MONITOR SPEC FILTERS LOW COST A new range of low cost luminance and chrominance anti-aliasing and reconstruction filters. The filters are designed for use in 4:2:2 a-d and d-a conversion i.e. sampling rates of 13.5 MHz (Y channel) and 6.75 MHz (U and V channels). Pre-filters have a flat passband and the post-filters are shaped to provide sinx/x correction. These filters provide similar performance to the Faraday TFT range but at much reduced cost. LUMINANCE CHROMINANCE Type Number FL1035 FL1038 FL1036 FL1039 Filter Shape Lowpass Lowpass Lowpass Lowpass Passband Shape Flat Sinx/x Flat Sinx/x Sampling Frequency -- 13.5 MHz -- 6.75 MHz Insertion Loss at 100 kHz < 1.6 dB < 5.1 dB < 1.2 dB < 5.1 dB End Of Passband 5.5 MHz 5.5 MHz 2.3 MHz 2.3 MHz Passband Amplitude Ripple 0.3 dB max 0.3 dB max 0.3 dB max 0.2 dB max Start Of Stopband 8.2 MHz 8.2 MHz 4.1 MHz 4.1 MHz Stopband Attenuation 40 dB 40 dB 40 dB 39.5 dB Group Delay Ripple < 21 ns < 23 ns < 42 ns < 48 ns Group Delay Bandwidth 5.0 MHz 5.0 MHz 2.3 MHz 2.3 MHz Delay Time at 200 kHz 220 ns + 5 ns 217 ns + 5 ns 450 ns + 5 ns 450 ns + 5 ns Impedance 75 ohms 75 ohms 75 ohms 75 ohms Temperature Range 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C Aqueous Washable Yes Yes Yes Yes Package Type DR00008B DR00008B DR00005A DR00008B © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice FARA005d Page 1 of 2 Dec-99(B) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. FARA005d Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Dec-99(B)