PHOTOCOUPLER PS2832-1,-4,PS2833-1,-4 HIGH COLLECTOR TO EMITTER VOLTAGE 4, 16-PIN SOP PHOTOCOUPLER −NEPOC Series− DESCRIPTION The PS2832-1, -4 and PS2833-1, -4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon darlington-connected phototransistor. The package is an SOP (Small Outline Package) type for high density mounting applications. FEATURES • High collector to emitter voltage (VCEO = 300 V: PS2832-1, -4) (VCEO = 350 V: PS2833-1, -4) • Small and thin package (4, 16-pin SOP, Pin pitch 1.27 mm) • High isolation voltage (BV = 2 500 Vr.m.s.) • High current transfer ratio (CTR = 2 000 % TYP.) • Ordering number of tape product: PS2832-1-F3, F4, PS2832-4-F3, F4 PS2833-1-F3, F4, PS2833-4-F3, F4 • Safety standards: PS2832-1, -4 • UL approved: File No. E72422 (S) • BSI approved: No. 8315, 8316 • VDE0884 approved (Option) PS2833-1, -4 • UL approved: File No. E72422 (S) APPLICATIONS • Hybrid IC • Telephone/Telegraph Receiver • FAX Document No. PN10257EJ01V0DS (1st edition) (Previous No. P14023EJ3V0DS00) Date Published February 2003 CP(K) The mark shows major revised points. PS2832-1,-4,PS2833-1,-4 PACKAGE DIMENSIONS (UNIT: mm) PS2832-1 PS2833-1 2.7±0.3 4 3 PS2832-4 PS2833-4 4 3 1 2 1 8 0.15 +0.10 –0.05 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. Anode Cathode Emitter Collector 7.0±0.3 4.4 0.5±0.3 0.1±0.1 1.27 0.12 M 2.0 +0.3 –0.2 0.15 +0.10 –0.05 2.0±0.1 1 2 3 4 5 6 7 8 7.0±0.3 4.4 0.5±0.3 0.4±0.1 16 15 14 13 12 11 10 9 9 2 1. Anode 2. Cathode 3. Emitter 4. Collector 0.1±0.1 1 10.3±0.3 16 1.27 0.40 +0.10 –0.05 0.12 M MARKING PS2832-4 PS2833-4 PS2832-1 PS2833-1 32 003 PS2832-4 N 003 Assembly Lot Last number of type No. : 32/33 No. 1 pin Mark N 0 03 0 03 Week Assembled Year Assembled (Last 1 Digit) CTR Rank Code Week Assembled Year Assembled (Last 1 Digit) 2 Country Assembled Type Number Assembly Lot Data Sheet PN10257EJ01V0DS PS2832-1,-4,PS2833-1,-4 ORDERING INFORMATION (Solder Contains Lead) Part Number PS2832-1 Package 4-pin SOP PS2832-1-F3 Packing Style Safety Standards Approval 50 pcs (Tape 50 pcs cut) Approved products Embossed Tape 3 500 pcs/reel other than VDE Application Part *1 Number PS2832-1 PS2832-1-F4 PS2832-4 16-pin SOP PS2832-4-F3 Magazine Case 45 pcs PS2832-4 Embossed Tape 2 500 pcs/reel PS2832-4-F4 PS2832-1-V 4-pin SOP PS2832-1-V-F3 50 pcs (Tape 50 pcs cut) VDE0884 approved Embossed Tape 3 500 pcs/reel (Option) PS2832-1 PS2832-1-V-F4 PS2832-4-V 16-pin SOP PS2832-4-V-F3 Magazine Case 45 pcs PS2832-4 Embossed Tape 2 500 pcs/reel PS2832-4-V-F4 PS2833-1 4-pin SOP PS2833-1-F3 50 pcs (Tape 50 pcs cut) Approved products Embossed Tape 3 500 pcs/reel other than VDE PS2833-1 PS2833-1-F4 PS2833-4 PS2833-4-F3 16-pin SOP Magazine Case 45 pcs PS2833-4 Embossed Tape 2 500 pcs/reel PS2833-4-F4 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10257EJ01V0DS 3 PS2832-1,-4,PS2833-1,-4 