D24V0L1B2LPSQ 24V BIDIRECTIONAL TVS DIODE ADVANCE INFORMATION NEW PRODUCT Product Summary VBR (min) 26V Features and Benefits IPP (max) 2A • • • • CT (typ) 6pF • • • • • One Channel of ESD Protection Sidewall Plating for Easy Optical Inspection Low Profile and Ultra-small Form Factor Minimizes PCB Footprint Provides ESD Protection per IEC 61000-4-2 Standard: Air ±20kV, Contact ±20kV Low Channel Input Capacitance to Prevent Data Degradation Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability PPAP Capable (Note 4) Description and Applications Mechanical Data The D24V0L1B2LPSQ is a next generation ESD and surge protection device packaged in a low profile, small form factor package that features side wall plating for easy optical inspection. It is qualified to AECQ101, supported by a PPAP and is ideal for protecting one data line in: • • • • • • • • Controller Area Networks (CAN) Local Interconnect Networks (LIN) Flexray Automotive Networks Case: U-DFN1006-2/SWP with Sidewall Plating Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: NiPdAu over Copper Leadframe. Solderable per MIL-STD-202, Method 208 e4 Weight: 0.001 grams (Approximate) . Top View Bottom View Device Schematic Ordering Information (Note 4) Product D24V0L1B2LPSQ-7B Notes: Compliance Automotive Marking SG Reel Size (inches) 7 Tape Width (mm) 8 Quantity per Reel 10,000/Tape & Reel 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q10x qualified and are PPAP capable. Automotive, AEC-Q10x and standard products are electrically and thermally the same, except where specified. For more information, please refer to http://www.diodes.com/quality/product_compliance_definitions/. 5. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information SG D24V0L1B2LPSQ Document number: DS37495 Rev. 1 - 0 SG = Product Type Marking Code 1 of 4 www.diodes.com September 2014 © Diodes Incorporated D24V0L1B2LPSQ Maximum Ratings (@TA = +25°C, unless otherwise specified.) Characteristic Value Unit PPP 90 W 8/20µs, Per Figure 3 Peak Pulse Current IPP 2 A 8/20µs, Per Figure 3 VESD_Contact ±20 kV IEC 61000-4-2 Standard VESD_Air ±20 kV IEC 61000-4-2 Standard ESD Protection – Contact Discharge ESD Protection – Air Discharge Conditions Thermal Characteristics Characteristic Package Power Dissipation (Note 6) Thermal Resistance, Junction to Ambient (Note 6) Operating and Storage Temperature Range Symbol Value PD 250 Unit mW RθJA 500 °C/W TJ, TSTG -65 to +150 °C Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Min — Typ Max Unit VRWM — 24 V Channel Leakage Current (Note 7) IRM — — 100 nA VRWM = 24V Clamping Voltage, Positive Transients — — VCL 42 V IPP = 1A, tp = 8/20μS — — 46 V IPP = 2A, tp = 8/20μS Breakdown Voltage VBR 26 — 32 V IR = 1mA Channel Input Capacitance CT — 6 10 pF VR = 0V, f = 1MHz Reverse Standoff Voltage Notes: Symbol Test Conditions — 6. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at http://www.diodes.com. 7. Short duration pulse test used to minimize self-heating effect. 100 250 225 PEAK PULSE DERATING % OF PEAK POWER OR CURRENT Note 5 PD, POWER DISSIPATION (mW) ADVANCE INFORMATION NEW PRODUCT Symbol Peak Pulse Power Dissipation 200 175 150 125 100 75 50 75 50 25 25 0 0 25 50 150 75 100 125 TA, AMBIENT TEMPERATURE (°C) Figure 1 Power Derating Curve D24V0L1B2LPSQ Document number: DS37495 Rev. 1 - 0 175 2 of 4 www.diodes.com 0 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Figure 2 Pulse Derating Curve 200 September 2014 © Diodes Incorporated D24V0L1B2LPSQ IR, INSTANTANEOUS REVERSE CURRENT (nA) 10 IPP, PEAK PULSE CURRENT (%IPP) 100 Peak Value IPP Half Value IPP/2 50 8x20 Waveform as defined by R.E.A. tp 0 0 20 40 t, TIME (µs) Figure 3 Pulse Waveform 80 TA = 150°C TA = 85°C TA = 125°C TA = 25°C TA = -55°C 1 0 10 15 5 20 25 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 4 Typical Reverse Characteristics 10 9 f = 1MHz CT, TOTAL CAPACITANCE (pF) ADVANCE INFORMATION NEW PRODUCT tr = 8µs 8 7 6 5 4 3 2 1 0 0 5 10 15 20 VR, REVERSE VOLTAGE (V) Figure 5 Typical Capacitance 25 Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A A1 Seating Plane c h D Pin #1 ID E b( 2x) k D24V0L1B2LPSQ Document number: DS37495 Rev. 1 - 0 U-DFN1006-2/SWP Dim Min Max Typ A 0.47 0.53 0.50 A1 0.0 0.05 0.03 b 0.45 0.55 0.50 c 0.55 REF D 0.95 1.05 1.00 E 0.55 0.65 0.60 h 0.17 REF k 0.37 REF L 0.25 0.35 0.30 All Dimensions in mm L( 2x) 3 of 4 www.diodes.com September 2014 © Diodes Incorporated D24V0L1B2LPSQ Suggested Pad Layout ADVANCE INFORMATION NEW PRODUCT Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X1 X ( 2x) Dimensions X X1 Y Y Value (in mm) 0.45 1.20 0.60 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2014, Diodes Incorporated www.diodes.com D24V0L1B2LPSQ Document number: DS37495 Rev. 1 - 0 4 of 4 www.diodes.com September 2014 © Diodes Incorporated