SAW Components, B9909

SAW Components
SAW 2in1 filter
GSM 1800 / GSM 1900
Series/type:
Ordering code:
B9909
B39192B9909P810
Date:
Version:
October 22,2013
2.0
 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B9909
1842.5 / 1960.0 MHz
SAW 2in1 filter
Data sheet
Application
■ Low-loss RF filter for mobile telephone GSM 1800
and GSM 1900 systems, recieve path (Rx)
■ Usable passband:
GSM 1800: 75 MHz
GSM 1900: 60 MHz
■ Unbalanced to unbalanced operation for both filters
■ Impedance at input and output 50 Ω for both filters
■ Low amplitude ripple
Features
0.49
0.39
2
3
4
10
5
9
8
7
0.21
9
1.5
8
7
side view
6
6
5
2
bottom view
0.075
10
1
0.18
0.175
1
0.45 max.
0.18
3
1.1
Package size 1.5 x 1.1 mm2
Maximum package height 0.45 mm
RoHS compatible
Approx. weight 0.003g.
Package for Surface Mount Technology (SMT)
Ni, gold-plated terminals
Electrostatic Sensitive Device (ESD)
Moisture Sensitive Level 3
0.075
■
■
■
■
■
■
■
■
top view
4
Pin configuration
■ 6
■ 9
■ 1
■ 2, 3, 5, 10
■ 4, 7, 8
Input [GSM 1800]
Input [GSM 1900]
Output Diplex [GSM 1800 and
GSM 1900]
Case ground
To be grounded
9
1
8
7
6
4
2,3,5,10
Please read cautions and warnings and
important notes at the end of this document.
2
October 22,2013
SAW Components
B9909
1842.5 / 1960.0 MHz
SAW 2in1 filter
Data sheet
Characteristics of GSM 1800
T =
ZS =
ZL =
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
-20 ˚C to +85 ˚C
50 Ω
50 Ω || 3 nH
min.
typ.
@ 25 ˚C
max.
—
1842.5
—
MHz
—
2.3
3.5
dB
—
1.6
2.5
dB
1805.0 ... 1880.0MHz
—
1.9
2.2
1805.0 ... 1880.0MHz
—
1.8
2.2
33
33
23
9
23
22
24
26
23
25
25
27
28
32
25
38
37
28
15
26
29
30
33
28
35
30
33
36
44
45
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Center frequency
fC
Maximum insertion attenuation
1805.0 ... 1880.0MHz
αmax
Amplitude ripple (p-p)
1805.0 ... 1880.0MHz
∆α
Input VSWR
Output VSWR
α
Attenuation
10.0
902.0
940.0
1705.0
1920.0
1980.0
2030.0
2400.0
2500.0
2775.0
2880.0
3610.0
3760.0
5415.0
5640.0
...
...
...
...
...
...
...
...
...
...
...
...
...
...
...
902.0MHz
940.0MHz
1705.0MHz
1785.0MHz
1980.0MHz
2030.0MHz
2400.0MHz
2500.0MHz
2775.0MHz
2880.0MHz
3610.0MHz
3760.0MHz
5415.0MHz
5640.0MHz
6000.0MHz
Please read cautions and warnings and
important notes at the end of this document.
3
October 22,2013
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
SAW Components
B9909
1842.5 / 1960.0 MHz
SAW 2in1 filter
Data sheet
Maximum ratings of GSM 1800
Storage temperature range
DC voltage
ESD voltage
Input Power
1710.0 ... 1785.0
Tstg
VDC
VESD
VESD
VESD
MHz PIN
–40/85
5
501)
1502)
6003)
15
˚C
V
V
V
V
Machine Model
Human Body Model
Charged Device Model
dBm
duty cycle 4 : 8
1)
acc. to JESD22-A115B (MM - Machine Model), 10 negative & 10 positive pulses
2)
acc. to JESD22-A114F (HBM - Human Body Model), 1 negative & 1 positive pulse.
3)
acc. to JESD22-C101C (CDM - Charged Device Model), 3 negative & 3 positive pulses.
Please read cautions and warnings and
important notes at the end of this document.
