TERMINAL BLOCKS 3.81MM PITCH ULTRA LOW PROFILE 3.81mm Pitch 0.75mm2 wire acceptance Professional rising clamp UL/CE approved 2 - 12 pole interlocking Colour green SPECIFICATION Electrical Characteristics Moulding: UL94-V0 flame retardant PA66 Rating Current: 9A/130Vac Pin/terminal: 5µ tinned, nickel plated brass Contact Resistance: 1.5kV/60sec Rising clamp: Nickel Plated brass Insulation Resistance: ≥ 5MΩ Screw/torque: M2 steel, 6µ zinc colour passivated and tropicalised/0.3Nm Operating Temperature: -20°C to +125°C Short Period: Recommended PCB hole size: 160°C OUTLINE DRAWING 11.43 ORDERING INFORMATION 7.62 DBC TB 40 /2 Dubilier Connectors Series Style No of Ways 2.1 7.3 9.1 3.5 0.9 1.65 ø1.1mm Terminal Blocks 2 = 2ways 3 = 3ways 0.5 3.81 * other number of ways are available Please consult the office for further details 3.5 3.81 T•P T•P DU RO C NEW TERMINAL BLOCKS 3.81mm PITCH 90° MOUNT DU RO C 3.81mm Pitch UL/ CSA approved Ultra Low Profile Interlocking Flame Retardant Material Professional rising clamp 0.75mm2 wire acceptance SPECIFICATION Rating: Dielectric Strength: Insulation Resistance: Working temperature: Short Period: Moulding: Pin/terminal: Wire protector: Screw/torque: 9A/130V 1.5KV/60sec ≥5MΩ -20°C to 125°C 160° UL94V-0 flame retardant PA66 Recommended PCB hole size: ORDERING INFORMATION 0.5 8.35 ø1.1mm DBC TB 83 /2 Dubilier Connectors Series Style Nº of Ways Terminal Block 2 = 2 ways 3 = 3 ways * Other Number of ways are available up to 12 Please consult office for further details 3.5 369 www.dubilier.co.uk SECTION 18 OUTLINE DRAWING 0.75 5µ tinned, nickel plated brass Nickel plated brass M2 steel, 6µ zinc colour passivated and tropicalised/0.3Nm T•P T•P DU RO C NEW TERMINAL BLOCKS 3.81mm PITCH PLUG IN DU RO C 3.81mm Pitch UL/ CE approved Flame Retardant Material Closed end headers 1mm2 wire acceptance Professional rising clamp SPECIFICATION Rating: Dielectric Strength: Insulation Resistance: Working temperature: Short Period: Moulding: Pin/terminal: Rising clamp: Screw/torque: 9A/130V ≥1.25KV/60sec ≥5MΩ -20°C to 125°C 160° UL94V-0 flame retardant PA66 5µ tinned, phosphor bronze 5µ Nickel copper flash brass M2 steel, 6µ zinc, colour passivated and tropicalised/0.4Nm Recommended PCB hole size: ø1.0mm OUTLINE DRAWING 6.6 7.5 1.4 3.5 2.3 DBCTB60 6.4 15.5 2.75 11.1 1.7 2.3 6.6 3.5 3.5 2.6 9.2 2.6 3.5 3.4 7.25 3 0.8 DBCTB61 0.8 8 3.5 0.8 2.6 2.6 3.5 3 7.25 0.8 DBCTB68 3.4 ORDERING INFORMATION SECTION 18 DBC TB 60 /2 Dubilier Connectors Series Style Nº of Ways Terminal Block 60=Style 60 68=Style 68 61=Style 61 2 = 2 ways 3 = 3 ways * Other Number of ways are available up to 12 Please consult office for further details 370 www.dubilier.co.uk 9.2