Silicon Limiter PIN Diode MLP7100 Series Chip SOD-323 CS37 CS20 CS19 DESCRIPTION Features The Aeroflex / Metelics MLP71XX Series Limiter diodes are specially processed PIN diodes with a thin intrinsic region designed for use in passive or active limiters over the entire range of frequencies from 100 MHz to beyond 20 GHz. The different “I” region thicknesses and capacitances provide variable threshold and leakage power levels and power handling capability • Low Loss • Greater Bandwidth • Fast Turn on Time Maximum Ratings Rating Limits Units Operating Temperature -55 to +150 °C Maximum Leakage Current 0.5 mA at 88% of minimum breakdown ESD & MSL Ratings Class 0 (Human Body Model) & MSL1 Electrical Characterisitics TCASE =+25 °C Reverse Voltage Total Total Series Series Capacitance* Capacitance* Resistance Resistance Lifetime Pulsed Thermal Resistance Thermal Resistance VB CT CT RS RS TL Condition IR=10uA VR=0V, f=1MHz VR=6V, f=1MHz IF=10mA, F=1GHz IF=1mA, F=1GHz IF=10mA, IR=6mA 1uS pulse UOM V pF pF Ohm Ohm nS ºC/W ºC/W Spec Typ Typ Max Typ Typ Typ Typ Max MLP7100 20 - 45 0.2 0.15 1.5 5 5 20 100 MLP7101 20 - 45 0.5 0.3 1.2 4.5 10 12 80 MLP7102 20 - 45 0.7 0.5 1 4 10 10 55 MLP7110 45 - 75 0.2 0.15 1.5 4 10 15 80 MLP7111 45 - 75 0.5 0.3 1.2 3.5 15 10 60 MLP7112 45 - 75 0.7 0.5 1 3 20 6 40 MLP7120 120 - 180 0.2 0.15 1.5 3.5 50 1.2 40 MLP7121 120 - 180 0.6 0.3 1 3 50 0.5 20 MLP7122 120 - 180 0.8 0.5 0.5 3 100 0.3 15 MLP7130 15 - 30 0.12 0.1 2 4 5 30 120 MLP7131 15 - 30 0.2 0.15 1.5 3 5 20 80 MLP7140 30 - 60 0.12 0.1 2 4 7 20 100 MLP7141 30 - 60 0.2 0.15 1.5 4 7 15 70 * CT value given in chip form and will vary depending upon the desired packaging type. Document No. DS 14417 Rev A, ECN 10970 Revision Date: 10/25/2011 Silicon Limiter PIN Diodes MLP7100 Series RF Characteristics TCase = +25°C Leakage Pout Insertion Loss C.W. Power In Recovery Time Peak Power In Threshold UoM dBm dB dBm dB W nS Spec. Maximum Typical Typical Typical Maximum Typical MLP7100 50 10 22 0.1 2 10 MLP7101 53 10 24 0.2 3 10 MLP7102 56 10 25 0.2 4 10 MLP7110 53 15 27 0.1 3 20 MLP7111 56 15 29 0.2 4 20 MLP7112 59 15 31 0.2 5 20 MLP7120 60 20 39 0.1 5 50 MLP7121 63 20 41 0.2 10 50 MLP7122 66 20 44 0.2 15 50 MLP7130 47 7 19 0.1 2 5 MLP7131 50 7 22 0.1 3 5 MLP7140 47 12 24 0.1 3 10 MLP7141 50 12 27 0.1 4 10 Outline Drawings CS11 (C11) CS20 (H20) 0.013 ± 0.002 (0.330 ± 0.051) 102 [2.591] Dia 81 [2.057] 23 [0.584] 17 [0.432] Anode Cut lead is Cathode Anode Diameters MLP7130-11: 1.1 mil min MLP7131-11: 1.4 mil min 0.013 ± 0.002 (0.330 ± 0.051) 104 [2.642] 92 [2.337] Square 130 [3.302] Min. 2 Pls 8 [0.203] 4 [0.102] 6 [0.152] 3 [0.076] 0.006 ± 0.001 (0.152 ± 0.025) 0.1 um thick minimum 35 [0.889] 