4
October 22,2013
SAW Components
B9909
1842.5 / 1960.0 MHz
SAW 2in1 filter
Data sheet
Transfer function of GSM 1800
Transfer function (wideband) of GSM 1800
Please read cautions and warnings and
important notes at the end of this document.
5
October 22,2013
SAW Components
B9909
1842.5 / 1960.0 MHz
SAW 2in1 filter
Data sheet
Smith charts of GSM 1800
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
6
October 22,2013
SAW Components
B9909
1842.5 / 1960.0 MHz
SAW 2in1 filter
Data sheet
Characteristics of GSM 1900
T =
ZS =
ZL =
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
fC
Center frequency
-20 ˚C to +85 ˚C
50 Ω
50 Ω || 3 nH
min.
typ.
@ 25˚C
max.
—
1960.0
—
MHz
—
2.2
3.5
dB
dB
αmax
Maximum insertion attenuation
1930.0 ... 1990.0
MHz
Amplitude ripple (p-p)
1930.0 ... 1990.0
MHz
—
1.1
2.4
1930.0 ... 1990.0
MHz
—
1.7
2.1
1930.0 ... 1990.0
MHz
—
1.7
2.1
28
24
25
30
26
11
2
20
30
28
35
24
24
33
29
30
35
31
16
7
25
36
33
42
36
34
—
—
—
—
—
—
—
—
—
—
—
—
—
∆α
Input VSWR
Output VSWR
α
Attenuation
10.0
1200.0
1510.0
1830.0
1850.0
1890.0
2010.0
2070.0
2400.0
2500.0
3860.0
3980.0
5790.0
...
...
...
...
...
...
...
...
...
...
...
...
...
1200.0
1510.0
1830.0
1850.0
1890.0
1910.0
2070.0
2400.0
2500.0
3860.0
3980.0
5790.0
6000.0
Please read cautions and warnings and
important notes at the end of this document.
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
7
October 22,2013
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
SAW Components
B9909
1842.5 / 1960.0 MHz
SAW 2in1 filter
Data sheet
Maximum ratings of GSM 1900
Storage temperature range
DC voltage
ESD voltage
Input Power
1850.0 ... 1910.0
Tstg
VDC
VESD
VESD
VESD
MHz PIN
–40/85
5
501)
1502)
6003)
16
˚C
V
V
V
V
Machine Model
Human Body Model
Charged Device Model
dBm
duty cycle 4 : 8
1)
acc. to JESD22-A115B (MM - Machine Model), 10 negative & 10 positive pulses
2)
acc. to JESD22-A114F (HBM - Human Body Model), 1 negative & 1 positive pulse.
3)
acc. to JESD22-C101C (CDM - Charged Device Model), 3 negative & 3 positive pulses.
Please read cautions and warnings and
important notes at the end of this document.
8
October 22,2013
SAW Components
B9909
1842.5 / 1960.0 MHz
SAW 2in1 filter
Data sheet
Transfer function of GSM 1900
Transfer function (wideband) of GSM 1900
Please read cautions and warnings and
important notes at the end of this document.
9
October 22,2013
SAW Components
B9909
1842.5 / 1960.0 MHz
SAW 2in1 filter
Data sheet
Smith charts of GSM 1900
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
10
October 22,2013
SAW Components
B9909
1842.5 / 1960.0 MHz
SAW 2in1 filter
Data sheet
References
Type
B9909
Ordering code
B39192B9909P810
Marking and package
C61157-A8-A94
Packaging
F61074-V8227-Z000
Date codes
L_1126
B9909_LB_NB.s2p, B9909_LB_WB.s2p
S-parameters
B9909_UB_NB.s2p, B9909_UB_WB.s2p
see file header for port/pin assignment table
Soldering profile
S_6001
RoHS compatible
RoHS-compatible means that products are compatible with the
requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the
Council of June 8th, 2011, on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
(“Directive”) with due regard to the application of exemptions as
per Annex III of the Directive in certain cases.
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
for a large variety of matching coils
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2013. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
11
October 22,2013
SAW Components
B9909
1842.5 / 1960.0 MHz
SAW 2in1 filter
Data sheet
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information
will be found on the Internet at www.epcos.com/trademarks.
Please read cautions and warnings and
important notes at the end of this document.
12
October 22,2013