LUB1000 Series LED Display Back light Module for LCDs LUB1000 Series LED Backlight Modules LED backlight modules are combination modules of custom lightsource and light guide that luminous intensity distribution is adjusted. This module is perfect for Liquid Crystal Display(LCD) because slim and light of uniform illumination over the entire surface of the module can achieved with optional size. Quick Reference Slim profile, (0.6-2.0mm thick light guide), and uniform light intensity. Low power consumption for long battery life. The backlight is designed to meet the size requirements of the LCD. Single color (White, Blue, Yellow, Amber) and also dual color is available. Features The diffusion layer in the light guide reflects the light from the LEDs on the sides up.The diffusion layer is designed to give uniform illumination over the entire surface of the module. Custom light-source (Customized) Light guide Custom light-source Reflective sheet Diffusion layer L i g h tg u i d e Reflective sheet 1/2 LUB1000 Series LED Display External Dimensions The module available for the dimensional size range shown below. (Unit:mm) (1) One-side light source type 1 60Max. 3Min. (Viewing area) 13Min. (Viewing area) 1 0.8 ~ 2.0 1 Custom light-source (2) Two-side light source type 3Min. 120Max. 3Min. (Viewing area) 13Min. (Viewing area) 1 0.8 ~ 2.0 1 Custom light-source 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0