25 [0.635] Dimensions are in inches ( mm ) 2 603-641-3800 • 888-641--SEMI (7364) • [email protected] • www.aeroflex.com/metelics Document No. DS 14417 Rev A, ECN 10970 Revision Date: 10/25/2011 Silicon Limiter PIN Diodes MLP7100 Series CS37 (T86) SOD-323 124 [3.150] Dia. 118 [2.997] .106 [2.692] .094 [2.388] .075 [1.905] .063 [1.600] 64 [1.626] 60 [1.524] 27 [0.686] Max. .057 [1.448] .045 [1.143] .016 [0.406] .010 [0.254] Ceramic Body Cathode Strip 225 [5.715] 205 [5.207] 64 [1.626] 60 [1.524] .043 [1.092] .034 [0.864] .006 [0.152] .003 [0.076] 64 [1.626] Dia. 60 [1.524] .004 [0.102] .003 [0.076] 83 [2.108] Dia. 77 [1.956] Cathode (T86) CS19 EPOXY ENCAPSULATION GOLD PLATED CONTACTS Y WRAP AROUND TERMINATIONS B Y DOT DENOTES CATHODE END PKG STYLE X C W C A SOLDER LAYOUT W DIM. DIMENSIONS X DIM Y DIM. CS19-1 12 (.304) 60 (1.52) CS19-2 12 (.304) 75 (1.91) 50 (1.27) CS19-3 12 (.304) 100 (2.54) CS19-4 12 (.304) 120 (3.05) CS19-5 12 (.304) CS19-6 40 (1.01) Z DIM. 30 (.762) A SOLDER LAYOUT (TYP.) B C 72 (1.83) 40 (1.52) 20 (.508) 35 (.889) 87 (2.21) 70 (1.78) 20 (.508) 50 (1.27) 35 (.889) 112 (2.84) 70 (1.78) 20 (.508) 60 (1.52) 35 (.889) 132 (3.35) 80 (2.03) 20 (.508) 200 (5.08) 100 (2.54) 35 (.889) 212 (5.38) 120 (3.05) 20 (.508) 10 (.254) 40 (1.01) 20 (.508) 30 (.762) 50 (1.27) 30 (.762) 15 (.381) CS19-7 10 (.254) 60 (1.52) 20 (.508) 30 (.762) 70 (1.78) 30 (.762) 15 (.381) TOL. ± 2.0 (.051) 3.0 (.076) 3.0 (.076) NOM. NOM. NOM. MAX. PACKAGE CP AND LP .06 pF .4 nH .07 pF .4 nH .08 pF .5 nH .09 pF .6 nH .10 pF .6 nH .05 pF .4 nH .06 pF .4 nH NOM. Note: Dimenisions are in inches (mm) 603-641-3800 • 888-641--SEMI (7364) • [email protected] • www.aeroflex.com/metelics Document No. DS 14417 Rev A, ECN 10970 Revision Date: 10/25/2011 3 Silicon Limiter PIN Diodes MLP7100 Series Ordering Information Example Part: MLP71XX-XX, replace –XX with desired case style suffix -11 CS11 (C11), Silicon Die -19 CS19, Surface Mount, Epoxy Encapsulated -20 CS20 (H20), Surface Mount, Ceramic Package -37 CS37 (T86), Pill Package, Ceramic Body 0 SOD323, Surface Mount, Plastic Package Aeroflex / Metelics, Inc. ISO 9001:2008 certified companies 54 Grenier Field Road, Londonderry, NH 03053 Tel: (603) 641-3800 Sales: (888) 641-SEMI (7364) Fax: (603)-641-3500 975 Stewart Drive, Sunnyvale, CA 94085 Tel: (408) 737-8181 Fax: (408) 733-7645 www.aeroflex.com/metelics [email protected] Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2011 Aeroflex / Metelics. All rights reserved. Document No. DS 14417 Rev A, ECN 10970 Revision Date: 10/25/2011 Our passion for performance is defined by three attributes represented by these three icons: solution-minded, performance-driven and customer-focused.