EURO QUARTZ EM32S TCXO 3.2 x 2.5 x 1.3mm SMD Clipped Sinewave 16MHz to 40MHz Ultra-miniature seam sealed SMD 3.2 x 2.5 x 1.3mm Stability from ±1ppm over -30° to +75°C Supply Voltage from 2.3 Volts to 5.5 Volts Produced as TCXO or VCTCXO with EFC Readily customized EM32S - OUTLINES AND DIMENSIONS DESCRIPTION EM32 series TCXOs are ceramic SMD TCXOs packaged in an industrystandard, ultra-miniature 3.2 x 2.5mm package. The TCXO supply voltage may be chosen from 2.3 to 5.5 Volts. Close tolerances from ±1ppm over -30° to +75°C are available. The part can be produced as either a standard TCXO or a voltage-controlled TCXO(VCTCXO) SPECIFICATION Product Series Code TCXO: VCTCXO: Frequency Range: Output Waveform: Initial Calibration Tolerance**: Operating Temperature Range: Frequency Stability vs. Ageing: vs. Voltage Change: vs. Load Change: vs. Reflow: Current Consumption: 9.6 to 15MHz: 15.01 to 26.0MHz: 26.01 to 40MHz: Supply Voltage: EM32S VEM32S 10.0MHz to 40.0MHz* Clipped Sinewave <±1ppm at 25°C ±1.0 ppm max. first year ±0.3 ppm max. ±5% change ±0.3 ppm max. ±10% change ±1ppm max. for one reflow (Measured after 24 hours) 1.5mA 2.0mA 2.5mA +2.8, +3.0 or +5.0Volts ( 0.8V p-p minimum 10 ns max. 2ms typical, 5ms max. 10kΩ//10pF ±10% -10dB typical, -7dB max. Output Voltage Level: Rise/Fall Time: Start-up Time: Output Load: Harmonic Distortion: SSB Phase Noise: Output Format: VEM32S VOLTAGE CONTROL SPECIFICATION DC coupled. Storage Temperature: Control Voltage: Standard = +1.5±1.0Volts for all input voltages. Frequency Deviation: Slope Polarity: ±5.0 ppm min. Positive Input Impedance: 1.0M min. Modulation Bandwidth: 3.0kHz min. measured at -3dB Linearity: 10% max. -50° to +100°C PART NUMBERING PROCEDURE Example: FREQUENCY STABILITY Frequency Stability (ppm) Temp. Range (°C) P ±0.5 ±1.0 ±1.5 ±2.0 ±2.5 ±3.0 ±5.0 0 ~ +50 P P P P P P P -10 ~ +60 ASK P P P P P P -20 ~ +70 x P P P P P P -30 ~ +75 x P P P PP P P -40 ~ +85 x P P P P P P EM32S 3 - 40.00 - 2.5/-30+75 Series Description TCXO = EM32S VCTCXO = VEM32S Supply Voltage 28 = 2.8 VDC 3 = 3.0 VDC 5 = 5.0 VDC Frequency (MHz) Stability over OTR (±ppm) Operating Temperature Range (OTR) (°C) = available, x = not available, ASK = call Technical Sales PHASE NOISE SSB Phase Noise at 25°C Offset (Hz) 10 100 1k 10k 100k EM32S 10MHz (dBc/Hz) -80 -115 -135 -138 -142 1M 10M -148 -150 EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk