Electrical / Environmental T1/CEPT/ISDN-Pri Telecom Products RoHntSfor lia Comp dels o ‘LF’ M • • • • • Meets the required 1500 Vrms line isolation Standard Operating Temperature Range 0°C to +70°C Extended Operating Temperature Range -40°C to +85°C RoHS Peak Solder Rating 260°C Non-RoHS Peak Solder Rating 235°C Specifications P/N1 RoHS2 HS00-005874 HS00-015094 HS93-987064 HS93-977314 HS00-00543 HS93-97725 HS00-000914 HS00-002274 HS93-987054 HS00-001974 HS00-00161 HS00-00214 HS00-00571 HS00-00583 HS00-02616 HS00-02679 HS00-98679 HS00-99629 HS00-99630 HS00-99706 HS93-01155 HS93-01156 HS93-01163 HS93-02060 HT00-05077 HT00-02027 HT00-02028 HT00-03035 HS00-00727 HS00-99576 HS00-99641 HS93-01260 HT00-03026 HT00-03027 HT00-03086 HT00-03093 HT00-04152 3 BI Notes: 3 3 3 LF 3 3 3 3 3 LF LF LF LF LF LF LF LF LF LF LF LF LF LF LF 3 3 3 LF LF LF LF LF LF LF LF LF LF Transformer Turns Ratio5 (±5%) Primary : Secondary OCL (mH Min.) Style Pitch Packaging (mm) Length Width Single 1:2CT 1.20 6-pin DIL 100 mil Single 1:1/1.26 1.50 6-pin DIL 100 mil Single 1:1:1 (1:2CS) 1.20 6-pin DIL 100 mil Single 1CT:2CT 1.20 10-pin DIL 100 mil Dual 1CT:2CT & 1:1.36CT 1.60 & 1.60 12-pin SMT 100 mil Dual 1CT:2 & 1CT:2CT 1.20 & 1.20 12-pin SMT 100 mil Dual 1:2CT & 1.36:1 1.20 & 1.20 14-pin DIL 100 mil Dual 1:1/1.26 & 1:2CT 1.50 & 1.20 14-pin DIL 100 mil Dual 1:2CT & 1:1.36 1.20 & 1.20 14-pin DIL 100 mil Dual 1CT:1CT & 1CT:3CT:1 1.20 & 1.20 16-pin DIL 100 mil Dual 1CT:1CT & 1CT:2.4CT 1.00 & 1.00 16-pin SMT 50 mil Dual 1:1.36CT & 1:2CT 1.50 & 1.50 16-pin SMT 50 mil Dual 1CT:1CT & 1CT:2CT 1.20 & 1.20 16-pin SMT 50 mil Dual 1CT:2CT & 1CT:2CT 1.20 & 1.20 16-pin SMT 50 mil Dual 1CT:1CT & 2CT:1 1.50 & 1.50 16-pin SMT 50 mil Dual 1CT:1CT & 2.4CT:1 1.50 & 1.50 16-pin SMT 50 mil Dual 1:2CT & 1CT:1.36CT 1.20 & 1.20 16-pin SMT 50 mil Dual 1:2 & 1:2 1.50 & 1.50 16-pin SMT 50 mil Dual 1:1.26 & 1:1.26 1.50 & 1.50 16-pin SMT 50 mil Dual 1CT:1.41CT & 1CT:1.41CT 1.00 & 1.00 16-pin SMT 50 mil Dual 1CT:2CT & 1CT:1.36CT 1.50 & 1.50 16-pin SMT 50 mil Dual 2CT:1CT & 1CT:1.36CT 1.20 & 1.20 16-pin SMT 50 mil Dual 2CT:1/1.26 & 2CT:1/1.26 1.50 & 1.50 16-pin SMT 50 mil Dual 1:1.15CT & 1CT:2CT 1.20 & 1.20 16-pin SMT 50 mil Dual 1:1.36CT & 1CT:2CT 1.20 & 1.20 16-pin SMT 50 mil Octal 1:2 1.50 32-pin SMT 50 mil Octal 1:1.15 1.50 32-pin SMT 50 mil Octal 1:1 1.20 32-pin SMT 50 mil Octal Tx: 1:2 & Rx: 2CT:1 1.50 & 1.50 40-pin SMT 50 mil Octal Tx: 1:2.4 & Rx: 1:1 1.20 & 1.20 40-pin SMT 50 mil Octal Tx: 1:1.36CT & Rx: 1:2CT 1.20 & 1.20 40-pin SMT 50 mil Octal Tx: 1:2CT & Rx: 1CT:1 1.20 & 1.20 40-pin SMT 50 mil Octal Tx: 1:1.36CT & Rx: 1:1 1.20 & 1.20 40-pin SMT 50 mil Octal Tx: 1:2.4 & Rx: 1:1 1.00 & 1.00 40-pin SMT 50 mil Octal Tx: 1:1.26CT & Rx: 1:1.26CT 1.20 & 1.20 40-pin SMT 50 mil Octal Tx: 1:1.36 & Rx: 1:1.36CT 1.20 & 1.20 40-pin SMT 50 mil Octal Tx: 1:1.15 & Rx: 1:2 1.50 & 1.50 40-pin SMT 50 mil Octal Tx: 1:2CT & Rx: 1:2CT 1.20 & 1.20 40-pin SMT 50 mil 12.70 12.70 12.70 14.22 17.20 17.27 20.3 20.32 20.57 25.40 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.83 25.40 25.40 25.40 29.80 29.80 29.80 29.80 29.80 27.94 27.94 27.62 27.62 28.58 8.90 8.89 8.89 14.22 12.80 15.30 9.8 9.80 10 10.00 9.65 9.65 9.53 9.53 9.65 9.65 9.65 9.65 9.65 9.65 9.65 9.65 9.26 9.65 9.53 10.92 10.92 10.92 16.26 16.26 16.26 16.26 16.26 16.26 16.26 16.00 16.00 16.26 Height Hi-Pot (Vrms) 6.35 6.35 6.35 10.20 6.00 8.89 6.35 7.37 6.6 9.80 5.50 5.50 6.22 6.22 6.50 6.50 5.50 5.50 5.50 5.50 5.50 5.50 6.06 5.50 6.22 7.34 7.34 7.34 6.95 6.95 6.95 6.95 6.95 5.77 5.77 5.77 5.77 6.95 1500 1500 1500 3000 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 (1) For Tape & Reel Packaging, add a “TR” suffix to the end of the Part Number when ordering, e.g. HS00-00161TR or HS00-00161LFTR (for RoHS Compliant) (2) Add a “LF” suffix to the Part Number for RoHS compliant parts, e.g. HS93-02060LF or HS93-02060LFTR (for Tape & Reel) (3) Contact BI Technologies for RoHS compliant part availability. (4) Tube Packaging only. (5) CT IS Center Tap & CS IS Split Center Tap 2006 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE www.bitechnologies.com We reserve the right to change specifications without prior notice 91 ISDN S-Interface Telecom Products • • • • • Sr RCoompH liant fo ls ode ‘LF’ M Meets the required 1500 Vrms line isolation Standard Operating Temperature Range 0°C to +70°C Extended Operating Temperature Range -40°C to +85°C RoHS Peak Solder Rating 260°C Non-RoHS Peak Solder Rating 235°C Specifications BI P/N1 RoHS2 HS00-001934 HS93-020454 HS00-002324 HS00-00151 HS00-00152 HS00-00840 HS93-01027 HS93-97727 HT00-03083 HS93-002214 HS00-00604 HS93-01048 HS93-01255 Notes: 3 LF 3 3 3 3 3 3 LF 3 3 3 LF Transformer Turns Ratio5 (±5%) Primary : Secondary OCL (mH Min.) Style Pitch Single Single Dual Dual Dual Dual Dual Dual Dual Dual Dual Dual Quad 1CT:2CT 1:1 1:2 & 1:2 1CS:2.5CS & 1CS:2.5CS 1CS:2.5CS & 1CS:2.5CS 1:2.5 & 1:2.5 1:1 & 1:1 1:2 & 1:2 1split:1split & 1split:1split 1CT:2 & 1CT:2 1:2 & 1:2 1CT:1CT & 1CT:1CT 1:1 22 1.20 22 & 22 22 & 22 22 & 22 22 & 22 22 & 22 22 & 22 30 & 30 30 & 30 30 & 30 30 & 30 1.20 6-pin DIL 6-pin SMT 16-pin DIL 16-pin SMT 16-pin SMT 16-pin SMT 16-pin SMT 16-pin SMT 16-pin SMT 18-pin DIL 20-pin SMT 20-pin SMT 16-pin SMT 200 mil 100 mil 100 mil 100 mil 100 mil 100 mil 100 mil 100 mil 100 mil 100 mil 100 mil 100 mil 100 mil Packaging (mm) Length Width 14.20 7.62 23.37 25.32 24.00 24.00 24.00 24.13 25.40 29.06 27.74 29.72 24.13 14.20 9.91 14.22 14.99 18.29 18.29 18.29 18.29 12.70 10.62 18.44 17.78 18.29 Height Hi-Pot (Vrms) 10.20 6.35 10.20 8.89 9.30 9.91 9.91 10.16 7.30 16.39 10.92 8.28 9.91 2000 2000 2000 1500 2000 2000 2000 2000 2000 1500 3000 1500 2000 (1) For Tape & Reel Packaging, add a “TR” suffix to the end of the Part Number when ordering, e.g. HS93-03083TR or HS93-03083LFTR (for RoHS Compliant) (2) Add a “LF” suffix to the Part Number for RoHS compliant parts, e.g. HS93-01255LF or HS93-01255LFTR (for Tape & Reel) (3) Contact BI Technologies for RoHS compliant part availability. (4) Tube Packaging only. (5) CT IS Center Tap & CS IS Split Center Tap ISDN U-Interface Telecom Products • • • • Meets the required 1500 Vrms line isolation Standard Operating Temperature Range 0°C to +70°C Extended Operating Temperature Range -40°C to +85°C Withstands 235°C IR reflow for 1 minute Specifications BI P/N1 RoHS2 HS00-002253 HM00-97500D3 HS00-002263 Notes: 92 (1) (2) (3) (4) 2 2 2 Transformer Single Single Single Turns Ratio4 (±5%) Primary : Secondary OCL (mH Min.) 1.65:1CT 1:1.25CT 1.50:1CT 13 25.8 25.6 Style 8-pin TH / DS 10-pin TH / DS 10-pin TH / DS Packaging (mm) Pitch Length Width Height 150 mil 150 mil 150 mil - - - Hi-Pot (Vrms) 2000 2000 2000 Add a “LF” suffix to the Part Number for RoHS compliant parts Contact BI Technologies for RoHS compliant part availability. Tray Packaging only. CT is Center Tap & CS is Split Center Tap MAGNETIC COMPONENTS SELECTOR GUIDE 2006 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com T3/DS3/E3/STS-1 Telecom Products • • • • • Sr RCoompH liant fo ls ode ‘LF’ M Meets the required 1500 Vrms line isolation Standard Operating Temperature Range 0°C to +70°C Extended Operating Temperature Range -40°C to +85°C RoHS Peak Solder Rating 260°C Non-RoHS Peak Solder Rating 235°C Specifications P/N1 RoHS2 HS00-00588 HS00-00710 HT00-02107 HS00-02601 LF LF LF LF BI Notes: Transformer Turns Ratio4 (±5%) Primary : Secondary Single Single Single Single OCL (mH Min.) 1:2CT 1:1 1CT:1CT 1:1 19 100 40 600 Packaging (mm) Length Width Height Style Pitch 6-pin SMT 6-pin SMT 6-pin SMT 6-pin SMT 100 mil 100 mil 100 mil 100 mil 7.62 7.62 7.62 7.62 10.62 9.91 9.91 9.91 6.35 6.35 6.35 6.35 Hi-Pot (Vrms) 1500 1500 1500 1500 (1) For Tape & Reel Packaging, add a “TR” suffix to the end of the Part Number when ordering, e.g. HT00-02107TR or HT00-02107LFTR (for RoHS Compliant) (2) Add a “LF” suffix to the Part Number for RoHS compliant parts, e.g. HS00-02601LF or HS00-02601LFTR (for Tape & Reel) (3) Contact BI Technologies for RoHS compliant part availability. (4) CT is Center Tap & CS is Split Center Tap Electrical / Environmental HDSL Telecom Products • • • • Conforms to ANSI, ITU and ETSI standards Meets standard dielectric withstanding voltage requirements Standard Operating Temperature Range Extended Operating Temperature Range 0°C to +70°C -40°C to +85°C Specifications BI P/N HT81-00628 HT81-00629 HT81-00630 HT81-99721 HT81-99724 HT81-99628 HT81-99647 HT81-99649 HT81-99722 HT81-99723 HT81-99648 HT81-99650 HT81-99651 HT81-99709 HT81-99711 HT81-00553 HT81-99710 HT81-00631 HT81-00632 HT81-00552 HT81-00633 Notes: RoHS1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Line Rate (Kbps) Turns Ratio Chip: Line (±3%) OCL (mH Min.) Packaging Style Hi-Pot (Vrms) 272 416 528 784 784 784 784 784 1168 1168 1168 1168 1168 1168 1168 1552 1552 1808 2064 2320 2320 1:1:1CT 1:1:1CT 1:1:1CT 1:1:1 1.8:1CT 1.8CT:1CT 1:1:1CT 1:1:2CT 1:1:1 2.3:1 1:1:2CT 1:1:1CT 1.8CT:1CT 1:1:1CT 3:1CT 2.3:1 2.3:1CT 2.3:1 2.3:1 1:1:1 2.3:1 8.0 5.0 3.5 3.0 3.0 2.8 3.0 3.0 2.0 2.0 2.0 2.0 2.1 2.0 2.0 1.6 2.0 1.3 1.1 1.0 1.0 10-pin TH / DS-23/11 10-pin TH / DS-23/11 10-pin TH / DS-23/11 10-pin SMD/EP-13 10-pin SMD/EP-13 10-pin TH / DS-23/11 10-pin TH / DS-23/11 10-pin TH / DS-23/11 10-pin SMD/EP-13 10-pin SMD/EP-13 10-pin TH / DS-23/11 10-pin TH / DS-23/11 10-pin TH / DS-23/11 10-pin TH / DS-23/11 10-pin TH / DS-23/11 10-pin SMD/EP-13 10-pin TH / DS-23/11 10-pin SMD/EP-13 10-pin SMD/EP-13 10-pin SMD/EP-13 10-pin SMD/EP-13 1500 1500 1500 1500 1500 2000 1500 1500 1500 1500 1500 2000 2500 1500 1500 1500 1500 1500 1500 1500 1500 (1) Add a “LF” suffix to the Part Number for RoHS compliant parts (2) Contact BI Technologies for RoHS compliant part availability. 2006 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE www.bitechnologies.com We reserve the right to change specifications without prior notice 93 Electrical / Environmental VDSL Telecom Products • • • • • Sr RCoompH liant fo ls o ‘LF’ M de Meets standard dielectric withstanding voltage requirements Standard Operating Temperature Range 0°C to +70°C Extended Operating Temperature Range -40°C to +85°C RoHS Peak Solder Rating 260°C Non-RoHS Peak Solder Rating 235°C Specifications BI P/N1 RoHS2 HT82-050873 HT82-05099 Notes: Turns Ratio Chip: Line (±3%) Style Pitch 1:1CT 1:1CT 6-pin TH 6-pin SMT 2.54 2.54 LF LF Packaging (mm) Length Width 12.7 7.61 Height Hi-Pot (Vrms) 6.35 6.35 3000 3000 8.89 9.91 (1) For Tape & Reel Packaging, add a “TR” suffix to the end of the Part Number when ordering, e.g. HT82-05099TR or HT82-05099LFTR (for RoHS Compliant) (2) Add a “LF” suffix to the Part Number for RoHS compliant parts, e.g. HT82-005087LF (3) Tube Packaging only Electrical / Environmental ADSL Telecom Products • • • • Conforms to ANSI, ITU and ETSI standards Meets standard dielectric withstanding voltage requirements Standard Operating Temperature Range Extended Operating Temperature Range 0°C to +70°C -40°C to +85°C Specifications BI P/N HT84-00210 HT84-00211 HT84-99728 HT84-00594 HT84-00595 HT84-00597 HT84-01066 HT84-99726 HT84-99729 HT84-00008 HT84-00025 HT84-00222 HT84-00596 HT84-00879 HT84-00880 HT84-00881 HT84-99725 HT84-99727 HT84-99730 Notes: Notes: 94 RoHS1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Application CO/CP CO/CP CO/CP COE COE COE COE COE COE CPE CPE CPE CPE CPE CPE CPE CPE CPE CPE Turns Ratio Chip: Line (±3%) 1:1.423 1:1.95 1:1:1:1 1:1:2:2 1.41:1 1:1.41 1:1.1 1CT:1.2 1.41:1 1:1:1:1 1:1:1:1 1:1:1:1 1:1:1:1 1:1:1:1 1:1:1:1 1:1:1:1 1:1:1:1 1.8:1 1:1:1:1 OCL (mH Min.) Packaging Style Hi-Pot (Vrms) 1.50 1.50 5.00 0.110 0.940 0.475 1.75 2.75 0.940 0.840 0.840 0.440 0.410 0.470 0.470 0.470 0.440 12.96 