RN 14 Series Insulation Coated Metal Film Resistors HOW TO ORDER: RN14 S 2E Custom solutions are available. 100K B M Packaging M = Tape ammo pack (1,000 pcs) B = Bulk (100 pcs) Resistance Tolerance B = + 0.1% C = +0.25% D = +0.5% F = +1.0% Resistance Value e.g. 100K, 62R2, 30K1 FEATURES Voltage Ultra Stability of Resistance Value 2B = 1/8W, 2E = 1/4W, 2H = 1/2W Extremely Low temperature coefficient of Temperature Coefficient R = +5ppm E = +25ppm S = +10ppm C = +50ppm Working Temperature of -55°C ~ +150°C resistance, +5ppm Applicable Specifications: EIA575, JISC5202, and IEC 60068 Series Precision Insulation Coated Metal Film Fixed Resistor ISO 9002 Quality Certified STANDARD ELECTRICAL SPECIFICATION Type Rated Watts* Max. Working Voltage Max. Overload Voltage RN14 2B 0.125 250 500 RN14 2E 0.25 350 700 0.50 500 1000 RN14 2H TCR ppm/°C +5, +10, +25 +25, +50 +5, +10, +25 +25, +50 +5, +10, +25 +25, +50 Tolerance (%) +0.1 +0.25, +0.5, +1 +0.1 +0.25, +0.5, +1 +0.1 +0.25, +0.5, +1 Resistance Range Operating Temp Range 10 Ω – 1MΩ 10 Ω – 1MΩ - 55C to + 150C 10 Ω – 1MΩ * per element @ 85 C DIMENSIONS (mm) L 6.3 + 0.5 9.0 + 0.5 14.2 + 0.8 D 2.3 + 0.2 3.6 + 0.5 4.8 + 0.4 C 7.5 10.5 16.0 l 27 + 2 27 + 2 27 + 2 d 0.6 + 0.05 0.6 + 0.05 1.0 + 0.05 Electric Type RN14 2B RN14 2E RN14 2H PERFORMANCE Mechanic RESISTOR DRAWING Other DERATING CURVE Test Item JISC5202 Test Result Value 5.1 B (+0.1%) TRC 5.2 S (+10ppm/C) Short Time Overload 5.5 + (0.25% + 0.05Ω) Insulation 5.6 10,000M Ω Voltage 5.7 + (0.1% + 0.05Ω) Intermittent Overload 5.8 + (0.5% + 0.05Ω) Terminal Strength 6.1 + (0.25% + 0.05Ω) Vibration 6.3 + (0.25% + 0.05Ω) Solder Heat 6.4 + (0.25% + 0.05Ω) Solderability 6.5 95% Solvency 6.9 Anti-Solvent Temperature Cycle 7.4 + (0.25% + 0.05Ω) Low Temp Operation 7.1 + (0.25% + 0.05Ω) Humidity Overload 7.9 + (0.25% + 0.05Ω) Rated Load Test 7.10 + (0.25% + 0.05Ω) MATERIAL SPECIFICATION Element: Encapsulation: Core: The content of this specification may change without notification 1/01/2006 American Accurate Components, Inc. Termination: Precision deposited nickel chrome alloy Coated constructions Specially formulated epoxy compounds Standard lead material is solder coated copper with controlled annealing Fire cleaned high purity ceramic Solderable and weldable per MIL-STD1276, Type C 188 Technology Drive, Unit H, CA 92618 TEL: 949-453-9888 FAX: 949-453-8889 Email: [email protected] 1