Data Sheet - Euroquartz

EURO QUARTZ
T1300 Series TCXO
10.0MHz to 50.0MHz
Ultra-low Acceleration Sensitivity
Low Phase Noise performance
Ultra-low Acceleration Sensitivity
Frequency Range: 10 - 50 MHz
Output Signal: CMOS
Industry-standard dual-in-line package
DESCRIPTION
OUTLINES AND DIMENSIONS
T1300 series TCXOs are standard-packaged parts providing ultra-low
acceleration sensitivity performance with close tolerance temperature
stability. The part provides stability of ±2x10-6ppm over -40° to
+85°C.
GENERAL SPECIFICATION
Frequency Range:
Output:
Symmetry:
Load:
Temperature Stability:
Frequency vs. Supply V:
Frequency vs. Load:
Short Term Variation:
Ageing:
Input Voltage:
Input Current:
Warm-up Time:
G-Sensitivity:
Frequency Adjust:
10.0MHz to 50.0MHz
CMOS Square wave
50%±10%
15pF/10kΩ
±2x10-6 over -40° to +85°C
±1x10-7 for a 5% change
±1x10-7 for a 10% change
±2x10-10 typical for 1 sec. Tau (10MHz)
±0.5ppm /year after 14 days operation
+5.0VDC or +3.3VDC ±5%
15mA max.
to within ±1ppm in 10ms.
<5x10-11/g, total gamma
±6.0ppm typical, positive slope
0 to Vcc EFC, 50kΩ input Z.
PART NUMBERING
PHASE NOISE
(At 10MHz +5V, Typical)
Example:
Offset
dBc/Hz
10Hz
-95
100Hz
-125
1kHz
-155
10kHz
-162
100kHz
-162
T1300-3.3V-10.0MHz
T1300 - 3.3V
- 10.0MHz
Model number - Input Voltage - Frequency
EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE
Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk