DATA SHEET Part Number: SL15 50003 Ordering Different Lead Types: Inside Kinked Leads Outside Kinked Leads Use -A after Ametherm’s part # Use -B after Ametherm’s part # For example: to order an inside kinked lead use part number SL15 50003 -A D D D T C B L S S S STRAIGHT LEADS OUTSIDE KINKED LEADS INSIDE KINKED LEADS Electrical Specifications: Mechanical Specifications: Resistance @ 25°C Max Steady State Current Up to 65°C Max Recommended Energy Rating (Joules) Actual Failure Point of Instantaneous Energy (Joules) Resistance @ 100% of Max Current Resistance @ 50% of Max Current Body Temperature @ 100% Current Rating Dissipation Constant Thermal Time Constant Material Type Max Recommended Capacitance @ 120VAC/ 265VAC ON Resistance @ 1.50 Amp 50.0 Ω ±25% 3.0 A 45.0 J 100.0 J 0.33 Ω 0.70 Ω 15mW/°C 45 seconds 174 °C “I” 3000µF/750µF 0.750 Ω CSA File Number: #CA118061 D T Lead Diameter S L Straight Leads Coating Run Down B C Coating Run Down on the Straight Leads 15.0 ± 0.5 mm 5.0 ± 0.2 mm 0.8 ± 0.1 mm 7.80 ±. 30 mm 38.0 ± 1.50 mm Standard 7.50 ± 0.70 mm 3.60 ± 0.40 mm 5.00 ± 0.5 mm Revision Date: July 8, 2003 Ametherm, Inc. 3111 N. Deer Run Road #4 Carson City, NV 89701 Telephone: (800) 808-2434 (775) 884-2434 Fax: (775) 884-0670 www.ametherm.com