DC Blocks o Inside & outside versions available. o Express shipment available on select models. o Low SWR - Maximum SWR remains low through full frequency and power range. o Rugged Construction - Aeroflex / Weinschel semi-precision Type N & SMA stainless steel connectors. o Broadband Designs to 26 GHz. o Planar Bulkhead Models with inside DC Block. General Information In this section of the catalog, each product is outlined utilizing individual data sheets containing product features, specifications, and outline drawings. These data sheets are preceded by a quick reference guide to help you select the product(s) that fits your needs. The page number for each product data sheet is given in the quick reference guide. NOTE: EXPRESS Shipment available via www.argosysales.com or 800-542-4457. Check with distributor for current products and stocking quantities. dc Blocks...dc to 18.0 GHz Model Number Type Connector Type Frequency Range (GHz) Insertion Loss Maximum (dB) SWR (Maximum) Page No. ) 7003 Inside N 9 kHz to 18.6 0.9 1.35-1.50* 172 ) 7006-1 Inside SMA 9 kHz to 20 0.8 1.30-1.50* 173 7010-1 Inside SMA (f) Planar Interface dc - 26.5 0.6-0.9 1.20-1.25 174 7010-2 Inside SMA (m) Planar Interface dc - 26.5 0.6-0.9 1.20-1.25 174 Inside/ Outside SMA 0.5 to 8.6 0.4 1.25 175 ) 7012 * VARIES WITH FREQUENCY. ) EXPRESS Shipment available via www.argosysales.com or 800-542-4457. Note: Other models may also be available from Express delivery. 171 Revision Date: 1/27/2013 DC Blocks Model 7003 Inside DC Block 9 kHz to 18.6 GHz Type N Connectors RoHS EXPRESS www.argosysales.com 800-542-4457 CONNECTORS: Type N connectors per MIL-STD-348 interface dimensions - mate nondestructively with MIL-C39012 connectors. Standard unit has one male and one female connector. Add Prefix M for double male and F for double female connectors. CONSTRUCTION: Stainless steel body and connectors; gold plated beryllium copper contacts WEIGHT: Features Net: 67 g (2.4 oz) PHYSICAL DIMENSIONS: Aeroflex / Weinschel Inside dc Block contains capacitance in-series with the center conductor to prevent the flow of dc current, while permitting RF power to flow without interruption. o Low SWR - Maximum SWR remains low through full frequency and power range. o Rugged Construction - Aeroflex / Weinschel semiprecision Type N stainless steel connectors. Molded captive inner contact/bead assembly provides controlled and stable interface dimensions. o Model 7003 useable to 22 GHz. Specifications NOMINAL IMPEDANCE: 50 Ω FREQUENCY RANGE: 9 kHz to 18.6 GHz MAXIMUM SWR: Frequency (GHz) DIM "A" MAX 21(.84) Model # DIM A 7003 F7003 M7003 54.61 (2.15) 50.80 (2.00) 58.67 (2.31) Connector Type male-female female-female male-male NOTE: All dimensions are given in mm (inches) and are maximum, unless otherwise specified. SCHEMATIC DIAGRAM: SWR* 9 - 20 kHz 20 kHz - 18 1.50 1.35 1 μf * Source & load SWR of test system is <1.2. INSERTION LOSS: 0.9 dB maximum VOLTAGE RATING: +50 Vdc maximum POWER RATING: 20 Watts (average), 100 Watts (peak) TEMPERATURE RANGE: -20 °C to +80 °C (operating) -20 °C to +100 °C (storage) TEST DATA: Test data is available at additional cost. 172 5305 Spectrum Drive, Frederick, MD 21703-7362 s TEL: 301-846-9222, 800-638-2048 s Fax: 301-846-9116 web: www.aeroflex.com/weinschel s email: [email protected] Revision Date: 1/27/2013 DC Blocks Model 7006-1 Inside DC Block 9 kHz to 20.0 GHz RoHS Rugged SMA Connectors EXPRESS www.argosysales.com CONNECTORS: SMA connectors per MIL-STD-348 interface dimensions - mate nondestructively with MIL-C-39012 connectors. Standard unit has one male and one female connector. Add Prefix M for double male and F for double female connectors. 