ATTENUATORS SMA, DC - 2.5 GHz, 20 Watts, Conduction Cooled SPECIFICATIONS: Models: 9097-XX, 9097-XXF, 9097-XXM Electrical: Frequency Range Standard dB Values* Attenuation Accuracy 40 dB VSWR Power Handling** Input Output Peak Impedance Operating Temp Range DC - 2.5 GHz 40 dB ±0.75 dB 1.25:1 Max. 20 Watts Avg. 5 Watts Avg. 250 Watts Max. 50 Ohms -55°C to +125°C Mechanical: SMA Connectors LENGTH Male/Female 3.78 ±.04 [96.0 ±1.0] Male/Male 3.92 ±.04 [99.6 ±1.0] Female/Female 3.65 ±.04 [92.7 ±1.0] Passivated Stainless Steel Mates with MIL-STD-348 Conductors Housing Table: Connector Configuration Gold Plated Beryllium Copper Aluminum with Chemical Conversion Coating. ** Power handling capacity is dependant upon proper heatsinking. Surface temperature of unit shall not exceed 125°C for specifications shown. Unit is a unidirectional device. Input shall be at male port unless otherwise specified. 3.084±.010 [78.33±0.25] .50 [12.70] 2.750 [69.85] .167 [4.24] .25 [6.35] 1.375 [34.93] .25 [6.35] Input 1.000 [25.40] .75 [19.05] LENGTH SEE TABLE HOW TO ORDER: Model Number: 9097-XXY dB Value 1.50 [38.10] 2x Ø.15 [Ø3.81] THRU Connector Configuration = Male/Female F = Fem/Fem M = Male/Male Ordering Examples: Model Number: 9097-40 20 dB; SMA - Male/Fem Model Number: 9097-40F 6 dB; SMA - Fem/Fem Note: Dimensions in Brackets are Expressed in Millimeters and are for Reference Only. Design, specifications are subject to change without notice. Contact factory for technical specifications before purchasing and/or use. 9097: REV A Aeroflex / Inmet, Inc. • 300 Dino Drive, Ann Arbor, MI 48103 • U.S.A. 888-244-6638 or 734-426-5553 • FAX: 734-426-5557 www.aeroflex.com/inmet • [email protected]