Suntan ® 1N4001 THRU 1N4007 GENERAL PURPOSE SILICON RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere FEATURES ●The DO-41 plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ●Construction utilizes void-free molded plastic technique ●Low reverse leakage ●High forward surge current capability ●High temperature soldering guaranteed: 250℃/10 seconds,0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-41 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.26 grams Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. SYMBOLS 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current 0.375”(9.5mm) lead length at TA=75℃ Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current TA=25℃ at rated DC blocking voltage TA=100℃ Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 Operating junction and storage temperature range UNITS VOLTS VOLTS VOLTS I(AV) 1.0 Amp IFSM 30.0 Amps VF Volts CJ RqJA 1.1 5.0 50.0 15.0 50.0 pF ℃/W TJ,TSTG -65 to +175 ℃ IR uA Note:1.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 2.Thermal resistance from junction to ambient at 0.375” (9.5mm)lead length, P.C.B. mounted Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246 Suntan RATINGS AND CHARACTERISTIC CURVES 1N4001 THRU 1N4007 FIG. 1- FORWARD CURRENT DERATING CURVE FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENTFORWARD AMBIENT TEMPERATURE, ℃ FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS NUMBER OF CYCLES AT 60 Hz FIG. 4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD VOLEAGE,VOLTS FIG. 5-TYPICAL JUNCTION CAPACITANCE PERCENT OF PEAK REVERSE VOLTAGE,% FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE t,PULSE DURATION,sec. REVERSE VOLTAGE,VOLTS Note: Specification are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246 ®