Printheads Compact low speed thick film thermal printhead (8 dots / mm) KF2002-GK10A The KF2002-GK10A uses a highly-durable conductive protective film to handle label papers with top-coatings. With ROHM’s partial glaze construction, the KF2002-GK10A is a compact and lightweight thick-film thermal print head with printing speeds up to 3 inch / second. Applications POS terminals Label printers CAT terminals Multi-purpose small-sized printers Features 1) The use of the newly developed highly-durable conductive protective film has improved countermeasures against static electricity (ESD). 2) Acheives an even smaller size and lighter weight by ROHM’s original clip connector design and newly developed FFC (full flat cable) specifications. 3) A newly developed 144-bit IC levels the strobe partition and reduces the noise level. 4) One rank resistance value of 1500 Ω ± 3% eliminates the inconvenience of rank selection. 5) 2-inch, 3-inch, 4-inch, and 8-inch series are available. External dimensions (Units: mm) 1 Printheads Equivalent circuit Pin assignments 2 KF2002-GK10A Printheads KF2002-GK10A Timing chart Characteristics 3 Printheads Electrical characteristic curves 4 KF2002-GK10A