SX-4413 5° LH3 Steering Torque Sensor The LH3 torque sensor is ideally suited for demanding Electric Power Steering systems. ELECTRICAL1 Torque Signal Linearity ±3% Torque Hysteresis 0.5% Torque Signal Microgradient ±30% of theoretical slope over 0.4° interval Torque Signal Sensing Angle ±5° Total Resistance 800 Ω ±30% MECHANICAL Torque Mechanical Travel ±11.4° Turning Torque (rotor to rotor) 0.03 NM Max. Turning Torque (rotor to housing) 0.06 NM Max. Weight 95 grams maximum ENVIRONMENTAL Operating Temperature Range -40°C to +85°C Shock 14 ms half-sine at 300 m/s2 Vibration 10 to 55 Hz with 1 mm P-P constant displacement, 120 hours each of 3 planes Torque Rotational Life 1 million cycles Storage Temperature Range 1 -40°C to +105°C RoHS 2 Pb compliant Specifications subject to change without notice. BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 January 28 2015 Website: www.bitechnologies.com SX-4413 page 1 of 4 SX-4413 OUTPUT CHART Typical Torque Outputs 100% 90% 80% Outputs (% of Vt) 70% 60% 50% T1 T2 40% 30% 20% 10% CW direction -> 0% -6 -4 -2 0 2 Relative angle (degrees) BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 January 28 2015 Website: www.bitechnologies.com SX-4413 page 2 of 4 4 6 SX-4413 OUTLINE DRAWING Tolerances ±0.25 mm unless otherwise specified. See drawing # 122-4413-80 for details. BARCODE LABEL PINOUTS Code 128 symbology 4413 A Y DDD T SSSS Model # BI revision letter BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 January 28 2015 Website: www.bitechnologies.com SX-4413 page 3 of 4 Last digit of year Tester # Day of year Sequential serial # SX-4413 RECOMMENDED INTERFACE BI Technologies Corporation 4200 Bonita Place, Fullerton, CA 92835 USA Phone: 714 447 2345 January 28 2015 Website: www.bitechnologies.com SX-4413 page 4 of 4