.156" HEADER & HOUSING sets .156" [3.96] CENTERLINE LHB, LHC, LHD & MTB SERIES Introduction: Adam Tech .156" Headers and Housings are two matched sets of Crimp Wire Housings and PCB mounted Latching Headers available in Straight and Right Angle orientation. This system is available with a front locking header, a rear locking header or without a locking feature. Each of the locking types are polarized to fit in only one direction with the housing. This system provides a sturdy, high current, high reliability connection with or without the polarized locking option. Features: Matched Latching Housing & Header system Straight, Right Angle mounting Headers Choice of Two Latching Types Housings feature High pressure, Low insertion force contacts Mating Connectors: Adam Tech MTB series and all industry standard latching type .156 [3.96mm] centers POWER HEADER 12 LHB S A 1 POSITIONS SERIES INDICATOR 2 thru 20 LHB = Power PIN TYPE Header S = Square Post Specifications: Material: Insulator: Nylon 66, rated UL94V-2 Insulator Color: Natural Contacts: Phosphor bronze and Brass Contact Plating: Tin over copper underplate overall PIN ANGLE A = Straight B = Right Angle Electrical: Operation voltage: 250V AC max. Current rating: 5 Amp max. Insulation resistance: 1000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute POWER HEADER LHC Mechanical: Recommended wire size: 18 to 24 Awg Environmental: Operating temperature: -25°C to +85°C TS 10 SERIES INDICATOR LHC = Locking Header LHD = Short Back Locking Header Packaging: Anti-static plastic bags FRICTION LOCK / POLARIZER OPTION 1 = With Lock Polarizer 2 = Without Lock Polarizer POSITIONS 2 thru 20 PIN ANGLE TS=Straight TRA= Right Angle TRB= Reverse Right Angle HOUSING Approvals and Certifications: UL Recognized & CSA Certified, File no. E224053 MTB SERIES INDICATOR MTB = Wire housing MTC = Latching Housing 12 POSITIONS 2 thru 20 CRIMP CONTACT MTB-C SERIES INDICATOR MTB-C = Crimp contact MTC-C = Crimp contact www.adam-tech.com R PACKAGING B =1000 pieces loose cut R =6000 pieces on reel 267 .156" HEADER & HOUSING sets .156" [3.96] CENTERLINE LHB & MTB SERIES LHB LHB Straight without back Right Angle without back .250 [6.35] .250 [6.35] B A LHB-08-SA2 .156 [3.96] .156 [3.96] .500 [12.70] .144 [3.65] .144 [3.65] .126 [3.20] .045 SQ. [1.14] LHB LHB Straight with back right angle with back .402 [10.20] .402 [10.20] B A .441 [11.20] .220 [5.58] .126 [3.20] .045 SQ. [1.14] LHB-08-SB2 B A B A LHB-09-SA1 .156 [3.96] .500 [12.70] .130 [3.30] .045 SQ. [1.14] .156 [3.96] .500 [12.70] LHB-09-SB1 .500 [12.70] .045 SQ. [1.14] .144 [3.65] .130 [3.30] .500 [12.70] .203 [5.17] .134 [3.40] MTB MTB Crimp Housing A Crimp Contact B .091 [2.30] A A MTB-04 .256 [6.50] B B .091 [2.30] SECTION B-B .094 [2.40] .083 [2.10] .126 [3.20] .134 [3.40] .630 [16.00] .539 [13.70] .156 [3.96] A = .156 [3.96] x No. of Spaces B = .156 [3.96] X No. of Positions Recommended PCB Layout 268 www.adam-tech.com SECTION A-A Ø.067 [Ø1.70] .156" HEADER & HOUSING sets .156" [3.96] CENTERLINE LHC & MTC SERIES LHC MTC Straight with Rear Lock Housing .331 [8.40] .287 [7.30] MTC-06 .156 [3.96] LHC-06-TS B A .185 [4.70] .240 [6.10] B A .370 [9.40] .156 [3.96] .528 [13.40] .146 [3.70] .315 [8.00] .130 [3.30] MTC-C LHC Crimp contacts Right Angle with rear lock B A MTC-C-R .142 [3.60] .146 [3.70] .161 [4.10] B A B A LHC-06-TRA SECTION A-A .185 [4.70] .240 [6.10] .370 [9.40] .083 [2.1] .161 [4.1] .118 [3.00] .146 [3.70] .156 [3.96] .130 [3.30] .315 [8.00] www.adam-tech.com .098 [2.50] SECTION B-B .039 [1.00] .156 [3.96] A = .156 [3.96] x No. of Spaces B = .156 [3.96] X No. of Spaces + .156 [3.96] .098 [2.50] ø.067 [1.70] Recommended PCB Layout 269