C230S/C330S CotoMOS® C230S/C330S When small size and high performance are needed, the SOP package, such as the C230S or C330S, is the industry choice. Both the C230S and the C330S feature high load voltage capability and the opportunity for efficient board layout, saving precious board space without compromising on performance. In addition, the C330S offers two fully-independent form A channels for further space savings. Both relays are ideally suited to the needs of Test and Measurement, Industrial, and Telecommunications. C230S/C330S Features u Contact Form: C230S: 1A / C330S: 2A u Load Voltage: 400V Maximum u Operation LED Current: 3.0mA Maximum u Load Current: C230S: 100mA Maximum / C330S: 85mA Maximum u On-Resistance: 24Ω Typical u Output Capacitance: 115pF Typical u Low Off-State Leakage Current: 1.0μA Maximum DIMENSIONS in Inches (Millimeters) C230S C330S 0.181(4.6) Max. 0.382(9.7) Max. 0.016(0.4) 0.200(0.5) 0.280(7.1)Max. 0.200(0.5) 0.173(4.4) 0.006(0.15) 1 2 (+) (-) 3,4: Drain (MOSFET) IDENTIFIES PIN #1 0.006(0.15) 0.100(2.55)Max. 0.300(7.62) TERMINAL IDENTIFICATION 4 3 1: Anode (LED) 2: Cathode (LED) 0.100(2.54) 0.006(0.15) 0.079(2.0) 0.006(0.15) 0.079(2.0) 0.100(2.54) IDENTIFIES PIN #1 0.100(2.55)Max. 0.173(4.4) 0.280(7.1)Max. 0.016(0.4) TERMINAL IDENTIFICATION 8 7 6 5 1 2 3 4 (+) (-) (+) (-) 1,3: Anode (LED) 2,4: Cathode (LED) 5,6,7,8: Drain (MOSFET) tel: (401) 943.2686 | fax: (401) 942.0920 C230S/C330S MAXIMUM RATINGS (Ambient Temperature: 25ºC) Parameters INPUT SPECIFICATIONS Symbol Units Value Continuous LED Current IF mA 50 Peak LED Current IFP mA 500 LED Reverse Voltage VR V 5 Input Power Dissipation Pin mW 75 VL V (AC peak or DC) 400 OUTPUT SPECIFICATIONS Load Voltage IL mA 100 (1Ch) / 85 (2Ch) Peak Load Current IPeak A 0.6 Output Power Dissipation POut mW 300 (1Ch) / 450 (2Ch) PT mW 350 (1Ch) / 500 (2Ch) I/O Breakdown Voltage VI/O Vrms 1500 Operating Temperature TOpr ºC -40 ~ +85 Storage Temperature TStg ºC -40 ~ +100 Load Current RELAY SPECIFICATIONS Total Power Dissipation C230S/C330S ELECTRICAL SPECIFICATIONS (Ambient Temperature: 25ºC) Parameters INPUT LED Forward Voltage Symbol Test Conditions Units Min VF IF=10mA V 1.0 Operation LED Current IF On mA Recovery LED Voltage VF Off V Typ Max 1.5 0.9 3.0 24 30 0.5 OUTPUT On-Resistance Drain to Drain ROn IF=5mA, IL=Rating Time to flow is within 1 sec. Ω Off-State Leakage Current ILeak VL=400V μA Output Capacitance COut VL=0V, f=1MHz pF 115 ms 0.25 0.5 ms 0.02 0.2 1.0 TRANSMISSION Turn-On Time TOn Turn-Off Time TOff IF=5mA, IL=Rating COUPLED I/O Insulation Resistance RI/O I/O Capacitance CI/O Ω f=1MHz pF Environmental Ratings: Operating Temp: -40°C to +85° C; Storage Temp: –40 to +100 C. All electrical parameters measured at 25° C unless otherwise specified. For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. 109 1.3