FSD Series Flash SATA DOM Features Standard/Vertical type Low-profile /Vertical type ● Serial ATA II standard interface; Serial ATA Standard III for 32 GB ● Capacity: 128 MB to 32 GB ● Suitable for high demanding applications ● Well performed under harsh operating environment and industrial temperatures ● Anti-vibration & shock resistance ● Data integrity with Error Detection Code/Error Correction Code (EDC/ECC) ● Perfect replacement of hard drive, compatible with Serial ATA ● High operating reliability & durability ● Low power consumption ● Fully compatible with devices and OS ● Intelligent system for error recovery ● Excellent data transfer speed Introduction Axiomtek’s FSD (Flash SATA DOM) series is designed into Serial ATA II protocol type with compatible Serial ATA standard interface based on flash memory technology. This flash module is offered with various capacities ranging from 128 MB up to 32 GB and can operate under industrial temperature range goes from -40°C ~ 85°C in the harsh operating environments. The features of reliability, high performance, cost-effective and easy-tointegrate designs make FSD series a perfect solution over traditional storage devices. System General Specification Capacity Interface 128 MB~32 GB Serial ATA Standard II (3Gb/s) Serial ATA Standard III (6Gb/s) for 32GB Flash type SLC Connector 7-pin Form Factor Vertical/Standard and Vertical/Low-Profile Sustained Speed Rate 128 MB ~16 GB : (Max) Read: 68 MB/sec.; Write: 62 MB/sec. 32 GB: Read: 300 MB/sec.; Write: 130 MB/sec. Environmental Specification Operating Temperature 0˚C ~ 70˚C (0°F ~158°F) (standard temp.) -40˚C ~ 85˚C (-40 °F ~185°F) (industrial temp.) Storage Temperature -55˚C ~ 95˚C (-67°F ~203°F) Humidity 10% ~ 95% non-condensing Vibration 5G (7 ~ 2000Hz) Shock 50G/ 10ms System Reliability ECC technology High reliability based on the internal ECC function MTBF >3,000,000 hours R/W Endurance 2,000,000 times Wear-leveling Support Power Requirment DC Input Voltage 5V single power supply operation Power Mode Auto stand-by and sleep mode Power Consumption 128 MB ~16 GB Read: 235 mA, Write: 254 mA, Idle: 100 mA only for 32 GB Read: 120 mA, Write: 130 mA, Idle: 100 mA Physical Specification Enclosure Material PC Mechanical Cover and UL-94 Dimensions Standard: 20.9 mm x 39.5 mm x 7.9 mm (W xL x H) Low profile: 32.9 mm x 29.5 mm x 8.0 mm Ordering Information Models (standard temp.) FSD128SSVCT FSD256SSVCT FSD512SSVCT FSD01GSSVCT FSD02GSSVCT FSD04GSSVCT FSD08GSSVCT FSD16GSSVCT FSD32GSSVC1T FSD128SLVCT FSD256SLVCT FSD512SLVCT FSD01GSLVCT FSD02GSLVCT FSD04GSLVCT FSD08GSLVCT FSD16GSLVCT FSD32GSLVC1T Models (industrial temp.) FSD128SSVWT FSD256SSVWT FSD512SSVWT FSD01GSSVWT FSD02GSSVWT FSD04GSSVWT FSD08GSSVWT FSD16GSSVWT FSD32GSSVW1T FSD128SLVWT FSD256SLVWT FSD512SLVWT FSD01GSLVWT FSD02GSLVWT FSD04GSLVWT FSD08GSLVWT FSD16GSLVWT FSD32GSLVW1T Form Factor Capacity Standard/SATA Standard/SATA Standard/SATA Standard/SATA Standard/SATA Standard/SATA Standard/SATA Standard/SATA Standard/SATA Low-Profile/SATA Low-Profile/SATA Low-Profile/SATA Low-Profile/SATA Low-Profile/SATA Low-Profile/SATA Low-Profile/SATA Low-Profile/SATA Low-Profile/SATA 128MB 256MB 512MB 1GB 2GB 4GB 8GB 16GB 32GB 128MB 256MB 512MB 1GB 2GB 4GB 8GB 16GB 32GB * All specifications and photos are subject to change without notice.