DOMINANT Opto Technologies Innovating Illumination SpiceLED TM DATA SHEET: SpiceLEDTM InGaN White S-Spice : SSW-SLD TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size yet the SpiceLED™ packs a powerful performance and is a highly reliable design device. Its versality enables its application in automotive applicances, key-pad illumination, hand-held devices such as PDAs, notebooks, compact back-lighting applications, consumer appliances, office equipment, audio and video equipment. Features: > > > > > > High brightness surface mount LED. Super wide viewing angle of 160°. Equivalent to 0603 package outline. Copper lead-frame construction. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer Appliances: LCD illumination as in PDAs, LCD TV. > Communication: indicator and backlight in mobilephone, flash light. > Display: full color display video notice board. > Industrial: white goods (eg: Oven, microwave, etc.). © 2005 SpiceLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 13/03/2014 V4.0 DOMINANT TM InGaN White S-Spice : SSW-SLD Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Viewing Angle˚ Luminous Intensity @ 2mA IV (mcd) Min. Typ. Max. SSW-SLD-LM2-1 White 160 11.20 22.40 28.50 SSW-SLD-L2N1-1 White 160 14.00 28.50 35.50 NOTE 1. All part number above comes in a quantity of 3000 units per reel. 2. Other luminious intensity groups are also available upon request 3. Luminous intensity is measured with an accuracy of ± 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. Electrical Characteristics at Ta=25˚C Vf @ If = 2mA Part Number SSW-SLD Vf @ If = 10mA Vr @ Ir = 10uA Min. (V) Typ. (V) Max. (V) Typ. (V) Min. (V) 2.6 2.8 3.0 3.0 5 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 15 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 100 mA 5 V 1000 V 110 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 45 mW Reverse voltage; Ir max = 10µA ESD threshold (HBM) LED junction temperature Power dissipation (at room temperature) 2 13/03/2014 V4.0 DOMINANT TM InGaN White S-Spice : SSW-SLD Opto Technologies Innovating Illumination SSW-SLD, White Color Grouping Dominant White Bin Structure 0.44 0.42 0.40 E3 0.38 E4 E1 0.36 C3 0.34 C4 C1 0.32 C2 A3 0.30 A1 0.28 V3 0.26 V1 0.24 E2 A4 A2 V4 V2 0.22 0.20 0.18 0.16 0.24 0.26 0.28 0.3 0.32 0.34 0.36 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin V1 V2 V3 V4 A1 A2 A3 A4 C1 C2 C3 C4 Cx 1 2 3 4 0.2525 0.2650 0.2650 0.2525 0.2493 Cy 0.2318 0.2525 0.2700 Cx 0.2525 0.2650 0.2650 0.2525 0.2318 Cy 0.2143 0.2350 0.2525 Cx 0.2650 0.2775 0.2775 0.2650 0.2700 Cy 0.2525 0.2732 0.2907 Cx 0.2650 0.2775 0.2775 0.2650 0.2525 Cy 0.2350 0.2557 0.2732 Cx 0.2775 0.2900 0.2900 0.2775 0.2907 Cy 0.2732 0.2939 0.3114 Cx 0.2775 0.2900 0.2900 0.2775 0.2732 Cy 0.2557 0.2764 0.2939 Cx 0.2900 0.3025 0.3025 0.2900 0.3114 Cy 0.2939 0.3146 0.3321 Cx 0.2900 0.3025 0.3025 0.2900 0.2939 Cy 0.2764 0.2971 0.3146 Cx 0.3025 0.3150 0.3150 0.3025 0.3321 Cy 0.3146 0.3354 0.3529 Cx 0.3025 0.3150 0.3150 0.3025 0.3146 Cy 0.2971 0.3179 0.3354 Cx 0.3150 0.3275 0.3275 0.3150 0.3529 Cy 0.3354 0.3561 0.3736 Cx 0.3150 0.3275 0.3275 0.3150 0.3386 0.3561 0.3354 Cy 0.3179 3 13/03/2014 V4.0 DOMINANT TM InGaN White S-Spice : SSW-SLD Opto Technologies Innovating Illumination Bin E1 E2 E3 E4 Cx 1 2 3 4 0.3275 0.3400 0.3400 0.3275 0.3736 Cy 0.3561 0.3768 0.3943 Cx 0.3275 0.3400 0.3400 0.3275 0.3561 Cy 0.3386 0.3593 0.3768 Cx 0.3400 0.3525 0.3525 0.3400 0.3943 Cy 0.3768 0.3975 0.4150 Cx 0.3400 0.3525 0.3525 0.3400 0.3800 0.3975 0.3768 Cy 0.3593 Dominant color coordinate is measured with an accuracy of ± 0.01. 