2.00mm BOX HEADERS .079" [2.00] CENTERLINE 2BHR SERIES Introduction: Adam Tech 2BHR Series 2.0mm Box Headers are dual row shrouded headers for use with dual row IDC female socket connectors. Our low profile, space saving design has a center slot for the socket’s polarization bump. Adam Tech’s Box Headers are available in Straight PCB Mount, Right Angle PCB Mount and SMT Mounting. Plating options include choice of Gold, Tin or Selective Gold. SMT versions are manufactured with a Hi-Temp insulator. Additional options include latches and custom pin lengths. Features: Shrouded, insulated connection Superior low profile design Slot for IDC socket Polarization bump Straight PCB, Right Angle PCB and SMT versions Gold, Tin or Selective Gold plating Options include Elevated types and integral latches Hi-Temp insulator available Mating Sockets: Adam Tech .079" [2.0mm] X .079" [2.0mm] dual row IDC sockets ORDERING INFORMATION 2BHR Specifications: Material: Standard insulator: PBT, rated UL94V-0 Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0 Insulator Color: Black Contacts: Brass Plating: U = Gold over nickel underplate SG = Gold over nickel underplate on contact area, tin over copper underplate on tails. T = Tin over copper underplate overall Electrical: Operating voltage: 250V AC max. Current rating: 1 Amp max Contact resistance: 20 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute 20 V U SERIES INDICATOR 2BHR= 2mm Box Header NO. OF POSITIONS 08, 10, 14, 16, 20, 24, 26, 30, 34, 40, 44, 50, 60, 64 A PIN LENGTH A =Standard solder tail B =Special length, customer specified SMT =Surface Mount CONTACT PLATING U=Gold Plated T =Tin Plated SG=Gold Plating in contact area, tin plated tails Mechanical: Mating durability: 500 cycles min. Temperature Rating: Operating temperature: -40°C to +105°C Soldering process temperature: Standard insulator: 235°C Hi-Temp insulator: 260°C Packaging: Anti-ESD plastic trays APPROVALS AND CERTIFICATIONS: UL Recognized & CSA Certified, File no. E224053 MOUNTING ORIENTATION V =Straight Mount H =Right Angle Mount This series is available in an elevated version similar to our BHRE Series as shown on pgs. 322-323 OPTIONS: Add designator(s) to end of part number 30 =30 µin gold plating in contact area GY = Gray color insulator HT =Hi-Temp insulator for Hi-Temp soldering processes up to 260°C (Add this option for thru-hole products only. All SMT products are manufactured with Hi-Temp insulators) 302 www.adam-tech.com 2.00mm BOX HEADERS .079" [2.00] CENTERLINE 2BHR SERIES 2BHR Straight A B .173 [4.40] .020 [0.50] SQ. 2BHR-14-VUA .216 [5.50] .157 [4.00] B .079 [2.00] .220 [5.60] .110 [2.80] .079 [2.00] ø.031 [0.80] .079 [2.00] Recommended PCB Layout .079 [2.00] A = .079 [2.00] X No. of Spaces + .362 [9.20] B = .079 [2.00] X No. of Spaces 2BHR Right Angle A B .173 [4.40] .020 [0.50] SQ. .216 [5.50] .157 [4.00] 2BHR-14-HUA B .039 [1.00] .220 [5.60] .079 [2.00] .079 [2.00] .079 [2.00] .079 [2.00] ø.031 [0.80] .114 [2.90] Recommended PCB Layout A = .079 [2.00] X No. of Spaces + .362 [9.20] B = .079 [2.00] X No. of Spaces 2BHR SMT A B .173 [4.40] 2BHR-14-VUA-SMT .020 [0.50] SQ. .157 [4.00] B .216 [5.50] .079 [2.00] .059 [1.50] .220 [5.60] .238 [6.05] .079 [2.00] .256 [6.50] .295 [7.50] .039 [1.00] Recommended PCB Layout A = .079 [2.00] X No. of Spaces + .362 [9.20] B = .079 [2.00] X No. of Spaces www.adam-tech.com 303 2.00mm latch HEADER .079" [2.00] CENTERLINE 2MHR SERIES Introduction: Adam Tech 2MHR Series 2mm Latch Headers are dual row, PCB mounted, shrouded headers with latches for use with dual row IDC female socket connectors. In addition to providing a shock and vibration proof connection the locking latches also act as ejectors to remove the mating socket. Our low profile, space saving design has a center slot for the socket’s polarization bump. Adam Tech’s Latch Headers are available in Straight PCB Mount, Right Angle PCB and SMT Mounting. Plating options include choice of Gold, Tin or Selective Gold Features: Integral Latches provide Shock and Vibration Proof connection Slot for IDC socket Polarization bump Straight PCB, Right Angle PCB and SMT versions Gold, Tin or Selective Gold plating Elevated option available Hi-Temp insulator available Mating Sockets: 2mm X 2mm Dual row IDC sockets Specifications: Material: Insulator: PBT, glass reinforeced, rated UL94V-0 Insulator Color: Black (Gray optional) Contacts: Brass ORDERING INFORMATION Plating: U = Gold over nickel underplate overall SG = Gold over nickel on contact area, Tin over copper underplate on tails. T = Tin over copper underplate overall 2MHR Electrical: Operating voltage: 250V AC max. Current rating: 1 Amp max Contact resistance: 20 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute Mechanical: Mating durability: 500 Cycles min. 44 V SERIES INDICATOR 2MHR = 2mm Shrouded Header w/Latches POSITIONS 10, 12, 14, 16, 20, 22, 24, 26, 30, 32, 34, 40, 44, 48, 50, 60, 64, 68 Temperature Rating: Operating temperature: -40°C to +105°C U A L LATCHING FEATURES S =Short latches (for sockets w/o strain relief) L =Long latches (for sockets w/strain relief) N=No latches PIN LENGTHS A=Standard length Packaging: Anti-ESD plastic trays Safety Agency Approvals: UL Recognized & CSA Certified, File no. E224053 MOUNTING ANGLE V =Straight Mount H=Right Angle Mount This series is availabe in an elevated version similar to our BHRE Series as shown on pgs. 322-323 solder tail B=Special length, customer specified CONTACT PLATING U=Gold plated SG=Gold plating in contact area, Tin plated solder tails T =Tin plated OPTIONS: Add designator(s) to end of part number HT = High-temp insulator for high-temp soldering processes 304 www.adam-tech.com 2.00mm latch HEADER .079" [2.00] CENTERLINE 2MHR SERIES 2MHR .079 [2.00] STRAIGHT PCB MOUNT .236 [6.00] .160[4.06] Y X [.394 [10.00] .118 [3.00] .079 [2.00] .079 [2.00] B A B .079 [2.00] LATCH DIMENSIONS X 2MHR-34-VUAS Ø.031 [0.80] Y LONG LATCH .775 [19.70] .452 [11.50] SHORT LATCH .665 [16.90] .342 [8.70] A = .079 [2.00] X No. of Spaces + .697 [17.70] B = .079 [2.00] X No. of Spaces Recommended PCB Layout B .079 [2.00] .079 [2.00] 2MHR Right angle PCB MOUNT .079 [2.00] .236 [6.00] .160 [4.06] Y X [.394 [10.00] .079 [2.00] 2MHR-60-HUAS .118 [3.00] A B .079 [2.00] .079 [2.00] LATCH DIMENSIONS X Y LONG LATCH .775 [19.70] .452 [11.50] SHORT LATCH .665 [16.90] .342 [8.70] A = .079 [2.00] X No. of Spaces + .697 [17.70] B = .079 [2.00] X No. of Spaces Ø.031 [0.80] Recommended PCB Layout .079 [2.00] 2MHR .079 [2.00] VERTICAL SMT MOUNT .236 [6.00] .160[4.06] Y X [.394 [10.00] 2MHR-40-HUAS B A LATCH DIMENSIONS X B .079 .047 [2.00] [1.20] .299 [7.60] .157 [4.00] Y LONG LATCH .775 [19.70] .452 [11.50] SHORT LATCH .665 [16.90] .342 [8.70] A = .079 [2.00] X No. of Spaces + .697 [17.70] B = .079 [2.00] X No. of Spaces www.adam-tech.com .394 [10.00] Recommended PCB Layout 305 .100" IDC Box Header .100" x .100" [2.54 x 2.54] CENTERLINE FCP SERIES Introduction: Adam Tech FCP Series IDC Box Headers are designed to quickly and easily mass terminate to .050" flat cable. The IDC termination is converted to a Shrouded Box Header output with a polarizing slot that mates with standard IDC sockets. This connector is ideal for splicing and making “T” taps to a cable bus. Adam Tech’s sturdy design features solid, selectively gold plated .025"sq. copper alloy posts. Features: IDC Flat Cable to Shrouded Box Header Mates with standard IDC sockets Ideal for splicing and “T” taps to cable bus Solid selectively gold plated contacts Mating Connectors: Mates with Adam Tech FCS Series .100" [2.54mm] dual row IDC sockets Specifications: Material: Insulator: PBT, rated UL94V-0 Insulator Color: Gray Contacts: Brass Contact Plating: Gold flash (30 µin optional) over nickel underplate on contact area, tin over copper underplate on IDC area Electrical: Operating voltage: 250V AC max. Current rating: 1 Amp max Contact resistance: 30 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute ORDERING INFORMATION FCP 34 SERIES INDICATOR FCP = IDC Box Header Mechanical: Insertion force: 0.5 lbs per circuit max. Withdrawal force: 0.094 lbs per circuit min Mating durability: 500 cycles min. Recommended cable size: 28 Awg stranded SG PLATING SG = Selective gold plating POSITIONS 10, 14, 16, 20, 24, 26, 30, 34, 40, 50, 60, 64 Temperature Rating: Operating temperature: -40°C to +105°C Packaging: Anti-ESD plastic trays Safety Agency Approvals: UL Recognized & CSA Certified, File no. E224053 OPTIONS: Add designator(s) to end of part number E= Mounting Ears 30= 30 µin gold plating in contact area BK=Black color insulator 352 www.adam-tech.com .100" IDC Box Header .100" x .100" [2.54 x 2.54] CENTERLINE FCP SERIES FCP Header .025 [.640] SQ .100 [2.54] .100 [2.54] .335 [8.50] FCP-34-SG A B C .620 [15.75] FCP Header 6 with mounting ear option .100 [2.54] .025 [.640] SQ .335 [8.50] .118 [3.00] FCP-34-SG-E A B .280 [7.11] C .620 [15.75] .242 [6.15] .281 [7.15] www.adam-tech.com POS. DIMENSIONS B .708 [18.00] C .905 [23.00] 10 A .400 [10.16] 14 .600 [15.24] .908 [23.08] 1.105 [28.08] 16 .700 [17.78] 1.008 [25.62] 1.205 [30.62] 20 .900 [22.86] 1.208 [30.70] 1.405 [35.70] 24 1.100 [27.94] 1.408 [35.78] 1.605 [40.78] 26 1.200 [30.48] 1.508 [38.32] 1.705 [43.32] 30 1.400 [35.56] 1.708 [43.40] 1.905 [48.40] 34 1.600 [40.64] 1.908 [48.48] 2.105 [53.48] 40 1.900 [48.26] 2.208 [56.10] 2.405 [61.10] 50 2.400 [60.96] 2.708 [68.80] 2.905 [73.80] 60 2.900 [73.66] 3.208 [81.50] 3.405 [86.50] 64 3.100 [78.74] 3.408 [86.58] 3.605 [91.58] 353 .100" IDC Latch HEADER .100" x .100" [2.54 x 2.54] MHF SERIES Introduction: Adam Tech MHF Series IDC Latch Headers are designed to quickly and easily mass terminate to .050" flat cable. The IDC termination is converted to a Shrouded Box Header with ejector/latches and a polarizing slot that mates with standard IDC sockets. This connector is ideal for splicing and making “T” taps to a cable bus. Adam Tech’s sturdy design features solid, selectively gold plated .025"sq. copper alloy posts. Features: Latches for secure attachment Latch ejection feature makes socket removal easy IDC Cable to Shrouded Box Header Mates with standard IDC sockets Ideal for splicing and “T” taps to cable bus Solid selectively gold plated contacts Mating Connectors: Mates with Adam Tech FCS Series .100" (2.54mm) dual row IDC sockets Specifications: Material: Insulator: PBT, rated UL94V-0 Insulator Color: Gray Contacts: Brass Contact Plating: Gold flash (30 µin optional) over nickel on contact area, Tin over copper underplate on IDC area Electrical: Operating voltage: 250V AC max. Current rating: 1 Amp max Contact resistance: 20 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute Mechanical: Insertion force: 0.5 lbs per circuit max. Withdrawal force: 0.094 lbs per circuit min Mating durability: 500 Cycles min. Recommended cable size: 28 Awg stranded ORDERING INFORMATION MHF 34 SG SERIES INDICATOR MHF= IDC Latch Header POSITIONS 10, 14, 16, 20, 24, 26, 30, 34, 40, 50, 60, 64 Temperature Rating: Operating temperature: -40°C to +105°C Packaging: Anti-ESD plastic trays Safety Agency Approvals: UL Recognized & CSA Certified, File no. E224053 OPTIONS: Add designator(s) to end of part number E = Mounting ears 354 www.adam-tech.com L EJECTOR/LATCHES S=Short ejector/ latches for sockets without strain relief L =Long ejector/ latches for sockets with strain relief PLATING SG =Selective gold plating .100" IDC Latch HEADER .100" x .100" [2.54 x 2.54] MHF SERIES MHF Header .100 [2.54] .327 [8.30] C MHF-34-SG-L X 1.185 [30.10] 1.185 [30.10] .756 [19.20] Short Latch (No Strain Relief Type) X= .236 [6.00] B Long Latch (Strain Relief Type) A X= .315 [8.00] MHF Header with Mounting Ear Option .100 [2.54] .118 [3.00] .327 [8.30] .197 [5.00] C PART NO. & POSITIONS B C MHF-10 1.266 [32.17] .860 [21.85] .400 [10.16] MHF-14 1.466 [37.25] 1.060 [26.93] .600 [15.24] MHF-16 1.566 [39.79] 1.160 [29.47] .700 [17.78] MHF-20 1.766 [44.87] 1.360 [34.55] .900 [22.86] MHF-24 1.966 [49.95] 1.560 [39.63] 1.100 [27.94] MHF-26 2.066 [52.49] 1.660 [42.17] 1.200 [30.48] MHF-30 2.266 [57.57] 1.860 [47.25] 1.400 [35.56] MHF-34 2.466 [62.65] 2.060 [52.33] 1.600 [40.64] MHF-40 2.766 [70.27] 2.360 [59.95] 1.900 [48.26] MHF-50 3.266 [82.97] 2.860 [72.65] 2.400 [60.96] B MHF-60 3.766 [95.67] 3.360 [85.34] 2.900 [73.66] A MHF-64 3.966 [100.75] 3.560 [90.43] 3.100 [78.74] X 1.185 [30.10] .299 [7.60] DIMENSIONS A www.adam-tech.com 355 .100" BOX HEADERS .100" x .100" [2.54 x 2.54] CENTERLINE BHR SERIES Introduction: Adam Tech BHR Series .100" Box Headers are a dual row shrouded header for use with dual row IDC female socket connectors. Our low profile, space saving design has a center slot for the socket’s polarization bump. Adam Tech’s Box Headers are available in Straight PCB Mount, Right Angle PCB Mount and SMT Mounting. Plating options include choice of Gold, Tin or Selective Gold. SMT versions are manufactured with a Hi-Temp insulator. Additional options include latches and custom pin lengths. Features: Superior low profile design Slot for IDC socket Polarization bump Straight PCB, Right Angle PCB and SMT versions Gold, Tin or Selective Gold plating Options include Elevated types and integral latches Hi-Temp insulator available Mating Sockets: Adam Tech .100" X .100" dual row IDC sockets ORDERING INFORMATION 50 BHR V U A Specifications: Material: Insulator: PBT, glass reinforeced, rated UL94V-0 Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0 Insulator Color: Black (Gray optional) Contacts: Brass SERIES INDICATOR BHR=.100" Box Header Plating: U = Gold over nickel underplate SG = Gold over nickel underplate on contact area, tin over copper underplate on tails. T = Tin over copper underplate overall MOUNTING ORIENTATION V =Straight Mount H =Right Angle Mount NO. OF POSITIONS 08, 10, 14, 16, 20, 24, 26, 30, 34, 40, 44, 50, 60, 64 Electrical: Operating voltage: 250V AC max. Current rating: 1 Amp max Contact resistance: 20 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute PIN LENGTH A = Standard solder tail B = Special length, customer specified SMT = Surface Mount CONTACT PLATING U = Gold Plated T = Tin Plated SG = Gold Plating in contact area, tin plated tails Mechanical: Mating durability: 500 cycles min. Temperature Rating: Operating temperature: -40°C to +105°C Packaging: Anti-ESD plastic trays Safety Agency Approvals: UL Recognized & CSA Certified, File no. E224053 OPTIONS: Add designator(s) to end of part number LL=Box header with long plastic latches SL=Box header with short plastic latches ML=Box header with long metal latches MS=Box header with long metal latches 30= 30 µin gold plating in contact area GY=Gray color insulator HT=Hi-Temp insulator for Hi-Temp soldering processes up to 260°C (Add this option for thru-hole products only. All SMT products are manufactured with Hi-Temp insulators) www.adam-tech.com 319 .100" BOX HEADERS .100" x .100" [2.54 x 2.54] CENTERLINE BHR SERIES A B C BHR Straight PCB MOUNT .025 [0.64] SQ. .346 [8.80] .177 [4.50] BHR-34-VUA .346 [8.80] .358 [9.10] C .100 [2.54] .130 [3.30] .100 [2.54] .100 [2.54] .100 [2.54] ø.040 [1.02] A = .100 [2.54] X No. of Positions /2 + .300 [7.62] B = .100 [2.54] X No. of Positions /2 + .200 [5.08] C = .100 [2.54] X No. of Spaces Recommended PCB Layout BHR A B C Right Angle PCB MOUNT .025 [0.64] SQ. .356 [9.05] .346 [8.80] .177 [4.50] .346 [8.80] .358 [9.10] BHR-34-HUA .072 [1.84] C .100 [2.54] .100 [2.54] .100 [2.54] .134 [3.40] .100 [2.54] ø.040 [1.02] A = .100 [2.54] X No. of Positions /2 + .300 [7.62] B = .100 [2.54] X No. of Positions /2 + .200 [5.08] C = .100 [2.54] X No. of Spaces Recommended PCB Layout BHR A B C Surface MOUNT .025 [0.64] SQ. .346 [8.80] .177 [4.50] BHR-30-VSG-SMT C .346 [8.80] .413 [10.50] .100 [2.54] .100 [2.54] .374 [9.50] A = .100 [2.54] X No. of Positions /2 + .300 [7.62] B = .100 [2.54] X No. of Positions /2 + .200 [5.08] C = .100 [2.54] X No. of Spaces 320 .413 [10.50] .060 [1.50] .039 [1.00] Recommended PCB Layout www.adam-tech.com .100" BOX HEADER W/Latches .100" x .100" [2.54 x 2.54] CENTERLINE BHR SERIES A BHR