DOMINANT Opto Technologies Innovating Illumination SpiceLED TM DATA SHEET: SpiceLEDTM InGaN Warm White S-Spice : SSF-LLG TM Like spice, its diminutive size is a stark contrast to its standout performance in terms of brightness, durability and reliability. Despite being the smallest in size yet the SpiceLED™ packs a powerful performance and is a highly reliable design device. Its versality enables its application in automotive applicances, key-pad illumination, hand-held devices such as PDAs, notebooks, compact back-lighting applications, consumer appliances, office equipment, audio and video equipment. Features: > > > > > > High brightness surface mount LED. Super wide viewing angle of 160°. Equivalent to 0603 package outline. Copper lead-frame construction. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc > Signage: full colour display video notice board, signage, special effect lighting. © 2005 SpiceLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 13/02/2014 V2.0 DOMINANT TM InGaN Warm White S-Spice : SSF-LLG Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number SSF-LLG-T2U-1 Color Viewing Angle˚ Warm White 160 Luminous Intensity @ IF = 20mA IV (mcd) Min. Typ. Max. 355.00 500.00 715.00 NOTE 1. All part number above comes in a quantity of 3000 units per reel. 2. Other luminious intensity groups are also available upon request 3. Luminous intensity is measured with an accuracy of ± 11%. 4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. Vf @ If = 20mA Part Number SSF-LLG Min. (V) 2.9 Typ. (V) 3.2 Vr @ Ir = 10uA Max. (V) 3.6 Min. (V) 5 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings Maximum Value Unit DC forward current 30 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 100 mA 5 V 2000 V 110 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 80 mW 215 K/W 125 K/W Reverse voltage; Ir max = 10µA ESD threshold (HBM) LED junction temperature Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounted on FR4 PCB; pad size >=16mm2 per pad) 2 13/02/2014 V2.0 DOMINANT TM InGaN Warm White S-Spice : SSF-LLG Opto Technologies Innovating Illumination Wavelength Grouping Color Structure Chromaticity coordinate groups are measured with an accuracy of ± 0.01. 1 2 3 4 0.402 0.392 0.409 0.421 Cy 0.421 0.389 0.399 0.433 Cx 0.392 0.382 0.397 0.409 Cy 0.389 0.358 0.367 0.399 Cx 0.421 0.409 0.423 0.437 Cy 0.433 0.400 0.405 0.438 Cx 0.409 0.397 0.409 0.423 Cy 0.400 0.367 0.372 0.405 Cx 0.437 0.423 0.436 0.452 Cy 0.438 0.405 0.409 0.443 Cx 0.423 0.409 0.421 0.436 Cy 0.405 0.372 0.377 0.409 Cx 0.452 0.436 0.451 0.469 Cy 0.443 0.409 0.414 0.448 Cx 0.436 0.421 0.435 0.451 Cy 0.409 0.377 0.382 0.414 Bin RA RB QA QB PA PB NA NB Cx InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. 3 13/02/2014 V2.0 DOMINANT TM Opto Technologies InGaN Warm White S-Spice : SSF-LLG Innovating Illumination Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group T2 355.0 ... 450.0 U1 450.0 ... 560.0 U2 560.0 ... 715.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Binning (Optional) Vf Bin @ 20mA Forward Voltage (V) 01 2.90 … 3.00 02 3.00 … 3.10 03 3.10 … 3.20 04 3.20 … 3.30 05 3.30 … 3.40 06 3.40 … 3.50 07 3.50 … 3.60 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf binning. 4 13/02/2014 V2.0 DOMINANT TM InGaN Warm White S-Spice : SSF-LLG Opto Technologies Innovating Illumination Forward Current Vs Forward Voltage Forward Current Vs Forward Voltage Relative Luminous Intensity Vs Forward Current 2.2 50 50 2.2 2 2 1.8 ForwardCurrent; Current;mA mA Forward Relative Intensity, Normalized at 20mA Relative Intensity; Normalized at 20mA Relative Luminous Intensity Vs Forward Current 1.8 1.6 1.6 1.4 1.4 1.2 1.2 1 1 0.8 0.8 0.6 0.6 0.4 0.4 0 0 00 10 10 20 20 30 30 40 40 20 20 10 10 0 0 50 50 2 2.5 2.5 3 3 3.5 3.5 4 ForwardCurrent, Current,mA mA Forward Forward Voltage; Forward Voltage;VV Forward Ambient Temperature MaximumCurrent ForwardVs Current Vs Temperature Relative Intensity Relative IntensityVs VsWavelength Wavelength 11 30 20 25 15 20 1015 10 5 5 0 0 4 0.9 0.9 Relative RelativeIntensity Intensity Forward Current, mA 30 30 0.2 0.2 2535 Forward Current; mA 40 40 0 0 10 10 20 20 30 30 40 40 50 50 60 60 70 70 Ambient Temperature 80 80 90 100 0.8 0.8 0.7 0.7 0.6 0.6 0.5 0.5 0.4 0.4 0.3 0.3 0.2 0.2 0.1 0.1 0 0 300 400 90 100 Ambient Temperature 450 500 500 550 700 600 650 Wavelength; nm Wavelength; nm 900 700 1100 750 Radiation Pattern 30 o 20 o 10 o 0o 1.0 40 o 50 o 60 o 70 o 80 o 90 o 0.8 0.6 0.4 0.2 0 5 13/02/2014 V2.0 DOMINANT TM InGaN Warm White S-Spice : SSF-LLG Opto Technologies Innovating Illumination SpiceLED • InGaN Warm White S-Spice : SSF-LLG Package Outlines TM Note: The center pad is a common cathode. Please take care during soldering to avoid shorting. Material Material Cu Alloy With NiPdAu Plating Lead-frame High Temperature Resistant Epoxy Resin Package Note: product is Pb free 6 13/02/2014 V2.0 DOMINANT TM InGaN Warm White S-Spice : SSF-LLG Opto Technologies Innovating Illumination Recommended Solder Pad Note: Component is based on a new package platform, which features “Bottom Only Terminations“. Solder joints are only formed at the bottom of the component and solder fillet will not be observable as the sides of the component. Surface are not intended for soldering 7 13/02/2014 V2.0 DOMINANT TM InGaN Warm White S-Spice : SSF-LLG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 3000 units. • Reel diameter is 180 mm. Current New Issue No : 1 Page 1 of 2 8 13/02/2014 V2.0 DOMINANT TM InGaN Warm White S-Spice : SSF-LLG Opto Technologies Innovating Illumination Packaging Specification 9 13/02/2014 V2.0 DOMINANT TM InGaN Warm White S-Spice : SSF-LLG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc SpiceLED 1 completed bag (3000pcs) 0.001 0.034 140 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For SpiceLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 45,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 288,000 MAX 10 13/02/2014 V2.0 DOMINANT TM InGaN Warm White S-Spice : SSF-LLG Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 13/02/2014 V2.0 DOMINANT TM InGaN Warm White S-Spice : SSF-LLG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial release 29 Oct 2013 8 Update Carrier Tape 13 Feb 2014 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 12 13/02/2014 V2.0 DOMINANT TM Opto Technologies Innovating Illumination InGaN Warm White S-Spice : SSF-LLG About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM