DOMINANT Opto Technologies Innovating Illumination Power DomiLED TM DATA SHEET: Power DomiLEDTM AlInGaP : DWx-PJG TM With its significant power in terms brightness, viewing angle and variety of application possibilities, Power DomiLED™ truly is a standout performer! Ideal for automotive interior lighting as well as home, office and industrial applications, it is also a proven performer in electronic signs and signals. Features: > > > > > > High brightness surface mount LED using thin film technology. 120° viewing angle. Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to IR reflow soldering. Environmental friendly; RoHS compliance. Applications: > Automotive: Interior applications, eg: switches, telematics, climate control system, dashboard, etc. Exterior applications, eg: signal lighting, Center High Mounted Stop Light (CHMSL) > Signage: full colour display video notice board, signage, special effect lighting. > Lighting: architecture lighting, general lighting, garden light, channel light. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 04/04/2011 V4.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Viewing Angle˚ Luminous Intensity @ IF = 50mA Min. Typ. Max. Flux @ IF=50mA,mlm Typ. 120 1400.0 2125.0 2850.0 5750.0 Red, 620nm 120 2240.0 2850.0 3550.0 7700.0 DWA-PJG-X2Y-1 Amber, 617nm 120 2240.0 3550.0 4500.0 9600.0 DWY-PJG-X2Y-1 Yellow, 589nm 120 2240.0 3550.0 4500.0 9600.0 DWS-PJG-W2X-1 Super Red, 632nm DWR-PJG-X2Y1-1 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. An optional Vf bining is also available upon request. Bining scheme is as per following table. Electrical Characteristics at Tj=25˚C Vf @ If = 50mA Part Number Min. (V) Typ. (V) Max. (V) Vr @ Ir = 10uA Min. (V) DWx-PJG 1.90 2.20 2.65 12 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. 2 04/04/2011 V4.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Absolute Maximum Ratings Maximum Value Unit DC forward current 70 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1) 100 mA Reverse voltage 12 V ESD threshold (HBM) 2 kV 125 ˚C Operating temperature -40 … +110 ˚C Storage temperature -40 … +125 ˚C 200 mW 300 K/W 130 K/W LED junction temperature Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) Characteristics Symbol Temperature coefficient of O dom (typ) IF = 50mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of VF (typ) IF = 50mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of IV (typ) TC O Part Number dom (typ) TCV TCIV IF = 50mA; 0 ˚C <= T <= 100 ˚C 3 Value DWS-PJG 0.04 DWR-PJG 0.05 DWA-PJG 0.06 DWY-PJG 0.08 DWS-PJG DWR-PJG -2.2 -2.2 DWA-PJG -2.0 DWY-PJG -1.9 DWS-PJG -0.4 DWR-PJG -0.5 DWA-PJG -0.7 DWY-PJG -0.9 Unit nm / K mV / K %/K 04/04/2011 V4.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Wavelength Grouping at Tj= 25˚C Color Group Wavelength distribution (nm) DWS, Super Red Full 625 - 640 DWR; Red Full 620 - 630 DWA; Amber Full 610 - 621 W 610 - 615 X 615 - 621 Full 585 - 594 X 585 - 588 Y 588 - 591 Z 591 - 594 DWY; Yellow Dominant wavelength is measured with an accuracy of ± 1 nm at a drive current of 50mA Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group W2 1400.0...1800.0 X1 1800.0...2240.0 X2 2240.0...2850.0 Y1 2850.0...3550.0 Y2 3550.0...4500.0 Luminous intensity is measured with an accuracy of ± 11%. Vf Bining (Optional) Vf @ If = 50mA Forward Voltage (V) 50 1.9 ... 2.05 51 2.05 ... 2.20 52 2.20 ... 2.35 53 2.35 ... 2.50 54 2.50 ... 2.65 Forward voltage, Vf is measured with an accuracy of ± 0.1V. Please consult sales and marketing for special part number to incorporate Vf binning. 4 04/04/2011 V4.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Forward Current Forward Voltage Forward Current vsvs Forward Voltage 1.2 1.2 7070 1 1 60 60 Forward Current; mA Forward Current; mA Relative Intensity;Normalized Normalizedatat50mA 50mA Relative Intensity; Relative Vs Forward Forward Current Current Relative Intensity Intensity Vs 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0 0 0 0 10 10 20 20 30 30 40 40 50 50 60 60 Forward Current, mA Forward Current, mA 70 70 50 50 40 40 30 30 20 20 10 10 0 80 80 Maximum Current Vs Ambient Temperature Maximum Current Vs Ambient Temperature 1.8 1.8 Relative Intensity Relative Intensity 70 60 60 50 