number
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
Specification
JACS-10662
2/8
MB-0213-1
MM80-204B1- 1
Detail A
Applicable P.C.B. Dimensions (for Reference)
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
3/8
MB-0213-1
MM80-204B1- 1R
Detail A
Applicable P.C.B. Dimensions (for Reference)
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
4/8
MB-0213-1
MM80-204B1-E1
Detail A
Applicable P.C.B. Dimensions (for Reference)
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
5/8
MB-0213-1
MM80-204B1-E1R
Detail A
Applicable P.C.B. Dimensions (for Reference)
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
6/8
MB-0213-1
Applicable Dimensions of Module (For Reference)
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
7/8
MB-0213-1
Notice: Products shown in this brochure are
made for the applications listed below. However,
if the above-mentioned products are to be used in
aerospace devices, marine cable-connection
devices, atomic power control systems, medical
equipment for life-support systems, or any other
specific application requiring extremely high
reliability, please contact JAE for further
information.
Recommended applications: Computers, Office
machines, Measuring devices,
Product Marketing Division
Telecommunication devices (Terminals, Mobile
Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 devices), AV devices, Household applications, FA
Phone: +81-3-3780-2787 FAX: +81-3-3780-2946
devices, etc.
* The specifications in this brochure are subject to change without notice. Please contact JAE for information.
JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd.
8/8