Model 1506A Type N Broadband Resistive Power Dividers, dc

Power Splitters & Dividers
Model 1506A
Broadband Resistive Power Divider
dc to 18.0 GHz
1 Watt
Precision N Connectors
RoHS
MAXIMUM SWR:
EXPRESS
www.argosysales.com
800-542-4457
Features
o Accurate Division and Low Frequency Sensitivity The symmetry of output power between the two arms is
excellent across the frequency range.
o High Stability - Low temperature and power coefficients ensure attenuation stability.
o Test Data - Each divider is calibrated at four
frequencies, and the data is supplied on a
permanently attached test data plate.
o Matched Ports - Symmetrical 6 dB division permits any
port to be used as input.
Frequency (GHz)
SWR
dc - 10
10 - 18
1.25
1.35
POWER COEFFICIENT: < 0.005 dB/dB/watt
TEMPERATURE COEFFICIENT: < 0.0004 dB/dB/°C
TEMPERATURE RANGE: -55°C to +125°C
CONSTRUCTION: Nickel plated brass body; stainless steel
connectors; gold plated beryllium copper contacts.
TEST DATA: Insertion loss data supplied at 50 MHz, 6.0,
12.0, and 18.0 GHz on nameplate only. No paper data supplied. Other test data can be provided at additional cost.
CONNECTORS: Type N connectors per MIL-STD-348
interface dimensions - mate nondestructively with MIL-C39012 connectors.
WEIGHT: Net 140 g (5 oz)
PHYSICAL DIMENSIONS:
Specifications
NOMINAL IMPEDANCE: 50 Ω
FREQUENCY RANGE: dc to 18.0 GHz
MAXIMUM INPUT POWER: 1 watt CW, 1 kilowatt peak
(5 μsec pulse width, 0.05 % duty cycle)
INSERTION LOSS (between input & one output arm):
6 dB nominal, -0.2, +1.2 dB maximum to 10.0 GHz; +1.5
dB maximum to 18.0 GHz.
NUMBER OF PORTS: 3, interchangeable for input and
output
PHASE TRACKING: 5° maximum between ports (J2 & J3)
with input connector (J1).
J1
J2
NOTE:
J3
All dimensions are given in mm (inches) and are
maximum, unless otherwise specified.
AMPLITUDE TRACKING (Maximum):
Frequency (GHz)
dc - 4
4 - 10
10 - 18
Tracking
0.2 dB
0.4 dB
0.5 dB
161
5305 Spectrum Drive, Frederick, MD 21703-7362 s TEL: 301-846-9222, 800-638-2048 s Fax: 301-846-9116
web: www.aeroflex.com/weinschel s email: [email protected]
Revision Date: 9/30/2012