Model PSxxM / PSxxL Slide Potentiometer Molded Element 100,000 Cycle Life Metal or Plastic Shaft Options With/Without LED Illumination With/Without Dust Cover RoHS Compliant MODEL STYLE Dual Gang Without LED PSxxM Single Gang With LED PSxxL ELECTRICAL1 Resistance Range, Ohms 500 -1M Standard Resistance Tolerance 20% Resistance Tapers A,B,C Residual Resistance Terminals 1 to 2:Less than 10 ohms Terminals 2 to 3:Less than 30 ohms Input Voltage, Maximum Linear B taper: 200 Vac Other tapers: 150 Vac Linear B taper: 20mm: 0.1W / 0.05W, 30mm: 0.2W / 0.1W 45mm: 0.25W / 0.125W, 60mm:0.2W / 0.2W Power rating, Watts (Single Unit / Dual Unit) Other tapers: 20mm: 0.05W / 0.025W, 30mm: 0.1W / 0.05W 45mm: 0.125W / 0.06W, 60mm:0.1W / 0.1W Dielectric Strength 300Vac, 1 minute Insulation Resistance, Minimum 10M ohms at 250Vdc/ 1 minute Sliding Noise Less than 100mV Gang Error ±3dB (-40dB to 0dB) MECHANICAL Static Stop Strength, Minimum 5.0 Kgf/cm Operating Force 10gf to 100gf Detent Slip-out force 30gf to 200gf DURABILITY Sliding Life 1 100,000 cycles Specifications subject to change without notice. BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 March 19, 2012 Website: www.bitechnologies.com page 1 of 6 BI technologies Model PSxxM / PSxxL ORDERING INFORMATION2 Model PSxxM (Without LED) PS30M – 0 P C 1 F B R100K N Dust Cover * Blank = with Dust Cover N = without Dust Cover Model Style Travel in millimeters 20, 30, 45, 60 Total Resistance Tapers: See Below A = Audio B = Linear (3B taper for Dual Gang) C = Reverse Audio L = Linear (Dual Gang Only) Detent 0 = Without 1 = Center Lever Material: P = Plastic M = Metal Lever Type: See Below Lever Length: See “L” Code Below Frame Option: Blank = Without F = With Model PSxxL (With LED) PS45L – R 0 1 F B R100K N Dust Cover * Blank = with Dust Cover N = without Dust Cover Model Style Travel in millimeters 20, 30, 45, 60 LED Color: R = Red G = Orange Y = Yellow N = Green Total Resistance Detent 0 = Without 1 = Center Lever Length: 1 = 15mm 2 = 19mm Frame Option: Blank = Without F = With Tapers: See Below A = Audio B = Linear (See “L” Taper graph) C = Reverse Audio STANDARD RESISTANCE VALUES, OHMS 500 2 1K 2K 5K 10K 20K 50K 100K 200K 500K 1 MEG Contact our customer service for custom designs and features. BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 March 19, 2012 Website: www.bitechnologies.com page 2 of 6 BI technologies Model PSxxM / PSxxL Tapers For Dual Gang units ONLY, the Standard Taper is a 3B taper If Linear Taper is desired, use “L” taper option BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 March 19, 2012 Website: www.bitechnologies.com page 3 of 6 BI technologies Model PSxxM / PSxxL Plastic Lever Types (For PSxxM Only) * Dust Cover option not offered for levers less than 10 mm in length Metal Lever Types (For PSxxM Only) * Dust Cover option not offered for levers less than 10 mm in length BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 March 19, 2012 Website: www.bitechnologies.com page 4 of 6 BI technologies Model PSxxM / PSxxL OUTLINE DRAWING Model PSxxM (Without LED) With Dust Cover Without Dust Cover For PSxxM and PSxxL MODEL A B C D F G PS20M PS20L 35 31 20 30 5 12.5 PS30M PS30L 45 41 30 40 10 22.5 PS45M PS45L 60 56 45 55 15 32.5 PS60M PS60L 75 71 60 70 22.5 47.5 BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 March 19, 2012 Website: www.bitechnologies.com page 5 of 6 BI technologies Model PSxxM / PSxxL Model PSxxL (With LED) With Dust Cover Without Dust Cover CIRCUIT DIAGRAM PSxxL (Single gang with LED) PSxxM (Dual gang) BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 March 19, 2012 Website: www.bitechnologies.com page 6 of 6 BI technologies