KA2004-BE10A Printheads Compact Battery drivable thick film thermal printhead (8dots / mm) KA2004-BE10A Compact and lightweight they are ideal printheads for handheld printers and PDAs (personal digital assistants). zApplications Mobile printers EFT-POS printers Hand-held printers Debit printers zFeatures 1) The B series brings reduced height of protective resin for IC and enlarged paper pathway for thermal papers. Thanks to ROHM’s latest LSI high integrated mounting technology and it’s ultra slim 192bit driver IC. 2) The B series accede the great world class low energy consumption characteristics of GP series. 3) Because the print heads circuits draw 2.7V, the printer can be driven using a single lithium battery. zExternal dimensions (Unit : mm) Max.1.7 (1.1) (7.35) Dot #832 Dot #1 Exposed Conductor Side No.1 M No.21 ax .φ 8. 0 (10) 1.4±0.3 MAX.12.5 117 104 (Effective Print Width) Insert Direction Connector 1/4 KA2004-BE10A Printheads zEquivalent circuit DOT #832 VH DOT #1 L-GND VDD 6 5 4 3 2 1 STB6 STB5 STB4 STB3 STB2 STB1 LAT LATCH REGISTER DI SHIFT REGISTER CLK DO THERMISTOR 30kΩ B:3950 TM TM Fig.1 zPin assignments No. Circuit No. Circuit 1 VH 12 VDD 2 VH 13 STB4 3 DO 14 STB5 4 LAT 15 STB6 5 GND 16 GND 6 GND 17 GND 7 STB1 18 CLK 8 STB2 19 DI 9 STB3 20 VH 10 TM 21 VH 11 TM Note) The GND terminal 5 and 6 are not connected with the GND terminal 16 and 17. These terminals shall be connected each other at the closest point to the printhead. 2/4 KA2004-BE10A Printheads zTiming chart tw CLK CLOCK (CLK) t setup DI t hold DI DATA IN (DI) "High":BLACK "Low" :WHITE td DO DATA OUT (DO) "High":BLACK "Low" :WHITE t setup LAT t hold LAT LATCH (LAT) "High":HOLD "Low" :THROUGH tw LAT t setup STB STROBE (STB) tdo tdo DRIVER OUT Fig.2 zCharacteristics Parameter Effective printing width Dot pitch Total dot number Average resistance value Symbol Typical Unit − 104 mm − 0.125 mm − 832 dots Rave 176 Ω Applied voltage VH 7.2 V Applied power PO 0.26 W/dot Print cycle SLT 1.25 ms Pulse width TON 0.51 ms Maximum number of dots energized simultaneously − 192 dots Maximum clock frequency − 8 MHz Maximum roller diameter − φ8.0 Running life / pulse life − 50/1×10 km/pulses Operating temperature − 0~50 °C mm 8 3/4 KA2004-BE10A Printheads zElectrical characteristic curves 0.8 0.8 1.8 0.6 1.4 0.5 0.4 0.3 0.2 0.1 0 0 1 2 3 4 5 SCANNING LINE TIME (ms/line) SLT : 2.50ms/line 0.7 0.6 ENERGY (mJ/dot) 1.6 OPTICAL DENSITY ENERGY (mJ/dot) Paper : KF50-HDA (OJI) 0.7 1.2 1.0 0.8 0.6 0.4 0.3 0.4 0.2 0.2 0.1 0.0 0.00 0.05 0.10 0.15 0.20 0.25 0.30 ENERGY (mJ/dot) Fig.3 Adaptive speed chart 0.5 Fig.4 Representative density curve 0 0 1 2 3 4 5 SCANNING LINE TIME (ms/line) Fig.5 Maximum energy curve 180 160 RESISTANCE : (kΩ) 140 120 100 80 60 40 20 0 −20 −10 0 10 20 30 40 50 60 70 TEMPERATURE : (°C) Fig.6 Thermistor curve 4/4 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1