B39242B5133U410

SAW Components
SAW RF filter for base stations
TD-LTE, Band 40
Series/type:
Ordering code:
B5133
B39242B5133U410
Date:
Version:
July 22, 2013
2.6
 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
B5133
2350.0 MHz
SAW RF filter
Data sheet
Application
■ RF filter for TD-LTE BTS
■ Usable bandwidth 100 MHz
■ Unbalanced operation at 50 Ω
Features
■
■
■
■
■
■
■
■
■
Package size 3.0 x3.0 x 1.10 mm3
Package code DCC6C
RoHS compatible
Approximate weight 0.037 g
Ceramic package for Surface Mount Technology
(SMT)
Ni, gold-plated terminals
Electrostatic Sensitive Device (ESD)
Filter surface passivated
Moisture Sensitivity Level 1
Pin configuration
■ 2
Input
■ 5
Output
■ 1, 3, 4, 6 To be grounded
Please read cautions and warnings and
important notes at the end of this document.
2
July 22, 2013
SAW Components
B5133
2350.0 MHz
SAW RF filter
Data sheet
Characteristics
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T = –40 ˚C to +85 ˚C
ZS =
50 Ω and matching network #1
ZL =
50 Ω and matching network #1
min.
Nominal frequency
fN
—
typ.
@ 25 ˚C
2350
Minimum insertion attenuation
αmin
—
1.5
2.0
dB
Maximum insertion attenuation
2300. .... 2400 MHz
αmax
—
2.0
3.0
dB
Amplitude ripple (p-p)
2300 .... 2400 MHz
∆α
—
0.5
1.3
dB
—
1.6:1
2.0:1
30
30
15
15
25
15
40
35
22
25
28
20
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
30
21
24
35
23
26
—
—
—
dB
dB
dB
V.S.W.R. (input / output)
2300 .... 2400 MHz
Absolute attenuation
1.00
2050.00
2170.00
2450.00
2550.00
5000.00
max.
—
MHz
α
...
...
...
...
...
...
2050.00
2170.00
2250.00
2550.00
4000.00
6000.00
MHz
MHz
MHz
MHz
MHz
MHz
Relative attenuation (relative to αmin)
0.30 ... 2170.00 MHz
2470.00 ... 2564.32 MHz
2564.32 ... 3000.00 MHz
αrel
Matching network #1 to 50 Ω
Cs2
Lp1 = 1.8 nH
Ls3
Cs2 = 1.8 pF
Lp1
Cp4
(Element values depend upon board layout and properties)
Please read cautions and warnings and
important notes at the end of this document.
3
July 22, 2013
Ls3 = 1.8 nH
Cp4 = 0.5 pF
SAW Components
B5133
2350.0 MHz
SAW RF filter
Data sheet
Characteristics
Temperature range for specification:
Terminating source impedance:
Terminating load impedance:
T = –40 ˚C to +85 ˚C
ZS =
50 Ω and matching network #2
ZL =
50 Ω and matching network #2
min.
Nominal frequency
fN
—
typ.
@ 25 ˚C
2350
Minimum insertion attenuation
αmin
—
1.5
2.0
dB
Maximum insertion attenuation
2300. .... 2400 MHz
αmax
—
2.0
3.0
dB
Amplitude ripple (p-p)
2300 .... 2400 MHz
∆α
—
0.5
1.3
dB
—
1.8:1
2.2:1
30
30
15
15
24
25
40
35
22
25
27
35
—
—
—
—
—
—
dB
dB
dB
dB
dB
dB
30
21
24
35
23
26
—
—
—
dB
dB
dB
V.S.W.R. (input / output)
2300 .... 2400 MHz
Absolute attenuation
1.00
2050.00
2170.00
2450.00
2550.00
5100.00
max.
—
MHz
α
...
...
...
...
...
...
2050.00
2170.00
2250.00
2550.00
4000.00
5900.00
MHz
MHz
MHz
MHz
MHz
MHz
Relative attenuation (relative to αmin)
0.30 ... 2170.00 MHz
2470.00 ... 2564.32 MHz
2564.32 ... 3000.00 MHz
αrel
Matching network #2 to 50 Ω
Ls2
Cp1 = 1.2 pF
Ls3
Ls2 = 1.2 nH
Cp1
Cp4
(Element values depend upon board layout and properties)
Please read cautions and warnings and
important notes at the end of this document.
4
July 22, 2013
Ls3 = 1.8 nH
Cp4 = 0.5 pF
SAW Components
B5133
2350.0 MHz
SAW RF filter
Data sheet
Maximum ratings
Operable temperature range T
Storage temperature range Tstg
DC voltage
ESD voltage
ESD voltage
Input power at
VDC
VESD
VESD
–40/+85
–40/+85
˚C
˚C
0
501)
2002)
V
V
V
machine model, 1 pulse
human body model, 1 pulse
2300.0... 2400.0 MHz
PIN
17
dBm
cw,
2 h lifetime, at 85 ˚C
2300.0... 2400.0 MHz
2300.0... 2400.0 MHz
PIN
PIN
12
7
dBm
dBm
cw,
100 h lifetime, at 85 ˚C
2300.0... 2400.0 MHz
PIN
5
dBm
cw, 100000 h lifetime, at 85 ˚C
duty cycle 7:10,
100000 h lifetime, at 85 ˚C
1)
acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulses.
2)
acc. to JESD22-A114F (human body model), 1 negative & 1 positive pulses.
Please read cautions and warnings and
important notes at the end of this document.
5
July 22, 2013
SAW Components
B5133
2350.0 MHz
SAW RF filter
Data sheet
Transfer function (normalized)
Transfer function (stop band, matching network #1)
Please read cautions and warnings and
important notes at the end of this document.
6
July 22, 2013
SAW Components
B5133
2350.0 MHz
SAW RF filter
Data sheet
References
Type
B5133
Ordering code
B39242B5133U410
Marking and package
C61157-A7-A67
Packaging
F61074-V8168-Z000
Date codes
L_1126
S-parameters
B5133_NB.s2p, B5133_WB.s2p, B5133_NB_UN.s2p,
B5133_WB_UN.s2p
See file header for port/pin assignment table
Soldering profile
S_6001
RoHS compatible
RoHS-compatible means that products are compatible with the
requirements according to Art. 4 (substance restrictions) of Directive 2011/65/EU of the European Parliament and of the
Council of June 8th, 2011, on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
("Directive") with due regard to the application of exemptions as
per Annex III of the Directive in certain cases.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
for a large variety of matching coils.
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2013. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
7
July 22, 2013
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information
will be found on the Internet at www.epcos.com/trademarks.
8
July 22, 2013