ORDERING INFORMATION (Pb-Free) Part Number PS2832-1-A Package 4-pin SOP PS2832-1-F3-A Packing Style Safety Standards Approval 50 pcs (Tape 50 pcs cut) Approved products Embossed Tape 3 500 pcs/reel other than VDE Application Part *1 Number PS2832-1 PS2832-1-F4-A PS2832-4-A 16-pin SOP PS2832-4-F3-A Magazine Case 45 pcs PS2832-4 Embossed Tape 2 500 pcs/reel PS2832-4-F4-A PS2832-1-V-A 4-pin SOP PS2832-1-V-F3-A 50 pcs (Tape 50 pcs cut) VDE0884 approved Embossed Tape 3 500 pcs/reel (Option) PS2832-1 PS2832-1-V-F4-A PS2832-4-V-A 16-pin SOP PS2832-4-V-F3-A Magazine Case 45 pcs PS2832-4 Embossed Tape 2 500 pcs/reel PS2832-4-V-F4-A PS2833-1-A 4-pin SOP PS2833-1-F3-A 50 pcs (Tape 50 pcs cut) Approved products Embossed Tape 3 500 pcs/reel other than VDE PS2833-1 PS2833-1-F4-A PS2833-4-A PS2833-4-F3-A 16-pin SOP Magazine Case 45 pcs Embossed Tape 2 500 pcs/reel PS2833-4-F4-A *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10257EJ01V0DS PS2833-4 PS2832-1,-4,PS2833-1,-4 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) Ratings Parameter Symbol Unit PS2832-1 Diode PS2832-4 PS2833-4 Forward Current (DC) IF 50 mA Reverse Voltage VR 6 V Power Dissipation Derating Power Dissipation Peak Forward Current Transistor PS2833-1 *1 ∆PD/°C 0.6 0.8 mW/°C PD 60 80 mW/ch IFP 1 Collector to Emitter Voltage VCEO Emitter to Collector Voltage VECO 0.3 V IC 60 mA/ch ∆PC/°C 1.2 mW/°C PC 120 mW/ch BV 2 500 Vr.m.s. Operating Ambient Temperature TA −55 to +100 °C Storage Temperature Tstg −55 to +150 °C Collector Current Power Dissipation Derating Power Dissipation Isolation Voltage *2 300 350 A 300 350 V *1 PW = 100 µs, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output Data Sheet PN10257EJ01V0DS 5 PS2832-1,-4,PS2833-1,-4 ELECTRICAL CHARACTERISTICS (TA = 25 °C) Parameter Diode Transistor Symbol Conditions Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Terminal Capacitance Ct V = 0 V, f = 1 MHz Collector to Emitter Dark ICEO IF = 0 mA, VCE = 300 V CTR IF = 1 mA, VCE = 2 V VCE (sat) IF = 1 mA, IC = 2 mA MIN. TYP. MAX. Unit 1.2 1.4 V 5 µA 15 pF 400 nA 4 500 % 1.0 V Current Coupled Current Transfer Ratio 400 2 000 (IC/IF) Collector Saturation Voltage RI-O VI-O = 1 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.4 pF VCC = 5 V, IC = 10 mA, RL = 100 Ω 20 µs Rise Time *1 Fall Time tr tf 5 *1 Test circuit for switching time VCC Pulse Input PW = 1 ms Duty cycle = 1/10 IF In monitor VOUT 50 Ω 6 Ω Isolation Resistance *1 10 11 RL = 100 Ω Data Sheet PN10257EJ01V0DS PS2832-1,-4,PS2833-1,-4 TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 0.8 mW/˚C 60 PS2832-1 PS2833-1 40 0.6 mW/˚C 20 0 25 100 75 50 120 100 80 PS2832-1, -4 PS2833-1, -4 60 1.2 mW/˚C 40 20 25 0 100 75 50 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD CURRENT vs. FORWARD VOLTAGE COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 100 TA = +100 ˚C +60 ˚C +25 ˚C 50 Forward Current IF (mA) Transistor Power Dissipation PC (mW) PS2832-4 PS2833-4 80 Collector Current IC (mA) Diode Power Dissipation PD (mW) 100 10 5 0 ˚C –25 ˚C –50 ˚C 1 0.5 5 mA 3 mA 2 mA 50 1 mA 10 5 IF = 0.5 mA 0.1 Collector to Emitter Dark Current ICEO (nA) 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1 0.4 1.5 0.6 0.8 1.0 1.2 1.4 1.6 Forward Voltage VF (V) Collector Saturation Voltage VCE (sat) (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 100 100 000 VCEO = 300 V Collector Current IC (mA) 10 000 CTR = 1 068 % 2 290 % 4 360 % 1 000 100 10 1 –50 –25 3 mA 5 mA 0 25 50 75 100 2 mA 50 1 mA 10 5 IF = 0.5 mA 1 0 1 2 3 4 5 Collector to Emitter Voltage VCE (V) Ambient Temperature TA (˚C) Data Sheet PN10257EJ01V0DS 7 ; ; CURRENT TRANSFER RATIO vs. FORWARD CURRENT NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE 1.4 4 500 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25 ˚C, IF = 1 mA, VCE = 2 V 0.2 0.0 –50 –25 0 25 75 50 Current Transfer Ratio CTR (%) Normalized Current Transfer Ratio CTR PS2832-1,-4,PS2833-1,-4 VCE = 2 V 4 000 3 500 3 000 Sample A B C 2 500 2 000 1 500 1 000 500 0 0.1 100 0.5 10 40 LONG TERM CTR DEGRADATION 1 000 1.2 VCC = 10 V, IC = 10 mA, CTR = 2 300 % IF = 1 mA TA = 25 ˚C 1.0 100 tr tf td 10 ts 1 CTR (Relative Value) Switching Time t (µ s) 5 Forward Current IF (mA) Ambient Temperature TA (˚C) SWITCHING TIME vs. LOAD RESISTANCE 1 0.8 60 ˚C 0.6 0.4 0.2 0.1 10 50 100 500 1000 0.0 10 Load Resistance RL (Ω) Remark The graphs indicate nominal characteristics. 8 Data Sheet PN10257EJ01V0DS 102 103 104 Time (Hr) 105 106 PS2832-1,-4,PS2833-1,-4 TAPING SPECIFICATIONS (UNIT: mm) φ 1.5+0.1 –0 7.5±0.1 4.0±0.1 16.0±0.3 2.0±0.1 7.55±0.1 1.75±0.1 Outline and Dimensions (Tape) 2.8 MAX. 0.3 1.55±0.1 2.3±0.1 2.85±0.1 4.0±0.1 Tape Direction 003 003 32 32 003 32 32 003 003 003 003 003 32 32 32 32 32 32 003 PS2832-1-F4 PS2833-1-F4 003 PS2832-1-F3 PS2833-1-F3 Outline and Dimensions (Reel) R 1.0 φ 21.0±0.8 φ 100±1.0 2.0±0.5 φ13.0±0.2 φ 330±2.0 2.0±0.5 17.5±1.0 21.5±1.0 Packing: 3 500 pcs/reel Data Sheet PN10257EJ01V0DS 15.9 to 19.4 Outer edge of flange 9 PS2832-1,-4,PS2833-1,-4 2.8 MAX. 10.7±0.1 7.5±0.1 φ 1.5+0.1 –0 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 0.3 2.3±0.1 8.3±0.1 1.55±0.1 12.0±0.1 Tape Direction PS2832-4-F3 PS2833-4-F3 PS2832-4-F4 PS2833-4-F4 Outline and Dimensions (Reel) R 1.0 φ 21.0±0.8 φ 100±1.0 2.0±0.5 φ13.0±0.2 φ 330±2.0 2.0±0.5 17.5±1.0 21.5±1.0 Packing: 2 500 pcs/reel 10 Data Sheet PN10257EJ01V0DS 15.9 to 19.4 Outer edge of flange PS2832-1,-4,PS2833-1,-4 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings. Data Sheet PN10257EJ01V0DS 11 PS2832-1,-4,PS2833-1,-4 USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 12 Data Sheet PN10257EJ01V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.