EURO QUARTZ EQXOP-1000 Programmable Oscillators 14 pin Dual-in Line Freq: 1.0MHz to 133.0MHz Features Very quick delivery Industry-standard 14 pin DIL package Supply Voltage 2.7V, 3.3V or 5.0Volts Enable/Disable or Power Down options OUTLINE & DIMENSIONS Description EQXOP-1000 programmable oscillators provide custom frequency and specification oscillators with a very quick delivery time. Jitter, general performance and specification is comparable to discrete frequency oscillators. Operating Load Conditions Maximum Capacitive Load TTL 5.0 Volt Supply 1.0MHz to 40MHz: 40.0MHz ~ 133MHz: Electrical Specification Frequency Range: Frequency stability: Operating Temperature Range: 0° ~ +70°C -20° ~ +70°C -40° ~ +85°C Storage Temperature Range: Ageing: Packaging: Output Levels: Maximum Output Loads: 1.000MHz ~ 133.0MHz from ±25ppm to ±100ppm Part Code 'C' Part Code 'D' Part Code 'I' -55° ~ +125°C ±5ppm per year max. Bulk packed or Tubed CMOS or TTL Below 40MHz: 30pF Above 40MHz: 15pF (See note opposite) Duty Cycle: Below 40MHz: 45/55% min. Above 40MHz: 40/60% min. Rise/Fall Times: 4ns max. Supply Current: 25mA (unloaded) Standby Current: 10µA typical, 50µA max. Start-up Time: 10ms max. Power Down and Disable Delay Time Synchronous: T/2ns typical, T +10ns typical Asynchronous: 10ns typical, 15ns maximum (T - frequency period) Output Enable Time: 100ns maximum RMS Jitter: 1MHz ~ 33MHz: 50ps maximum 33MHz ~ 133MHz: 40ps maximum 50pF 25pF Maximum Capacitive Load CMOS 5.0 Volt Supply 1.0MHz to 66MHz: 50pF 66.1MHz to 133MHz: 25pF 3.3 Volt/2.7 Volt Supply 1.0MHz to 40MHz: 30pF 40.0MHz to 100MHz: 15pF Model Selection Guide Part Number Example: 24.890MHz EQXOP-1100UCTA (see Part Numbers table) 24.890MHz EQXOP-1100 U C T A Frequency Series Designation EQXOP-1*** Stability over Temp. 100 = ±100ppm 050 = ±50ppm 025 = ±25ppm Part Numbers Supply Voltage Blank = 5.0 Volts ±5% A = +3.3 Volts ±5% B = +2.7 Volts ±5% Output Option T = Enable/Disable or P = Power Down U = CMOS/TTL Output Operating Temp. Range C = 0° ~ +70°C D = -20° ~ +70°C I = -40° ~+85°C Synchronous/Asynchronous By default, Euroquartz produce Enable/Disable and Power Down function oscillators as ASYNCHRONOUS. If SYNCHRONOUS operation is required (see above specification for details,) append 'SYNC' to part number. Model Number EQXOPL-1100UC EQXOPL-1050UC EQXOPL-1025UC EQXOPL-1100UD EQXOPL-1050UD EQXOPL-1025UD EQXOPL-1100UI EQXOPL-1050UI EQXOPL-1025UI Stability Operating Temperature Range ±100 ±50 ±25 ±100 ±50 ±25 ±100 ±50 ±25 0° ~ +70°C 0° ~ +70°C 0° ~ +70°C -20° ~ +70°C -20° ~ +70°C -20° ~ +70°C -40° ~ +85°C -40° ~ +85°C -40° ~ +85°C EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 Email: [email protected] www.euroquartz.co.uk