CONVENTIONAL LED LAMPS High Brightness Type φ5 Circular Type LED Lamps〈Focus Type 2θ 1/2:12°〉 SLA-580 Series Blue Green Emitting Surface Dimension (mm) Shape InGaN on SiC 468nm Circular Type Red 523nm 518nm GaP GaAlAs on GaAs 563nm 660nm(single) φ5.0 SLA580BBT SLA580BCT SLA580BDT SLA580EBT SLA580ECT SLA580EDT SLA-580MT SLA-580LT Note) "-" will be taken out for emitting color B/E series. ■ Absolute Maximum Ratings（Ta=25℃） ■ External Dimensions（Unit：mm） φ5.6 Peak Forward Reverse Operating Stotage forward current voltage temperature temperature current IF VR Topr Tstg IFP （mW） （mA） （V） （°C） （°C） （mA） Power Blue SLA580BDT SLA580ECT SLA580EDT 100＊1 5 -20 to +80 4−0.6 -30 to +100 Green SLA-580MT SLA-580LT 30 120 SLA580EBT 1.0 SLA580BCT 1.0Max. SLA580BBT (7.5) 8.5±0.3 φ5.0 Red 75 25 60＊2 100 50 75＊2 4 2.5±1.0 24.0Min. Part No. Emitting dissipation color PD □0.5 -25 to +85 ＊1: IFP measured under duty ≦1/ 10,1kHz ＊2: IFP measured under duty ≦1/ 5,pulse width ≦1ms. （2.5） ■ Electrical Optical Characteristics（Ta=25℃） Part No. Resin Color Forward voltage VF Typ. (V) IF (mA) Reverse current IR Max. (µA) VR (V) Light wavelength Peak Half-wave ∆λ λp Typ. (nm) Typ. (nm) 468 26 IF (mA) SLA580BBT SLA580BCT 3.5 SLA580BDT SLA580EBT SLA580ECT SLA580EDT Transparent Clear 100 5 20 3.8 SLA-580MT 2.3 10 SLA-580LT 1.75 100 ■ Recommemded Pad Layout 4 Brightness IV Min. ( mcd) ■ Directivity 0° Typ. IF (mcd) (mA) 610 1500 900 2500 CATHODE 30° 30° 60° 60° 1350 4000 523 36 518 35 563 40 660 25 2000 4500 20 3000 8000 4700 15000 200 470 ■ Packaging Spacifications（Unit：mm） Packaging Bulk（3F）：1000pcs/Box 1.0 ±0.1 2.0 2.5 70 170 100 （Unit：mm） Tolerance:±0.2 20 90° 100 50 0 50 90° 100 Relative Luminous Intensity (%) (Typ.) CONVENTIONAL LED LAMPS ■ Electrical Characteristic Curves Forward Current - Forward Voltage SLA580BBT 100 SLA580EBT SLA580ECT SLA580EDT 10 Ta=25℃ FORWARD CURRENT : IF (mA) SLA580BDT FORWARD CURRENT : (mA) SLA-580MT 50 SLA580BCT 2.5 3.5 FORWARD VOLTAGE : V 20 10 5.0 2.0 1.0 1 4.5 SLA-580LT 1.5 2.0 2.5 3.0 FORWARD VOLTAGE : VF (V) Relative Luminous Intensity - Case Temperature SLA580BBT IF=20mA SLA580BDT 1.2 SLA580EBT SLA580ECT 1.0 SLA580EDT 0.8 0.6 0.4 -20 0 20 40 60 SLA-580MT 1.4 SLA580BCT RELATIVE LUMINOUS INTENSITY RELATIVE LUMINOUS INTENSITY 1.4 SLA-580LT IF=20mA 1.2 1.0 0.8 0.6 0.4 −20 80 CASE TEMPERATURE : Tc (℃) 0 20 40 60 80 CASE TEMPERATURE : Tc (℃) Relative Luminous Intensity - Forward Current SLA580BBT f=1kHz SLA580BDT SLA580EBT SLA580ECT 1 SLA580EDT 0.5 RELATIVE LUMINOUS INTENSITY RELATIVE LUMINOUS INTENSITY SLA-580MT 5 SLA580BCT 1.5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0 0 SLA-580LT Ta=25℃ 10 30 20 PEAK FORWARD CYRRENT : (mA) 1 5 2 10 20 50 100 FORWARD CURRENT : IF (mA) Ratio of Maximum Tolerable Peak Current - Pulse Duration SLA-580MT SLA580BBT 6 SLA580BCT 10 100 1000 1 10000 5 10 20 PULSE DURATION : Tw (μs) 100Hz 103 100kHz 500Hz 1kHz 200Hz 200kHz 1kHz 2kHz 5kHz 2 50 10 500kHz 2kHz 5kHz 10kHz 20kHz 2 1.5 1 1 50kHz 3 2.4 10kHz SLA580EDT 20kHz SLA580ECT IFP Max / IF Max 100Hz 1kHz 300Hz 3kHz 10kHz IFP Max / IF Max 4 SLA580EBT 3.3 SLA-580LT 5 SLA580BDT 50kHz 10 104 PULSE DURATION : Tw (μs) MAXIMUM FORWARD CURRENT : IF Max. (mA) SLA580BBT SLA580BCT 40 SLA580BDT SLA580EBT 30 SLA580ECT SLA580EDT 20 10 0 -20 -10 0 10 20 30 40 50 60 70 80 90 100 AMBIENT TEMPERATURE : Ta (℃) MAXIMUM FORWARD CURRENT : IF Max. (mA) Derating SLA-580MT SLA-580LT 60 50 40 30 20 10 0 -25 -20 -10 0 10 20 30 40 50 60 70 80 90 AMBIENT TEMPERATURE : Ta (℃) Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1