0.410 10-pin SMT/EP-13 10-pin SMT/EP-13 10-pin TH/SMT/EP-13 10-pin TH/SMT/EP-13 10-pin TH/SMT/EP-13 10-pin TH/SMT/EP-13 10-pin SMT/EP-13 10-pin TH/SMT/EP-13 10-pin TH/DS23/11 10-pin SMT/EP-13 10-pin SMT/EP-13 10-pin SMT/EP-13 10-pin TH/SMT/EP-13 10-pin SMT/EP-13 10-pin SMT/EP-13 10-pin SMT/EP-13 10-pin TH/SMT/EP-13 10-pin TH/SMT/EP-13 10-pin TH/SMT/EP-13 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 (1) Add a “LF” suffix to the Part Number for RoHS compliant parts (2) Contact BI Technologies for RoHS compliant part availability. (1) Turns Ratio is referenced chip side to media side MAGNETIC COMPONENTS SELECTOR GUIDE 2006 EDITION We reserve the right to change specifications without prior notice. www.bitechnologies.com Electrical / Environmental CMC for Networking & Telecom Products RoHntSfor lia Comp dels o ‘LF’ M • • • • • • Conforms to ANSI, ITU and ETSI standards Meets standard dielectric withstanding voltage requirements Standard Operating Temperature Range 0°C to +70°C Extended Operating Temperature Range -40°C to +85°C RoHS Peak Solder Rating 260°C Non-RoHS Peak Solder Rating 235°C Specifications BI P/N1 RoHS2 No. of Lines OCL (mH) Style Pitch 3 2 2 2 2 4 4 4 4 4 4 4 4.7 9.0 2.7 0.022 0.036 0.068 0.024 0.120 1.0 0.024 4-pin SMT 8-pin SMT 8-pin SMT 8-pin SMT 8-pin SMT 8-pin SMT 8-pin TH 8-pin TH 8-pin TH 8-pin TH 8-pin TH 100 mil 100 mil 100 mil 100 mil 100 mil 100 mil 100 mil 100 mil 100 mil 100 mil HT83-00007 HT83-00787 HT83-05088 HT83-99626 HS00-00230 HS00-98274 HS00-002294 HS00-990724 HS00-990804 HT83-996544 HT83-996554 Notes: 3 LF 3 3 3 3 3 3 3 3 (1) (2) (3) (4) Packaging (mm) Length Width 10.60 12.10 11.70 10.76 12.10 12.00 10.16 15.11 12.70 15.20 10.16 9.60 15.30 12.75 13.30 15.30 12.70 10.16 12.20 10.00 15.20 10.16 Height Hi-Pot (Vrms) 6.35 8.64 7.10 7.80 8.64 6.70 7.62 7.62 6.78 10.16 6.35 500 1500 1500 1500 500 1500 500 1500 500 1500 500 For Tape & Reel Packaging, add a “TR” suffix to the end of the Part Number when ordering Add a “LF” suffix to the Part Number for RoHS compliant parts Contact BI Technologies for RoHS compliant part availability. Tube Packaging only. Electrical / Environmental Digital Audio Products Sr RCoompH liant fo ls ode ‘LF’ M • • • • • Meets the required 2000 Vrms line isolation Standard Operating Temperature Range 0°C to +70°C Extended Operating Temperature Range -40°C to +85°C RoHS Peak Solder Rating 260°C Non-RoHS Peak Solder Rating 235°C Specifications BI P/N1 HM00-977332 HS00-99049 Notes: RoHS1 Turns Ratio Primary Inductance (mH ±20%) Style Pitch LF LF 1:1 1:1 2.50 2.50 4-pin TH 8-pin SMD 200 mil 100 mil Packaging (mm) Length Width 12.7 12.7 8.89 12.7 Height Hi-Pot (Vrms) 6.35 6.7 2000 2000 (1) Add a “LF” suffix to the Part Number for RoHS compliant parts. (2) Tube Packaging only. 2006 EDITION MAGNETIC COMPONENTS SELECTOR GUIDE www.bitechnologies.com We reserve the right to change specifications without prior notice 95