BIAS TEES 2.9mm, up to 40 GHz, 16 Volts / 150 mA SPECIFICATIONS: Models: 8812KMFX-YY, 8812kFFX-YY, 8812KMMX-YY, 8812KFMX-YY Electrical: 12 kHz - 40 GHz 26.5 & 40 GHz Frequency Range Standard Freq. Values VSWR 12 - 100 kHz 100 kHz - 40 GHz Insertion Loss 12 - 50 kHz 50 kHz - 18 GHz 18 - 40 GHz Impedance Isolation (RF to Bias Port) 250 kHz - 26.5 GHz 100 kHz - 40 GHz DC Voltage DC Current Rise Time (10-90%) Typical performance from 12 kHz - 40 GHz 2.50:1 Max. 1.80:1 Max. Insertion Loss (dB) 0 3.0dB Max. 1.5dB Max. 3.0dB Max. 50 Ohms -1.0 -1.5 -2.0 -2.5 50dB Typical 30dB Typ. 16 VDC Max. 150 mA Max. < 9 pS Typical -3.0 .00001 .0001 .001 .01 .1 FREQ (GHz) 1 .1 FREQ (GHz) 1 2.0 BNC Connectors Nickel Plated Brass Conductors Housing SMA Connectors Gold Plated Beryllium Copper Gold Plated Brass Passivated Stainless Steel Mates with MIL-STD-348 Mates with MIL-STD-348 VSWR Mates with SMA, 23.5mm and K* Series Connectors as well as SMK IAW MIL-STD-348 1.5 1.0 0.5 0.0 .00001 * K is a Trademark of Anritsu Corp. .0001 .001 .01 .50±.03 [12.70±0.76] DC Input Connector Options BNC Female, X=3 .25 [6.35] Connector Configuration Port AC AC + DC Female Male 1.060 [26.92] Cent. Overall Length Max. 1.63 [41.40] 8812KFFX-YY Female 8812KMMX-YY Male Male 1.75 [44.45] 8812KFMX-YY Female Male 1.63 [41.40] 100 40 .244 [6.20] DC Input (SMA Female Conn.) Option X = 2 1.20 [30.48] AC + DC Port AC Port Female 1.60 [40.64] .63 [16.00] .19 [4.83] Overall Length Ordering Examples: HOW TO ORDER: Model Number: 8812KZZX-YY Base Number 10 .489 [12.42] Centered 3X Ø.102 [Ø2.59] THRU 8812KMFX-YY 100 40 2.5 Passivated Stainless Steel 2.9mm Connectors Model Numbers 10 3.0 Mechanical: Solder Post, X=1 -0.5 Freq. Range Model Number: 8812KFF2-26 12 kHz - 26.5 GHz, 2.9mm Fem/Fem SMA Female DC ConnectorType 26 = 12 kHz - 26.5 GHz DC Connector Type Model Number: 8812KMF1-40 40 = 12 kHz - 40 GHz 1 = Solder Post 12 kHz - 40 GHz, 2.9mm Male/Fem 2 = SMA Female Conn. Solder Post DC ConnectorType 3 = BNC Female Conn. Note: Dimensions in Brackets are Expressed in Millimeters and are for Reference Only. Design specifications are subject to change without notice. 8812K: REV E Contact factory for technical specifications before purchasing or use. Aeroflex / Inmet, Inc. • 300 Dino Drive, Ann Arbor, MI 48103 • U.S.A. 888-244-6638 or 734-426-5553 • FAX: 734-426-5557 www.aeroflex.com/inmet • [email protected]