Q7M110 Freescale i.MX53 Qseven SoM Features ● Ultra Low power consumption Cortex™-A8 (0ºC ~ 60ºC) ● High flexibility Qseven v1.2 compliant design ● 1 CAN ● 24-bit TTL LCD ● LVDS/HDMI 1080p ● Linux2.6.35/Android2.3.3 ● 10/100 Mbps Ethernet ● Audio NEW Freescale i.MX53 CPU Onboard DDR3 1GB Memory eMMC 4 GB Q7M110-110-EVK System Processor System Memory OS Storage RTC Power Requirement Size Board Thickness Operating Temperature Operation Humidity Ordering Information Freescale i.MX53 Series SoC with ARM Cortex™-A8 CPU 1GHz On-board DDR3 1GB Linux kernel 2.6.35 , Android 2.3.3 eMMC flash 4 GB SDIO interface SATA interface Battery on the Baseboard is required +5V, 1A 70 x 70 mm 1.2 mm ± 0.1mm 0ºC ~ 60ºC 10% ~ 95%, non-condensing Standard Q7M110-535-C (P/N:S38Q11020E) Optional Q7B110-110-EVK Q7M110-536-A Q7M110 with Freescale iMX535 1GHz (Consumer) SoC, 1GB Memory, 4 GB eMMC, 10/100 Mbps Ethernet, audio, CAN Evaluation Kit Board Q7M110 with Freescale iMX536 800GHz (Automotive) SoC, 1GB Memory, 4 GB eMMC, 10/100 Mbps Ethernet, audio, CAN I/O Graphics Ethernet Audio USB I2C SPI CAN GPIO UART 211 1 VGA, 1 Dual channel 24-bit LVDS 1 HDMI 1080p, 1 24-bit TTL Signal 1 10/100 Mbps MIC-in/headphone 1 OTG client and 1 USB 2.0 port 2 Yes 1 2.0B protocol-compatible Controller Area Network (CAN) via Qseven MXM interface 8 1 (TX/RX/RTS/CTS), 1 (TX/RX), 1 Full function (9 PIN) * All specifications and photos are subject to change without notice.