800-542-4457 CONSTRUCTION: Stainless steel body and connectors; gold plated beryllium copper contacts Features WEIGHT: Aeroflex / Weinschel Inside dc Block contains capacitance in-series with the center conductor to prevent the flow of dc current, while permitting RF power to flow without interruption. o Low SWR - Maximum SWR remains low through full frequency and power range. o Rugged Construction - Aeroflex / Weinschel semiprecision SMA stainless steel connectors. Molded captive inner contact/bead assembly provides controlled and stable interface dimensions. PHYSICAL DIMENSIONS: Net:: 4 g (0.14 oz) SMA FEMALE SMA MALE 9.81 (0.38) NOM Specifications DIMENSION “A” NOM NOMINAL IMPEDANCE: 50 Ω FREQUENCY RANGE: 9 kHz to 20 GHz MAXIMUM SWR: Frequency (GHz) 9 - 10 kHz 11 - 20 kHz 20 kHz - 20.0 Model # DIM A 7006-1 F7006-1 M7006-1 37.34 (1.47) 34.54 (1.36) 36.07 (1.42) Connector Type male-female female-female male-male 7006-1 1.50 1.50 1.30 * Source & load SWR of test system is <1.2. NOTE: All dimensions are given in mm (inches) and are maximum, unless otherwise specified. SCHEMATIC DIAGRAM: 1 μf INSERTION LOSS: 0.8 dB maximum* VOLTAGE RATING: +50 Vdc maximum POWER RATING: 20 Watts (average), 100 Watts (peak) TEMPERATURE RANGE: -20 °C to +80 °C (operating) -20 °C to +100 °C (storage) TEST DATA: Test data is available at additional cost. 173 5305 Spectrum Drive, Frederick, MD 21703-7362 s TEL: 301-846-9222, 800-638-2048 s Fax: 301-846-9116 web: www.aeroflex.com/weinschel s email: [email protected] Revision Date: 1/27/2013 DC Blocks Model 7010 PLANAR BULKHEAD with DC Block 10 MHz to 26.5 GHz RoHS SMK Connectors to Planar Interface TEMPERATURE RANGE: 0°C to +60°C (operating) -40°C to +70°C (non-operating) CONNECTORS: Primary connector is SMK (2.92 mm) female or male connector, with a PLANAR INTERFACE on opposite end. Contact Pin Recession of SMK (2.92mm) is 0 to 0.076 mm (0 to 0.003 in) for reference plane. Add -1 for female SMK connector or -2 for SMK male connector CONSTRUCTION: Passivated Stainless steel body and connectors; gold plated beryllium copper contacts WEIGHT: Net: 20 g (0.7 oz) PHYSICAL DIMENSIONS: Features o Usable to 40 GHz. o Eliminates the requirement for a separate dc Block to protect instrument front ends. o Offers the user multiple connector options and quick replacement of damaged connectors. o Provides all the features and versatility of the PLANAR CROWN® Connector System. Model 7010-1 Specifications NOMINAL IMPEDANCE: 50 Ω FREQUENCY RANGE: 10 MHz to 26.5 GHz MAXIMUM SWR: Frequency (GHz) SWR 10 MHz - 18 18 - 26.5 1.20 1.25 Model 7010-2 INSERTION LOSS & REPEATABILITY (dB): Frequency (GHz) 10 MHz - 18 18 - 26.5 Loss 0.6 0.9 Note: SWR and Insertion Loss specifications are based on a mated pair of Models 7010-X and 7005A-XX PLANAR CROWN® connector types. DC BLOCK CAPACITOR RATING: 1,700 pf minimum; + 50 Vdc working voltage SCHEMATIC DIAGRAM: NOTE: Planar Interface 2.92mm Connector All dimensions are given in mm (inches) and are maximum, unless otherwise specified. 174 5305 Spectrum Drive, Frederick, MD 21703-7362 s TEL: 301-846-9222, 800-638-2048 s Fax: 301-846-9116 web: www.aeroflex.com/weinschel s email: [email protected] Revision Date: 1/27/2013 DC Blocks Model 7012 Inside/Outside DC Block 500 MHz to 8.6 GHz RoHS Rugged SMA Connectors DC RESISTANCE: connectors 20 MΩ minimum between any four POWER RATING: 10 Watts peak or CW EXPRESS www.argosysales.com 800-542-4457 Features CONSTRUCTION: Stainless steel body and connectors; gold plated beryllium copper contacts WEIGHT: Net: 4.6 g (0.16 oz) PHYSICAL DIMENSIONS: Aeroflex / Weinschel Aeroflex / Weinschel Inside/Outside dc Block contains capacitance in-series with the center conductor to prevent the flow of dc current, while permitting RF power to flow without interruption. o Low SWR - Maximum SWR remains low through full frequency and power range. o Rugged Construction - Aeroflex / Weinschel semiprecision SMA stainless steel connectors. CONNECTORS: SMA connectors per MIL-STD-348 interface dimensions - mate nondestructively with MIL-C-39012 connectors. Standard unit has one male and one female connector. Specifications NOMINAL IMPEDANCE: 50 Ω FREQUENCY RANGE: 500 MHz to 8.6 GHz MAXIMUM SWR: Frequency (GHz) SWR 500 MHz - 8.6 GHz 1.25 NOTE: All dimensions are given in mm (inches) and are maximum, unless otherwise specified. SCHEMATIC DIAGRAM: INSERTION LOSS (dB maximum): Frequency (GHz) 500 MHz - 8.6 GHz Loss 0.4 BREAKDOWN VOLTAGE: + 200 Vdc between any of the four connectors 175 5305 Spectrum Drive, Frederick, MD 21703-7362 s TEL: 301-846-9222, 800-638-2048 s Fax: 301-846-9116 web: www.aeroflex.com/weinschel s email: [email protected] Revision Date: 1/27/2013