74AHC1G09 - Diodes Incorporated

74AHC1G09
SINGLE 2 INPUT POSITIVE AND GATE WITH OPEN DRAIN OUTPUT
Description
Pin Assignments
The 74AHC1G09 is a single 2-input positive AND gate with an open
(Top View)
drain output. The device is designed for operation with a power
supply range of 2.0V to 5.5V. The open-drain output can be
connected to other open drain outputs to implement active-low wiredOR or active-high wired-AND functions.
A
The gate performs the
NEW PRODUCT
positive Boolean function:
Y  A B
or
5 Vcc
1
B 2
Y  AB
4 Y
GND 3
A pull-up resistor is required to achieve a high output state.
SOT25 / SOT353
Features

Supply Voltage Range from 2.0V to 5.5V

8mA sink current at 5.0 V

CMOS low power consumption

Schmitt Trigger Action at All Inputs Make the Circuit Tolerant for
Slower Input Rise and Fall Time.


ESD Protection per JESD 22


Exceeds 200-V Machine Model (A115-A)

Exceeds 2000-V Human Body Model (A114-A)

Exceeds 1000-V Charged Device Model (C101C)

Latch-Up Exceeds 100mA per JESD 78, Class II

SOT25 and SOT353: Assembled with “Green” Molding
Compound (no Br, Sb)

Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
Applications
General Purpose Logic
Wide array of products such as:

PCs, networking, notebooks, netbooks, PDAs

Computer peripherals, hard drives, CD/DVD ROM

TV, DVD, DVR, set top box

Personal Navigation / GPS

MP3 players ,Cameras, Video Recorders
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Pin Descriptions
Pin Name
A
B
GND
Y
VCC
Pin NO.
1
2
3
4
5
74AHC1G09
Document number: DS35735 Rev. 2 - 2
Function
Data Input
Data Input
Ground
Data Output
Supply Voltage
1 of 9
www.diodes.com
March 2013
© Diodes Incorporated
74AHC1G09
Logic Diagram
A
NEW PRODUCT
B
1
4
2
Y
Functional Table
Inputs
A
H
L
X
B
H
X
L
Output
Y
Z
L
L
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD CDM
ESD MM
Rating
2
1
200
Unit
KV
KV
V
V
Supply Voltage Range
-0.5 to 6.5
VI
Input Voltage Range
-0.5 to 6.5
V
VO
Voltage applied to output in high or low state
-0.5 to VCC +0.5
V
IIK
Input Clamp Current VI < 0
-20
mA
IOK
Output Clamp Current (VO < 0 or VO > VCC)
±20
mA
IO
Continuous output current (VO = 0 to VCC)
±25
mA
VCC
ICC
Continuous current through VCC
50
mA
IGND
Continuous current through GND
-50
mA
TJ
Operating Junction Temperature
-40 to +150
°C
Storage Temperature
-65 to +150
°C
TSTG
Note:
Parameter
Human Body Model ESD Protection
Charged Device Model ESD Protection
Machine Model ESD Protection
4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be
within recommend values.
74AHC1G09
Document number: DS35735 Rev. 2 - 2
2 of 9
www.diodes.com
March 2013
© Diodes Incorporated
74AHC1G09
Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
Parameter
Operating Voltage
NEW PRODUCT
High-Level Input Voltage
Max
Unit
2.0
5.5
V
1.5
VCC = 2V
VIH
Min
VCC = 3V
2.1
VCC = 5.5V
3.85
V
VCC = 2V
0.5
VCC = 3V
0.9
V
VIL
Low-Level input Voltage
VI
Input Voltage
0
5.5
V
VO
Output Voltage
0
5.5
V
uA
IOL
Low-Level Output Current
1.65
VCC = 5.5V
Δt/ΔV
Input transition rise or fall rate
TA
Operating free-air temperature
Note:
VCC = 2V
50
VCC = 5V ± 0.5V
4
VCC = 3V
8
VCC = 3.3V ± 0.3V
100
VCC = 5V ± 0.5V
20
-40
mA
ns/V
+125
°C
5. Unused inputs should be held at VCC or Ground.
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Symbol
VOL
Parameter
High-level Input
Voltage
Test Conditions
IOL = 50μA
IOL = 4mA
VCC
Min
+25°C
Typ
2V
3V
Max
0.1
0.1
-40°C to +85°C
Min
Max
0.1
0.1
-40°C to +125°C
Min
Max
0.1
0.1
4.5V
0.1
0.1
0.1
3V
0.36
0.44
0.55
Unit
V
4.5V
0.36
0.44
0.55
II
Input Current
VI = 5.5V or GND
0 to 5.5V
±0.1
±1
±2
μA
Ioz
Z-state Output
Current
VI = 5.5V or GND
0 to 5.5V
±0.25
±2.5
±10
μA
ICC
Supply Current
VI = 5.5V or GND
IO=0
5.5V
1
10
40
μA
10
10
10
pF
IOL = 8mA
Ci
θJA
θJC
Note:
Input Capacitance
Thermal
Resistance
Junction-toAmbient
Thermal
Resistance
Junction-to-Case
Vi = VCC – or GND
5.5V
2.0
SOT25
SOT353
204
(Note 6)
SOT25
SOT353
°C/W
371
52
(Note 6)
°C/W
143
6. Test conditions for SOT25, and SOT353: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
74AHC1G09
Document number: DS35735 Rev. 2 - 2
3 of 9
www.diodes.com
March 2013
© Diodes Incorporated
74AHC1G09
Switching Characteristics
NEW PRODUCT
VCC = 3.3V ±0.3 (see Figure 1)
Parameter
From
(Input)
TO
(OUTPUT)
tpd
A or B
Y
CL = 15pF
Min
0.6
+25°C
Typ
4.6
Max
7.5
CL = 50pF
0.6
6.5
Min
CL = 15pF
CL = 50pF
-40°C to +85°C
Min
Max
0.6
8.5
-40°C to +125°C
Min
Max
0.6
9.0
11.0
0.6
12.0
0.6
+25°C
Typ
Max
-40°C to +85°C
Min
Max
-40°C to +125°C
Min
Max
0.6
3.2
5.5
0.6
6.5
0.6
7.0
ns
0.6
4.6
7.5
0.6
8.0
0.6
8.5
ns
Unit
ns
12.5
ns
VCC = 5V ±0.5V (see Figure 1)
Parameter
From
(Input)
TO
(OUTPUT)
tpd
A or B
Y
Unit
Operating Characteristics
TA = +25°C
Unit
Typ
f = 1 MHz
No Load
Power dissipation capacitance
Cpd
VCC = 5V
Test
Conditions
Parameter
5
pF
Parameter Measurement Information
RL
From Output
Under Test
VLOAD
C
L
(see Note A)
VCC
Inputs
Condition
VLOAD
VLOAD
V∆
VM
VLOAD
CL
RL
≤3ns
VCC/2
VCC
15pF
1KΩ
0.3V
≤3ns
VCC/2
VCC
50pF
1KΩ
0.3V
VCC
≤3ns
VCC/2
VCC
15pF
1KΩ
0.3V
VCC
≤3ns
VCC
50pF
1KΩ
0.3V
VI
tr/tf
3.3V ±0.3V
VCC
3.3V ±0.3V
VCC
5V ±0.5V
5V ±0.5V
TEST
tPLZ (see Notes D and E)
tPZL (see Notes D and F)
74AHC1G09
Document number: DS35735 Rev. 2 - 2
VCC/2
4 of 9
www.diodes.com
March 2013
© Diodes Incorporated
74AHC1G09
NEW PRODUCT
Parameter Measurement Information (cont.)
Voltage Waveform Pulse Duration
Voltage Waveform
Propagation Delay Times
Figure 1 Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 1 MHz.
C. The inputs are measured one at a time with one transition per measurement.
D. For the open drain device tPLZ and tPZL are the same as tPD.
E. tPZL is measured at VM.
F. tPLZ is measured at VOL +V∆
74AHC1G09
Document number: DS35735 Rev. 2 - 2
5 of 9
www.diodes.com
March 2013
© Diodes Incorporated
74AHC1G09
Part Number
Package Code
Packaging
74AHC1G09W5-7
74AHC1G09SE-7
W5
SE
SOT25
SOT353
7” Tape and Reel
Quantity
3000/Tape & Reel
3000/Tape & Reel
Part Number Suffix
-7
-7
Marking Information
(Top View)
5
4
7
NEW PRODUCT
Ordering Information
XX Y W X
1
Part Number
74AHC1G09W5
74AHC1G09SE
74AHC1G09
Document number: DS35735 Rev. 2 - 2
2
3
XX : Identification code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal code
Package
SOT25
SOT353
6 of 9
www.diodes.com
Identification Code
YN
YN
March 2013
© Diodes Incorporated
74AHC1G09
Package Outline Dimensions (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
(1)
Package Type: SOT25
NEW PRODUCT
A
B C
H
K
J
(2)
M
N
SOT25
Dim Min Max Typ
A
0.35 0.50 0.38
B
1.50 1.70 1.60
C
2.70 3.00 2.80
D

 0.95
H
2.90 3.10 3.00
J
0.013 0.10 0.05
K
1.00 1.30 1.10
L
0.35 0.55 0.40
M
0.10 0.20 0.15
N
0.70 0.80 0.75
0°
8°


All Dimensions in mm
L
D
Package Type: SOT353
A
B C
H
K
J
M
D
F
74AHC1G09
Document number: DS35735 Rev. 2 - 2
SOT353
Dim
Min
Max
A
0.10
0.30
B
1.15
1.35
C
2.00
2.20
D
0.65 Typ
F
0.40
0.45
H
1.80
2.20
J
0
0.10
K
0.90
1.00
L
0.25
0.40
M
0.10
0.22
0°
8°

All Dimensions in mm
L
7 of 9
www.diodes.com
March 2013
© Diodes Incorporated
74AHC1G09
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
(1) Package Type: SOT25
NEW PRODUCT
C2
Z
C2
C1
G
Y
Dimensions Value (in mm)
Z
3.20
G
1.60
X
0.55
Y
0.80
C1
X
C2
2.40
0.95
(2) Package Type: SOT353
C2
Z
C2
Dimensions Value (in mm)
Z
2.5
G
1.3
X
0.42
Y
0.6
C1
1.9
C2
0.65
C1
G
Y
X
74AHC1G09
Document number: DS35735 Rev. 2 - 2
8 of 9
www.diodes.com
March 2013
© Diodes Incorporated
74AHC1G09
IMPORTANT NOTICE
NEW PRODUCT
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2013, Diodes Incorporated
www.diodes.com
74AHC1G09
Document number: DS35735 Rev. 2 - 2
9 of 9
www.diodes.com
March 2013
© Diodes Incorporated