IPC-623 4U 20-slot Fault Resilient IPC Chassis Features • Supports up to 20-slot ISA/PICMG backplanes • Front-access, 300W/ 400W hot-swap redundant power supply • Removable disk drive bay mounted with up to three half-height drivers and one 3.5" FDD, plus one internal 3.5" HDD • Three hot-swappable 86 CFM cooling fans • Hold-down clamp protects plug-in cards from vibration • Baby-AT, Mini-ATX, ATX motherboard version are available • Fault detection with audible and visual alarms for power supply and fan failure or overheating. Introduction Power Supply Specifications The IPC-623 is a 4U height rackmount IPC chassis which can hold a 20-slot ISA/PCI backplane and 300 W / 400W redundant power supply. In addition, the IPC-623 also features advanced fault resilient capability. An audible alarm is activated for power failure and fan failure or overheating which makes it an ideal solution for both computer telephony applications and industrial automation systems. Specifications • Construction: Heavy-duty steel • Disk drive capacity: With redundant power supply, can supports three half-height and one 3.5 front accessible disk drives and one 3.5 internal HDD. With single power supply, can supports up to six half-height and two 3.5 front accessible disk drives and two 3.5 internal HDDs. • Cooling system: Three hot-swap 86 CFM fans • Controls: System reset, power On/Off, alarm reset on the front panel behind door • Status indicators: Bi-color LEDs (green/red) for power failure, fan failure and overheating. Single-color LEDs (green) for HDD activity, +5 V, +12 V, -5 V, -12 V power source. • Keyboard connector: Pre-wired 5-pin DIN connector front-accessible • Speaker: One 8 W compact size speaker • Dimension (W x H x D): 482 x 177 x 660 mm (19" x 7" x 26") • Weight: 26 kg (57 lb) • Paint color: Black 2U 2X, Fabric Texture (Pantone 414U also available) • Fault detection and alarm notification: Monitoring of system hardware including fan failure, power failure and overheating. Audible alarm included. • Operating temperature: 0 ~ 45 C (32 ~ 113 F) • Relative humidity: 10 ~ 95%, @ 40 C, non-condensing • CE compliant, UL, C-UL approved Specifications Model Name RPS-300V (AT Redundant) RPS-400-ATX (ATX redundant) Watt Input Output Mini-load MTBF 300W 110/220 V AC +5V @30A +12 V @ 12A -5V @ 0.5A -12V @ 0.5A +5V @ 2 A +12 V @ 1 A 100,000 hours 100/220 V AC +5V @42A +3.3V @20A +5 V& 3.3 V total 230W +12 V @ 14A -5V @ 1A -12V @ 1A +5 V SB @ 0.75A +5V @ 2 A +3.3 V @ 0.3 A +12 V @ 0.5 A 100,000 hours 400W UL/CSA/T郹 /CE approved The IPC-623 features a front-accessible hot-swap redundant 300 W / 400 W power supply with on/off key lock for easy maintenance and replacement. IPC/CTI Chassis and RAID Subsystems IPC-623 Dimensions IPC/CTI Chassis and Unit: mm (inch) 3 Ordering Information For flexible system integration, Advantech provides the following intregration options for your specific needs. Please note that barebone models are equipped with power supplies but without backplanes. You may choose the required backplane from the backplane options, and integrate it into the chassis on your own. Backplane-intergrated Chassis Ordering P/N With Power Supply With Backplane IPC-623P4-300R RPS-300V PCA-6120P4 IPC-623P7-300R RPS-300V PCA-6119P7 Barebone Chassis Passive Backplane Options Slots per Segment (ISA/PCI/CPU) Segment 20 ISA Single PCA-6120P4 15 / 4 / 1 Single PCA-6119P7 11 / 7 / 1 Single PCA-6119P10 8 / 10 / 1 Single PCA-6119P17 1 / 17 / 1 Single B/P Model Name PCA-6120 (with power supply but no backplane) Ordering P/N With Power Supply IPC-623BP-300R RPS-300V IPC-623BP-400R RPS-400-ATX IPC/CTI Chassis and RAID Subsystems www.advantech.com