FVSA SERIES GENERAL PURPOSE VIDEO FILTER STEEPNESS FACTOR 1.38 Part Number FVSA01P75** FVSA02P25** FVSA02P75** FVSA03P20** FVSA03P50** FVSA03P80** FVSA04P00** FVSA04P50** FVSA05P20** FVSA06P00** FVSA06P50** FVSA07P10** FVSA09P50** FVSA10P50** FVSA11P50** FVSA12P40** End of Passband Ripple (MHz) Nominal -3dB Frequency1 (MHz) Nominal -12dB Frequency1 (MHz) -45dB Stopband Frequency1 (MHz) 1.75 2.25 2.75 3.20 3.50 3.80 4.00 4.50 5.20 6.00 6.50 7.10 9.50 10.50 11.50 12.40 1.96 2.52 3.08 3.58 3.92 4.26 4.48 5.04 5.82 6.72 7.28 7.95 10.64 11.76 12.88 13.89 2.10 2.70 3.30 3.84 4.20 4.56 4.80 5.40 6.24 7.20 7.80 8.52 11.40 12.60 13.80 14.88 2.42 3.11 3.80 4.42 4.83 5.24 5.52 6.21 7.18 8.28 8.97 9.80 13.11 14.49 15.87 17.11 Maximum Peak-to-peak Delay Distortion ns to MHz 42 38 32 28 25 23 22 20 17 15 14 13 9 8 7 7 1.75 2.25 2.75 3.20 3.50 3.80 4.00 4.50 5.20 6.00 6.50 7.10 9.50 10.50 11.50 12.40 Approximate Propagation Delay nanoseconds 1620 1260 1030 885 810 745 710 630 545 470 435 400 300 270 245 230 1 wrt loss at 100 kHz Any other cutoff frequency can be supplied to your requirements. Additional data Impedance Insertion loss Stopband attenuation wrt 100 kHz Amplitude ripple in passband Aqueous Washable 75 ohms < 1.0 dB > 45dB < 0.2 dB YES © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice Fara186s Page 1 of 2 Feb-00(A) PACKAGE DETAIL All dimensions in millimetres (inches). Gen Tolerance ± 0,05 (0.002) unless otherwise stated. DO NOT SCALE © Faraday Technology Ltd Croft Road Newcastle-U-Lyme ST5 0QZ England Tel (044) 01782 661501 Fax 630101 2,54 (0.1) Typ. Third Angle Projection All dimensions in millimetres (inches). Gen Tolerance ± 0,05 (0.002) unless otherwise stated. Notes; TOP VIEW DO NOT SCALE © Faraday Technology Ltd Croft Road Newcastle-U-Lyme ST5 0QZ England Tel (044) 01782 661501 Fax 630101 11,5 (0.452) Max. Total height 52,25 (2.057) Max. Third Angle Projection 48,26 (1.9) 1,9 (0.07) Nom. Pins Matl; Phosphor Bronze hot tin dipped 60/40 Pins Size; 0,51 (0.02) x 0,25 (0.01) 2,54 (0.1) Matrix Pin Assignments; Pins 1 & 2 = Input 43 (1.69) Max. Pins 15 & 16 = Output Pins 3, 4, 13 & 14 = Gnd. Pin 20 2,5 (0.1) Nom. Pin 16 TOP VIEW Pin 1 3,81 (0.15) Min. Pin 1 Pin 21 Pin 40 20,32 (0.8) Max. 13,6 (0.54) Max. 15,24 (0.6) Pins 5 to 12 incl = Not connected. Notes; Pins Matl; Phosphor Bronze Hot Tin dipped. 2,45 (0.09) Nom. Pins Size; 0,51 (0.02) x 0,25 (0.01) Pin Assignments; 7,0 (0.27) Nom. 8,0 (0.31) Max. Template: DT00074 Change Note No; Auth: M Pass Date: 1/10/97 Date: 1/10/97 How to Order: Title: General; Pins 1 & 2 = Input. Pins 15 & 16 = Output. 3,81 (0.15) Min 38,1 (1.5) Passive; Pins 3, 4, 13 & 14 = Gnd. All remaining pins not Connected. Template: DT00264 Template: Change Note No; Drg No: FILTER ASSY OUTLINE FVSA DR00074A 06P18 Drawn: B A Knapper Date: V S 25/01/00 Auth: N White Date: 25/01/00 Title: Drg No: FILTER ASSY DR00269A 1432 Cut off frequency Case Style V (DR00074A) H (DR000269A) Sampling frequency (Sinx/x only) Passband Shape F S Example: FVSA06P25VF Indicates a 6.25MHz passband with flat response in a single-in-line format FVSA06P18HS1432 Indicates a 6.18MHz passband with sinx/x correction for a 14.32 MHz sampling frequency in a dualin-line format Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. Fara186s Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Feb-00(A)