4 13/03/2014 V4.0 DOMINANT TM InGaN White S-Spice : SSW-SLD Opto Technologies Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group L1 11.20...14.00 L2 14.00...18.00 M1 18.00...22.40 M2 22.40...28.50 N1 28.50...35.50 Luminous intensity is measured with an accuracy of ± 11%. 5 13/03/2014 V4.0 DOMINANT TM InGaN White S-Spice : SSW-SLD Opto Technologies Innovating Illumination Forward Current Vs Forward Voltage 6 35 5 30 Forward Current; mA Relative Intensity; Normalized at 2mA Relative Intensity Vs Forward Current 4 3 2 1 25 20 15 10 5 0 0 0 2 4 6 8 10 0 1 2 3 4 Forward Current; mA Forward Voltage; V Maximum Current Vs Ambient Temperature Relative Intensity Vs Wavelength 1 20 0.8 15 Relative Intensity Forward Current; mA 0.9 10 5 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0 10 20 30 40 50 60 70 80 90 100 400 450 500 550 600 650 700 750 800 Wavelength; nm Ambient Temperature Radiation Pattern 30 o 20 o 10 o 0o 1.0 40 o 50 o 60 o 70 o 80 o 90 o 0.8 0.6 0.4 0.2 0 6 13/03/2014 V4.0 DOMINANT TM InGaN White S-Spice : SSW-SLD Opto Technologies Innovating Illumination SpiceLED • InGaN White S-Spice : SSW-SLD Package Outlines TM Note: The center pad is a common cathode. Please take care during soldering to avoid shorting. Material Material Cu Alloy With NiPdAu Plating Lead-frame High Temperature Resistant Epoxy Resin Package Note: product is Pb free 7 13/03/2014 V4.0 DOMINANT TM InGaN White S-Spice : SSW-SLD Opto Technologies Innovating Illumination Recommended Solder Pad Note: Component is based on a new package platform, which features “Bottom Only Terminations“. Solder joints are only formed at the bottom of the component and solder fillet will not be observable as the sides of the component. Surface are not intended for soldering 8 13/03/2014 V4.0 DOMINANT TM InGaN White S-Spice : SSW-SLD Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 3000 units. • Reel diameter is 180 mm. Current New Issue No : 1 Page 1 of 2 9 13/03/2014 V4.0 DOMINANT TM InGaN White S-Spice : SSW-SLD Opto Technologies Innovating Illumination Packaging Specification 10 13/03/2014 V4.0 DOMINANT TM InGaN White S-Spice : SSW-SLD Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc SpiceLED 1 completed bag (3000pcs) 0.001 0.034 140 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For SpiceLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 45,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 288,000 MAX 11 13/03/2014 V4.0 DOMINANT TM InGaN White S-Spice : SSW-SLD Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 12 13/03/2014 V4.0 DOMINANT TM InGaN White S-Spice : SSW-SLD Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - New Format 23 Feb 2006 - Update company name 29 Mar 2010 8 Update Carrier Tape 13 Feb 2014 3, 4 Update Dominant Bin Structure 13 Mar 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 13 13/03/2014 V4.0 DOMINANT TM Opto Technologies InGaN White S-Spice : SSW-SLD Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM