Ultra Low Jitter Product Line Summary VCXO Products Series SMD Footprint Dimensions Stability Range Frequency Range Output Options Voltage Options Phase Jitter (12k - 20MHz) Temperature Range Data Sheet Link Data Sheet Link Jitter generated from clock sources is becoming an increasingly important issues for designers of high bandwidth communication networks. As Ethernet and Optical network technologies increase in speed and bandwidth to 40/100/400G, ultra low jitter clock generation is required. Ultra-low jitter clocks offer significant improvement in signal-to-noise ratio which improves overall system performance. Connor Winfield has designed a number of ultra low jitter clock and VCXO offerings based on its crystal expertise in high frequency fundamental crystal technology and overtone crystal technology that support these critical requirements. Follow the links below for information on specifications and stock availability. VT8 Series 5x7mm ±25ppm 50MHz to 160MHz CMOS 3.3V <100fs -40°C to 85°C VT Series VB762 5x7mm No stability specified, APR 70MHz to 170 MHz LVPECL 3.3V 100fs typical at 155.52MHz -40°C to 85°C VB762 V788 5x7mm No stability specified, APR 200MHz to 800MHz LVPECL 3.3V <100fs -40°C to 85°C V788 PB Series 5x7mm ±50ppm 70MHz to 170MHz LVPECL 3.3V <100fs -40°C to 85°C BP Series 721x Series 5x3.2mm ±25ppm 10MHz to 100MHz CMOS 2.5V or 3.3V <300fs -40°C to 85°C 72x3 Series 72x5 Series CW3 Series 3.2 x 2.5mm ±25ppm 10MHz to 100MHz CMOS 2.5V or 3.3V <300fs -40°C to 85°C CW3 Series V7xx3, V7xx5 5x3.2mm ±50ppm 10MHz to 52MHz LVCMOS/HCMOS 3.3V or 5.0V <1ps RMS 12kHz to Fo/2 -40°C to 85°C V7xx3 V7xx5 Ultra Low Jitter Product Line Summary XO Products Series SMD Footprint Dimensions Stability Range Frequency Range Output Options Voltage Options Phase Jitter (12k - 20MHz) Temperature Range Data Sheet Link Data Sheet Link The Connor-Winfield Corporation | 2111 Comprehensive Drive | Aurora, IL 60505 | 630.851.4722