EURO QUARTZ MP24, MP25 CRYSTALS 11.4 x 5.0mm SMD Crystal 3.2MHz to 70MHz FEATURES Frequency range 3.20MHz to 70.0MHZ Fully RoHS compliant Two height profiles available, 4.8 or 3.8mm Standard EIA tape and reel supply DESCRIPTION OUTLINE & DIMENSIONS MP24 and MP25 crystals provide an ideal source of low frequency clock signals (from 3.5MHz) in a low-profile SMD package. The part is electrically and mechanically compatible with traditional industry SMD packages and may be used as a 'drop-in' replacement. USE WITH DOUBLE-SIDED PCBs MP24 and MP25 crystals are designed for top board assembly and one solder reflow process. Do not reflow this part with the can inverted. SPECIFICATION Frequency Range AT-Cut Fundamental: AT-Cut 3rd Overtone: BT-Cut Fundamental: Calibration Tolerance at 25ºC*: Frequency stability AT-Cut from: BT-Cut from: Storage Temperature: Equivalent Series Resistance: Shunt Capacitance (C0): Load Capacitance (CL): Ageing: Drive level: Reflow Soldering: Packaging: 3.20MHz to 48.0MHz 27.0MHz to 70.0MHz 24.0MHz to 48.0MHz from ±10ppm at 25°C (±30ppm standard) ±10ppm over-10° to +60°C ±50ppm over -10° to +60°C -50°~+105°C See table 7pF maximum Series or from 8pF to 32pF (Customer specified CL) <±3ppm per year at +25°C 100µW typical, 500µW maximum 10s maximum at 260°C twice or 180s at 230°C, once. 24mm EIA tape and reel, 1k per. PART NUMBER GENERATION EQUIVALENT SERIES RESISTANCE Frequency Range MHz ESR Ohms Max. AT-Cut Fundamental 3.2~3.4 3.5~6.0 6.1~10.0 10.1~48.0 300 120 60 40 Part numbers for MP24/25 crystals are generated as follows: Frequency Range MHz ESR Ohms Max. AT-Cut 3rd Overtone 27.0~30.0 30.1~50.0 50.1~70.0 150 100 80 Frequency Range MHz ESR Ohms Max. BT-Cut Fundamental 24.0~48.0 40 Example: 3.6864MHz MP24 30/50/-10+60/12pF 50R Nominal Frequency Package MP24 or MP25 Calibration tolerance at 25°C (±ppm) Temperature Stability over temp. range (±ppm) Operating Temp. Range (°C) (Lower and upper limits) Load Capacitance (Either SR for series or CL in pF) Equivalent Series Resistance (Optional - use when special value is required) EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 [email protected] www.euroquartz.co.uk