B C Straight Mount Box header with latches A AB BC C .429 [10.90] .354 [9.00] .354 [9.00] .354 [9.00] .429 .429 [10.90] [10.90] .197 [5.00] .197 [5.00] .405 [10.30] .405 [10.30] BHR-34-VUA-ML .197 [5.00] Y X Y X .405 [10.30] Y X .126 [3.20] .100 [2.54] .025 [0.64] SQ. .126 [3.20] .126 [3.20] .025 [0.64] SQ. .100 [2.54] .025 [0.64] SQ. A = .100 [2.54] X No. of Positions /2 + .301 [7.66] B = .100 [2.54] X No. of Positions /2 + .189 [4.80] C = .100 [2.54] X No. of Positions /2 -1 .100 [2.54] BHR right angle Mount Box header with latches A .429 [10.90] B AC BA C B C .354 [9.00] .429 [10.90] .354 [9.00] .354 [9.00] .429 [10.90] .197 [5.00] .405 [10.30] BHR-34-HUA-ML .197 [5.00] X .197 [5.00] .405 [10.30] Y .100 [2.54]Y X .405 [10.30] .025 [0.64] SQ. .100 [2.54] .025 [0.64] SQ. .100 [2.54] .025 [0.64] SQ. .100 [2.54] Y X .126 [3.20] .100 [2.54] A = .100 [2.54] X No. of Positions /2 + .301 [7.66] B = .100 [2.54] X No. of Positions /2 + .189 [4.80] .100 [2.54] C = .100 [2.54] X No. of Positions /2 -1 .126 [3.20] .126 [3.20] C .100 [2.54] .100 [2.54] ø.040 [1.02] LATCH TYPE LONG LATCH (-LL) SHORT LATCH (-SL) DIMENSIONS X Y 1.035 [26.30] .575 [14.60] .901 [22.90] .417 [10.60] Recommended PCB Layout www.adam-tech.com 321 .100" elevated BOX HEADERS .100" x .100" [2.54 x 2.54] CENTERLINE BHRE SERIES Introduction: Adam Tech BHRE Series Elevated Box Headers provide all of the advantages of our standard Box Headers such as our Low Profile design, snug fit & polarized mating but have additional plastic insulators in place to stabilize rows of pins for stacking applications. This series is available in Straight, Right Angle & SMT mounting with standard or customer specified Stacking Heights and PCB tail lengths. Features: Elevated for Stacking applications Low Profile design Straight, Right Angle & SMT mounting options Standard or customer specified Stacking Heights & PCB tail lengths Mating Sockets: Adam Tech .100" X .100" dual row IDC sockets Specifications: Material: Insulator: PBT, glass reinforeced, rated UL94V-0 Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0 Insulator Color: Black (Gray optional) Contacts: Brass Plating: U = Gold over nickel underplate SG = Gold over nickel underplate on contact area, tin over copper underplate on tails. T = Tin over copper underplate overall Electrical: Operating voltage: 250V AC max. Current rating: 1 Amp max Contact resistance: 20 mΩmax. initial Insulation resistance: 5000 MΩmin. Dielectric withstanding voltage: 1000V AC for 1 minute ORDERING INFORMATION BHRE 50 SERIES INDICATOR BHRE = .100" Elevated Box Header POSITIONS 10, 14, 16, 20, 24, 26, 30, 34, 40, 50, 60, 64 MOUNTING ANGLE V=Vertical H=Horizontal Packaging: Anti-ESD plastic trays Safety Agency Approvals: UL Recognized & CSA Certified, File no. E224053 U A XXX Height DIM X Customer specified in inches PIN LENGTHS A =Standard solder tail B =Special length, solder tail customer specified MT=Surface Mount S Mechanical: Mating durability: 500 cycles min. Temperature Rating: Operating temperature: -40°C to +105°C V CONTACT PLATING U=Gold plated T =Tin plated SG=Gold plating in contact area, Tin on tails OPTIONS: Add designator(s) to end of part number 30=30u" Gold on contact area GY=Gray color insulator HT=Hi-Temp insulator for Hi-Temp soldering processes up to 260°C (Add this option for thru-hole products only. All SMT products are manufactured with Hi-Temp insulators) 322 www.adam-tech.com .100" elevated BOX HEADERS .100" x .100" [2.54 x 2.54] CENTERLINE BHRE SERIES BHRE Elevated Straight PCB MOUNT BHRE-26-Vua-.477 ø BHRE Elevated Right Angle PCB MOUNT BHRE-26-Hua-.477 ø BHRE Elevated SMT BHRE-20-Vu-smt-.477 www.adam-tech.com 323 .100" LATCH HEADER .100" x .100" [2.54 x 2.54] CENTERLINE MHR SERIES Introduction: Adam Tech MHR Series .100" pitch Latch Headers are dual row, PCB mounted, shrouded headers with latches for use with dual row IDC female socket connectors. In addition to providing a shock and vibration proof connection the locking latches also act as ejectors to remove the mating socket. Our low profile, space saving design has a center slot for the socket’s polarization bump. Adam Tech’s Latch Headers are available in Straight PCB Mount, Right Angle PCB and SMT Mounting. Plating options include choice of Gold, Tin or Selective Gold Features: Integral Latches provide Shock and Vibration Proof connection Slot for IDC socket Polarization bump Straight PCB, Right Angle PCB and SMT versions Gold, Tin or Selective Gold plating Elevated option available Hi-Temp insulator available Mating Sockets: .100" X .100" Dual row IDC sockets Specifications: Material: Insulator: PBT, glass reinforeced, rated UL94V-0 Insulator Color: Black (Gray optional) Contacts: Brass ORDERING INFORMATION Plating: U = Gold over nickel underplate overall SG = Gold over nickel on contact area, Tin over copper underplate on tails. T = Tin over copper underplate overall MHR Electrical: Operating voltage: 250V AC max. Current rating: 3 Amps max Contact resistance: 20 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute Mechanical: Mating durability: 500 Cycles min. 40 V SERIES INDICATOR MHR =.100" Shrouded Header with Latches POSITIONS 10, 14, 16, 20, 24, 26, 30, 34, 40, 50, 60, 64 Temperature Rating: Operating temperature: -40°C to +105°C Packaging: Anti-ESD plastic trays Safety Agency Approvals: UL Recognized & CSA Certified, File no. E224053 MOUNTING ANGLE V =Straight Mount H=Right Angle Mount This series is availabe in an elevated version similar to our BHRE Series as shown on pgs. 322-323 U A L LATCHING FEATURES S=Short latches (for sockets w/o strain relief) L =Long latches (for sockets w/strain relief) N=No latches PIN LENGTHS A =Standard length solder tail B=Special length, customer specified CONTACT PLATING U=Gold plated SG=Gold plating in contact area, Tin plated solder tails T =Tin plated OPTIONS: Add designator(s) to end of part number GY = Gray color insulator HT = High-temp insulator for high-temp soldering processes 324 www.adam-tech.com .100" LATCH HEADER .100" x .100" [2.54 x 2.54] CENTERLINE MHR SERIES MHR Latch Options STRAIGHT PCB MOUNT A = .100 [2.54] x No. of Spaces + .860 [21.84] B = .100 [2.54] x No. of Spaces + .460 [11.68] C = .100 [2.54] x No. of Spaces .443 [11.27] A .921 [23.40] .331 [8.40] Header with Short Ejector/Latch for Sockets without Strain Reliefs .025 [0.64] SQ. .100 [2.54] MHR-26-VUAL .171 [4.35] .578 [14.70 1.094 [27.80] .677 [17.20] .134 [3.40] .100 [2.54] C B Header with Long Ejector/Latch for Sockets with Strain Reliefs MHR Right angle PCB MOUNT A = .100 [2.54] x No. of Spaces + .860 [21.84] B = .100 [2.54] x No. of Spaces + .460 [11.68] C = .100 [2.54] x No. of Spaces A C .331 [8.40] .025 [0.64] SQ. .100 [2.54] MHR-26-HUAL .171 [4.35] .921 [23.40] .677 [17.20] .100 [2.54] B .157 [4.00] C ø.040 [1.02] .100 [2.54] .100 [2.54] Recommended PCB Layout www.adam-tech.com 325 .050" BOX HEADERS .050" x .050" & .050" x .100" CENTERLINE HBHR SERIES HBHR SERIES Adam Tech HBHR Series .050" Box Headers are fine pitched, dual row shrouded headers for use with dual row IDC female socket connectors. Our low profile, space saving design has a center slot for the socket’s polarization bump. Adam Tech’s Box Headers are available in Straight PCB Mount, Right Angle PCB Mount and SMT Mounting. Plating options include choice of Gold, Tin or Selective Gold. SMT versions are manufactured with a Hi-Temp insulator. Additional options include latches and custom pin lengths. Features: Shrouded, insulated connection Superior low profile design Slot for IDC socket Polarization bump Straight PCB, Right Angle PCB and SMT versions Gold, Tin or Selective Gold plating Options include Elevated types and integral latches Hi-Temp insulator available Mating Receptacles: Mates with all industry standard .050" [1.27mm] pitch dual row IDC sockets Specifications: Material: Standard insulator: PBT, glass reinforced, rated UL94V-0 Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0 Insulator Color: Black Contacts: Brass Plating: G = Gold over nickel underplate overall SG = Gold over nickel underplate on contact area, tin over copper underplate on tails. T = Tin over copper underplate overall Electrical: Operating voltage: 250V AC max. Current rating: 1 Amp max Contact resistance: 20 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 500V AC for 1 minute ORDERING INFORMATION HBHR-B 20 MOUNTING ORIENTATION V =Vertical mount H = Right angle mount SERIES INDICATOR HBHR-B = Box header .050" x .050" HBHR-A= Box header .050" x .100" Temperature Rating: Operating temperature: -40°C to +105°C Soldering process temperature: 260°C V SG PLATING G=Gold plated SG=Selective gold plating in contact area, tin plated solder tails T =Tin plated POSITIONS 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 Packaging: Anti-ESD plastic trays Approvals and Certifications: UL Recognized & CSA Certified, File no. E224053 This series is availabe in an elevated version similar to our BHRE Series as shown on pgs. 322-323 OPTIONS: Add designator(s) to end of part number 30=30 µin gold plating in contact area SMT=Surface mount leads with Hi-Temp insulator for Hi-Temp soldering processes up to 260°C HT=Hi-Temp insulator for Hi-Temp soldering processes up to 260°C (Add this option for thru-hole products only. All SMT products are manufactured with Hi-Temp insulators) 288 www.adam-tech.com .050" BOX HEADERS .050" x .050" & .050" x .100" CENTERLINE HBHR SERIES .122 [3.10] A B C .050 [1.27] HBHR-B HBHR-B .050" X .050" STRAIGHT PCB MOUNT .050" X .050" RIGHT ANGLE PCB MOUNT A B C .122 [3.10] .189 [4.8] .189 [4.8] .050 [1.27] .212 [5.40] .118 [3.0] .212 [5.40] .090 [2.30] .050 [1.27] .016 [0.40] SQ. A = .050 [1.27] x No. of Spaces + .292 [7.43] B = .050 [1.27] x No. of Spaces + .227 [5.77] C = .050 [1.27] x No. of Spaces .050 [1.27] .016 [0.40] SQ. A = .050 [1.27] x No. of Spaces + .292 [7.43] B = .050 [1.27] x No. of Spaces + .227 [5.77] C = .050 [1.27] x No. of Spaces HBHR-A .050" X .100" STRAIGHT PCB MOUNT A B C HBHR-A A B C .050" X .100" RIGHT ANGle PCB MOUNT .249 [6.32] .249 [6.32] .050 [1.27] .050 [1.27] .327 [8.30] .216 [5.50] .327 [8.30] .216 [5.50] .126 [3.20] .100 [2.54] .016 [0.40] SQ. .016 [0.40] SQ. A = .050 [1.27] x No. of Spaces + .349 [8.87] B = .050 [1.27] x No. of Spaces + .255 [6.47] C = .050 [1.27] x No. of Spaces A = .050 [1.27] x No. of Spaces + .349 [8.87] B = .050 [1.27] x No. of Spaces + .255 [6.47] C = .050 [1.27] x No. of Spaces .122 [3.10] A B C HBHR-B .050" X .050" SMT HBHR-B .050 [1.27] .016 [0.40] SQ. A = .050 [1.27] x No. of Spaces + .292 [7.43] B = .050 [1.27] x No. of Spaces + .227 [5.77] C = .050 [1.27] x No. of Spaces .030 [0.76] C HBHR-A .100 [2.54] .205 [5.20] .236 [6.00] ø.032 [0.80] .050 [1.27] .189 [4.8] .193 [4.90] .100 [2.54] ø.032 [0.80] .050 [1.27] .228 [5.80] .050 [1.27] .094 [2.40] SMT Recommended PCB Layouts www.adam-tech.com 289 .050" Latch HEADERS .050" x .050" & .050" x .100" CENTERLINE HmHR SERIES Introduction: Adam Tech HMHR Series .050" Latch Headers are dual row, PCB mounted, shrouded headers with latches for use with dual row IDC female socket connectors. In addition to providing a shock and vibration proof connection the locking latches also act as ejectors to remove the mating socket. Our low profile, space saving design has a center slot for the socket’s polarization bump. Adam Tech’s Latch Headers are available in Straight PCB Mount, Right Angle PCB and SMT Mounting. Plating options include choice of Gold, Tin or Selective Gold Features: Integral Latches provide Shock and Vibration Proof connection Slot for IDC socket Polarization bump Straight PCB, Right Angle PCB and SMT versions Gold, Tin or Selective Gold plating Elevated option available Hi-Temp insulator available Mating Sockets: .050" X .050" & .050" X .100" Dual row IDC sockets Specifications: Material: Insulator: PBT, glass reinforeced, rated UL94V-0 Insulator Color: Black (Gray optional) Contacts: Brass ORDERING INFORMATION Plating: U = Gold over nickel underplate overall SG = Gold over nickel on contact area, Tin over copper underplate on tails. T = Tin over copper underplate overall Electrical: Operating voltage: 250V AC max. Current rating: 1 Amp max Contact resistance: 20 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 500V AC for 1 minute Mechanical: Mating durability: 500 Cycles min. Temperature Rating: Operating temperature: -55°C to +105°C Packaging: Anti-ESD plastic trays Safety Agency Approvals: UL Recognized & CSA Certified, File no. E224053 26 HMHR V SERIES INDICATOR HMHR = .050" x .100" 2 row PCB HMHR-A = .050" x .050" 2 row PCB HMHR-B = .050" x .100" 4 row PCB A L LATCHING FEATURES S = Short latches (for sockets w/o strain relief) L = Long latches (for sockets w/strain relief) N = No latches POSITIONS 10, 16, 30, 32, 44, 50, 64, 68, 100 U 20, 34, 52, 70, 26, 40, 60, 80, MOUNTING ANGLE V =Straight Mount H=Right Angle Mount PIN LENGTHS A=Standard length solder tail B=Special length, customer specified CONTACT PLATING U=Gold plated SG=Gold plating in contact area, Tin plated solder tails T =Tin plated OPTIONS: Add designator(s) to end of part number SMT=Surface mount leads Dual row with Hi-Temp insulator HT=High-temp insulator for high-temp soldering processes 290 www.adam-tech.com .050" Latch HEADERS .050" x .050" CENTERLINE HMHR SERIES HmHR-A A B .050" X .050" straight PCB MOUNT .050 [1.27] .220 [5.60] .050 [1.27] HMHR-A-50-VUAS C B .050 [1.27] .326 [8.30] .050 [1.27] SQ. .015 [0.40] Ø.031 [0.80] .050 [1.27] A = .050 [1.27] X No. of Spaces + .233 [5.92] B = .050 [1.27] X No. of Spaces C = .050 [1.27] X No. of Spaces + .621 [15.77] Recommended PCB Layout HmHR-A .050" X .050" right angle PCB MOUNT A B .050 [1.27] .220 [5.60] C HMHR-A-34-HUAS .326 [8.30] B .090 [2.30] .050 [1.27] SQ. .015 [0.40] .050 [1.27] A = .050 [1.27] X No. of Spaces + .233 [5.92] B = .050 [1.27] X No. of Spaces C = .050 [1.27] X No. of Spaces + .621 [15.77] .050 [1.27] .050 [1.27] Ø.031 [0.80] Recommended PCB Layout HmHR-A A B .050" X .050" vertical smt .050 [1.27] .220 [5.60] .050 [1.27] HMHR-A-60-VUAS-SMT C B .334 [8.50] REF .326 [8.30] SQ. .015X [0.40] A = .050 [1.27] X No. of Spaces + .233 [5.92] B = .050 [1.27] X No. of Spaces C = .050 [1.27] X No. of Spaces + .621 [15.77] .050 [1.27] .059 [1.50] .248 [6.30] .030 X .094 [0.76 X 2.40] Recommended PCB Layout www.adam-tech.com 291 .050" Latch HEADERS .050" x .100" CENTERLINE HMHR SERIES HmHR-B .050" X .100" straight PCB MOUNT A B .323 [8.20] .100 [2.54] C .602 [15.30] .050 [1.27] .118 [3.00] HMHR-B-50-VUAL .075 [1.905] SQ. .018 [0.46] A = .050 [1.27] X No. of Spaces + .306 [7.78] B = .050 [1.27] X No. of Spaces C = .050 [1.27] X No. of Spaces + .829 [21.07] HmHR-B .050" X .100" 4 ROW right angle PCB MOUNT A B .323 [8.20] .100 [2.54] .106 [2.70] C .602 [15.30] .050 [1.27] HMHR-B-60-HUAL .075 [1.905] SQ. .018 [0.46] A = .050 [1.27] X No. of Spaces + .306 [7.78] B = .050 [1.27] X No. of Spaces C = .050 [1.27] X No. of Spaces + .829 [21.07] Latch Options B .050 [1.27] .225 [5.715] Ø.031 [0.80] .807 [20.50] Header with Short Ejector/Latch for Sockets without Strain Reliefs .075 [1.905] Recommended PCB Layout 292 www.adam-tech.com .952 [24.20] Header with Long Ejector/Latch for Sockets with Strain Reliefs .050" Latch HEADERS .050" x .100" CENTERLINE HMHR SERIES HmHR .050" X .100" straight PCB MOUNT A B .323 [8.20] .100 [2.54] HMHR-80-VUAS C .602 [15.30] .050 [1.27] SQ. .018 [0.46] .118 [3.00] .100 [2.54] A = .050 [1.27] X No. of Spaces + .306 [7.78] B = .050 [1.27] X No. of Spaces C = .050 [1.27] X No. of Spaces + .829 [21.07] HmHR .050" X .100" right angle PCB MOUNT A B .323 [8.20] .100 [2.54] .106 [2.70] C HMHR-50-HUAL .602 [15.30] .050 [1.27] SQ. .018 [0.46] A = .050 [1.27] X No. of Spaces + .306 [7.78] B = .050 [1.27] X No. of Spaces C = .050 [1.27] X No. of Spaces + .829 [21.07] Latch Options B .050 [1.27] .807 [20.50] .100 [2.54] Ø.031 [0.80] Header with Short Ejector/Latch for Sockets without Strain Reliefs .952 [24.20] Header with Long Ejector/Latch for Sockets with Strain Reliefs Recommended PCB Layout www.adam-tech.com 293