FUSEHOLDER FUSED TERMINAL BLOCK 1 - 5 Pole terminal strip with 5x20mm fuse holder to IEC257 Wire protector on fuse pole as standard Anti - rotation spigot Standard 3 to 5 pole with earth screw, without wire protection IP20 finger protection Meets creepage and clearance requirements of IEC Cable entry 4mm2 (2.5mm2 with wire protector) SPECIFICATION Voltage rating: Current rating: Working fuse holder 250VAC, terminal 450VAC fuse holder 13A, terminal 13A Temperature: Moulding: Terminal: 125°C (short period: 170°C) UL94-V0 flame retardant polyamide 66 Brass Nickel plated Fuse clip: Fuse holder: Screws: Phosphor bronze 5 x 20mm M3 7 microns zinc, colour passivated and tropicalised IMQ, Semko, Fimko UL, VDE, CSA Approvals: OUTLINE DRAWING SECTION 13 28 Earth screw M3 13.2 20 15mm Spigot to earth 6 10 28 10 20 ø3.3 50.5 21.5 ORDERING INFORMATION DBC FH 1 /3 Dubilier Connectors Series Style Nº of Ways Fuse Holder 1 3=3way 4=4way 5=5way 299 www.dubilier.co.uk FUSEHOLDER FUSED TERMINAL BLOCK Accepts 5x20 & 6.3x25mm fuses Supplied with warth screw & washer IEC257 approved UL/ CSA approved IP20 finger protection Anti rotation spigot Cable entry 10mm2 SPECIFICATION Rating: Current rating: Working temperature: Moulding: Terminal: Fuse clip: Screws: Approvals: Terminal marking: Fuse holder 250Vac, terminal 450Vac Fuse holder 13Amp, terminal 20Amp -20°C to 125°C UL94V-0 flame retardant PA66 Brass, nickel plated Phosphor bronze M3.5 steel, 6 µ zinc colour passivated and tropicalised CE L=live/ (earth sign)=Earth/N=neutral OUTLINE DRAWING SECTION 13 18.85 28.30 16.00 22.89 24.64 Ø 3.5 2.26 11.57 27.40 11.30 ORDERING INFORMATION DBC FH 1A /2 Dubilier Connectors Series Style Nº of Ways Fuseholder 2 = 2 ways 3 = 3 ways * Other Number of ways are available up to 12 Please consult office for further details 300 www.dubilier.co.uk 24.30