FILTER TERMINAL Dimensions in inches (mm) Capacitance Tolerance Coded Dash Numbers How to order code -01 -02 560 - 8265 - XX - XX - 00 ±10% ±20% K M To Order Standard Capacitance Tolerance Basic Part No. Capacitance Code Material Code Table Component Mounting Stud Terminal Dielectric Insulation Lock washer Mounting Hex Nut Basic Part No. 560-8265 Material Brass Brass Ceramic Epoxy Phosphor Bronze Brass Finish 0.5µM over 1.25µM nickel plate 0.5µM over 1.25µM nickel plate 0.5µM over 7.5µM nickel plate 0.5µM over 7.5µM nickel plate Capacitance (pF) Test Frequency (KHz) -27 150.00 1.00 -31 330.00 1.00 -33 470.00 1.00 -35 680.00 1.00 -37 1000.00 1.00 -39 1500.00 1.00 -41 2200.00 1.00 Dielectric Strength: A potential of 250% of rated voltage may be applied for 5 seconds at 25˚C Terminal strength: a force of 20 lbs. (9.1Kg) exerted in the direction of terminal exceeds the requirements of MIL-C-11015C Insulation Resistance: >1GΩ @500V DC measured at 25˚C Working Voltage: 500V DC Supplied with lock washer and hex nut unassembled Suggested Mounting Torque: 4inch/lbs. (0.448Nm) Devices are RoHS compliant Temperature Coefficient: Maximum capacitance change from 25ºC. Value over the temperature range: -40ºC to +85ºC is +22% -56% Call our dedicated order line on +44 (0) 1433 621555 or visit www.cambion.com 87