50 40 40 30 30 20 20 10 0 10 0 0 2 2 2.1 2.2 2.3 2.1 2.2 2.3 Forward Voltage; V Forward Voltage; V Relative Intensity Vs Wavelength Multiple X-Y Relative Intensity Vs Plot Wavelength Variables 10 20 30 40 50 60 70 80 10 20Ambient 30 40 Temperature 50 60 70 80 90 100 0.7 0.8 0.8 Yellow 0.6 0.7 0.7 90 100 Ambe Super Red Red 0.4 0.5 0.5 0.3 0.4 0.4 00 Red Red 0.5 0.6 0.6 0.2 0.3 0.3 0.1 0.2 0.2 0.1 0 0.1 Super Amber Amber 500 500 450 550 550 550 600 650 700 Wavelength; 600 650 650 nm 700 750 750 750850 Wavelength; nm Wavelength Ambient Temperature Radiation Pattern Allowable Forward Current Vs Duty ratio 30° 1000 Allowable Forward Current; mA 1.9 1.9 10.9 1 0.9 0.9 0.8 Yellow 80 70 Forward Current, Forward Current, mAmA 1.7 1.7 1 80 0 0 20° 10° 0° 1.0 40° 0.8 100 10 50° 0.6 60° 0.4 70° 0.2 80° 1 1 10 90° 100 0 Duty Ratio, % 5 04/04/2011 V4.0 Yellow DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination DomiLED • AllnGap : DWx-PJG Package Outlines TM Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone resin Soldering Leads Sn Plating 6 04/04/2011 V4.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Recommended Solder Pad 7 04/04/2011 V4.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 8 04/04/2011 V4.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Packaging Specification 9 04/04/2011 V4.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Packaging Specification Moisture sensitivity level Barcode label DOMINANT ROHS Compliant LOT NO : lotno PB Free PART NO : partno QTY : product quantity per reel S/N : serial no D/C: date code GROUP : group Reel Label Moisture absorbent material + Moisture indicator The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc Power DomiLED 1 completed bag (2000pcs) 0.034 0.034 190 ± 10 190 10 Weight Weight(gram) (gram) Cardboard Box DOMINANT TM For Power DomiLED Cardboard Box Size TM Dimensions (mm) Empty Box Weight (kg) Reel / Box Quantity / Box (pcs) Small 300 x 250 x 250 0.58 15 reels MAX 30,000 MAX Large 416 x 516 x 476 1.74 96 reels MAX 192,000 MAX 10 04/04/2011 V4.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Recommended Sn-Pb IR-Reflow Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 275 235-240˚C 10-30s 250 225 Temperature (˚C) 200 Ramp-up 3˚C/sec max. 183˚C 175 60-150s 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-120s 50 360s max 25 0 50 100 150 200 Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 225 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 11 04/04/2011 V4.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial release 06 Oct 2010 3 Add thermal resistance and charactheristics 11 Feb 2011 2, 5 2 Add Typical Total Flux Value Add graph “Allowable Forward Current vs Duty Ratio” Update Operating Temperature Add part no: DWS-PJG-W2X-1 09 Mar 2011 04 Apr 2011 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 12 04/04/2011 V4.0 DOMINANT TM AlInGaP : DWx-PJG Opto Technologies Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: Head Quarter DOMINANT Opto Technologies Sdn. Bhd. Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia Tel: (606) 283 3566 Fax: (606) 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Sdn. Bhd. Shanghai Representative Office Rm 1007, DaZhong Building, No. 1515 Zhong Shan (W) Rd, Shanghai, China 200235 Tel: +86 21 6428 6428 Fax: +86 21 6428 6880 E-mail: [email protected] DOMINANT Korea Sales Office DOMINANT Semiconductors Korea Inc. RM 211 SUNTEAK CITY APT. 513-15 Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-725, Korea Tel: +82-31-701-5203 Fax: +82-31-701-5204 E-mail: [email protected] DOMINANT U.S.A Sales Office 25 Rockaway Road, 08833 Lebanon, New Jersey, USA Tel: (908) 439-9930 Cell: (908) 343-5810 Fax: (908) 439-9929 E-mail: [email protected] DOMINANT Europe Sales Office DOMINANT Semiconductors Europe GmbH Raiffeisenstr. 38, 74906 Bad Rappenau Germany Tel: +49 (0) 7264-89010-10 / +49 (0) 7264-89010-11 Cell: +49 173-6907370 / +49 173-6907751 Fax: +49 (0) 7264-89010-29 E-mail: [email protected]; [email protected] DOMINANT India Sales Office C-11,Vasanth Business Centre #86, TTK Road, Alwarpet Chennai - 600 018, INDIA Tel: 91-44-42030616 / 516 Cell: 91-9444920537 Fax: 91-9444920616 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM