Surge arrester 2-electrode arrester Series/Type: Ordering code: EF470X B88069X5080**** Version/Date: Version: Issue 06 / 2013-09-16 6 Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white" (or invisible). This ensures that the table disappears for the customer PDF. To update the data sheet, click on the symbol "Preview" and then "Close". Please do not alter the header or footer when copying the content. Identification/Classification 1: (header 1 + top left header bar) Surge arrester Identification/Classification 2: (header 2 + bottom left header bar) 2-electrode arrester Ordering code: (top right header bar) B88069X5080**** Series/Type: (top right header bar) EF470X Preliminary data (optional): EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information (if necessary) contained therein without EPCOS' prior express consent is prohibited. Department: PPD AB PD / PPD AB PM EPCOS AG is a TDK Group Company. Date: Issue 06 / 2013-09-16 Surge arrester 2-electrode arrester B88069X5080**** EF470X Features Standard size High follow current capability Very fast response time Stable performance over life Very low capacitance High insulation resistance RoHS-compatible Applications Application with high follow current Power supply Cable TV Electrical specifications DC spark-over voltage 1) 2) 400 ... 588 V Impulse spark-over voltage at 100 V/µs - for 99 % of measured values - typical values of distribution < 700 < 600 V V < 800 < 700 V V 5 65 5 10 1 A A kA kA kA Max. follow current during one voltage half cycle at 50 Hz 3) 200 A Insulation resistance at 100 VDC > 10 G Capacitance at 1 MHz < 1.5 pF Arc voltage at 1 A Glow to arc transition current Glow voltage ~ 22 < 0.5 ~ 140 V A V Weight ~ 1.5 g Operation and storage temperature -40 ... +125 °C Climatic category (IEC 60068-1) 40/ 125 / 21 at 1 kV/µs Service life 10 operations 1 operation 10 operations 1 operation 1 operation - for 99 % of measured values - typical values of distribution 50 Hz, 1 s 50 Hz, 0.18 s (9 cycles) 8/20 µs 8/20 µs 10/350 µs Marking, red positive EF 470 YY O EF 470 YY O - Series - Nominal voltage - Year of production - Non radioactive 1) At delivery AQL 0.65 level II, DIN ISO 2859 In ionized mode 3) Follow current has to be limited by an appropriate varistor in series. Terminology in accordance with ITU-T Rec. K.12; IEC 61663-2 and IEC 61643-311. 2) PPD AB PD / PPD AB PM Please read Cautions and warnings and Important notes at the end of this document. Issue 06 / 2013-09-16 Page 2 of 5 Surge arrester 2-electrode arrester B88069X5080**** EF470X Dimensional drawing in mm Ordering codes and packing advices B88069X5080S102 = 100 pcs. on 5 taped stripes B88069X5080T502 = 500 pcs. on tape and reel PPD AB PD / PPD AB PM Please read Cautions and warnings and Important notes at the end of this document. Issue 06 / 2013-09-16 Page 3 of 5 Surge arrester 2-electrode arrester B88069X5080**** EF470X Display of ordering codes for EPCOS products The ordering code for one and the same EPCOS product can be represented differently in data sheets, data books, other publications, on the EPCOS website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products. Detailed information can be found on the Internet under www.epcos.com/orderingcodes. Cautions and warnings Surge arresters must not be operated directly in power supply networks. The follow current must be limited so that the arrester can be properly extinguished when the surge has decayed. The arrester might otherwise heat up and ignite adjacent components. Surge arresters may become hot in case of longer periods of current stress (danger of burning). Surge arresters may be used only within their specified values. In case of overload, the lead contacts may fail or the component may be destroyed. Surge arresters must be handled with care and must not be dropped. Damaged surge arresters must not be re-used. PPD AB PD / PPD AB PM Please read Cautions and warnings and Important notes at the end of this document. Issue 06 / 2013-09-16 Page 4 of 5 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 5 of 5