SBR10U45SP5Q 10A SBR® SUPER BARRIER RECTIFIER POWERDI®5 Product Summary VRRM (V) 45 IO (A) 10 Features and Benefits VF MAX (V) @+25°C 0.47 IR MAX (mA) @+25°C 0.3 capability than schottky diodes ensuring more rugged and Description and Applications the stringent requirements of Automotive Applications. It is ideally suited to use as : Polarity Protection Diode Re-circulating Diode Switching Diode reliable end applications. Reduced ultra-low forward voltage drop (VF); better efficiency and cooler operation. This Super Barrier Rectifier (SBR) diode has been designed to meet 100% Avalanche Tested. Patented SBR technology provides a superior avalanche Reduced high temperature reverse leakage; increased reliability against thermal runaway failure at high temperature Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability Mechanical Data Case: POWERDI5 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Weight: 0.093 grams (approximate) ® POWERDI 5 LEFT PIN RIGHT PIN Top View Bottom View BOTTOMSIDE HEAT SINK Note: Pins Left & Right must be electrically connected at the printed circuit board. Ordering Information (Note 4) Part Number SBR10U45SP5Q-13 Notes: Compliance Automotive Case POWERDI5 Packaging 5000/Tape & Reel 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information S10U45S YYWWK S10U45S = Product Type Marking Code = Manufacturers’ Code Marking K = Factory Designator YYWW = Date Code Marking YY = Last Two Digits of Year (ex: 13 for 2013) WW = Week code (01 - 53) SBR and POWERDI are registered trademarks of Diodes Incorporated. SBR10U45SP5Q Document number: DS36358 Rev. 1 - 2 1 of 6 www.diodes.com June 2013 © Diodes Incorporated SBR10U45SP5Q Maximum Ratings (@TA = +25°C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Repetitive Peak Avalanche Power (1µs, +25°C) Non-Repetitive Avalanche Energy (TJ = +25°C, IAS = 12A, L = 10mH) Symbol Value Unit VRRM VRWM VRM 45 V VR(RMS) 32 V IO 10 A IFSM 275 A PARM 5630 W EAS 530 mJ Symbol Value Unit Thermal Characteristics Characteristic Maximum Thermal Resistance Thermal Resistance Junction to Ambient (Note 5) Thermal Resistance Junction to Ambient (Note 6) RθJA RθJA 73 31 °C/W Storage Temperature Range TSTG -55 to +150 °C Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Characteristic Reverse Breakdown Voltage (Note 7) Symbol V(BR)R Min 45 Typ — Max — Unit V Test Condition IR = 0.3mA Forward Voltage Drop VF — — — 0.41 0.44 0.38 — 0.47 — V IF = 8A, TJ = +25°C IF = 10A, TJ = +25°C IF = 10A, TJ = +125°C Leakage Current (Note 7) IR — — 0.09 30 0.3 — mA VR = 45V, TJ = +25°C VR = 45V, TJ = +125°C Notes: 5. FR-4 PCB, 2oz. Copper. Minimum recommended pad layout per http://www.diodes.com. 6. Polymide PCB, 2oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 14.4mm 7. Short duration pulse test used to minimize self-heating effect. SBR and POWERDI are registered trademarks of Diodes Incorporated. SBR10U45SP5Q Document number: DS36358 Rev. 1 - 2 2 of 6 www.diodes.com June 2013 © Diodes Incorporated SBR10U45SP5Q IF, INSTANTANEOUS FORWARD CURRENT (A) 5 4.5 PD, POWER DISSIPATION (W) 4 3.5 3 2.5 2 1.5 1 0.5 0 0 5 10 15 IF(AV), AVERAGE FORWARD CURRENT (A) Figure 1 Forward Power Dissipation T A = 125°C 1,000 0.1 T A = 25°C 0.01 TA = -55°C 0.001 0.0001 0 0.15 0.3 0.45 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Figure 2 Typical Forward Characteristics 10,000 T A = 85°C 100 TA = 25°C 10 1 0.1 T A = -55°C f = 1MHz 1,000 100 10 1 0.1 0 5 10 15 20 25 30 35 40 45 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Figure 3 Typical Reverse Characteristics 1 10 100 VR, DC REVERSE VOLTAGE (V) Figure 4 Total Capacitance vs. Reverse Voltage 150 TA, DERATED AMBIENT TEMPERATURE (°C) 12 IF, AVERAGE FORWARD CURRENT (A) TA = 85°C 1 TA = 150°C 10,000 Based on Lead Temp (T L) 10 8 Note 9 6 4 Note 8 2 0 TA = 150°C T A = 125°C CT, TOTAL CAPACITANCE (pF) IR, INSTANTANEOUS REVERSE CURRENT (µA) 10 100,000 100,000 0.01 100 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Figure 5 Forward Current Derating Curve Note 8 125 100 75 50 25 0 0 4.5 9 13.5 18 22.5 27 31.5 36 40.5 45 VR, DC REVERSE VOLTAGE (V) Figure 6 Operating Temperature Derating SBR and POWERDI are registered trademarks of Diodes Incorporated. SBR10U45SP5Q Document number: DS36358 Rev. 1 - 2 3 of 6 www.diodes.com June 2013 © Diodes Incorporated SBR10U45SP5Q 100000 PARM, MAXIMUM AVALANCHE POWER (W) PARM, AVALANCHE PEAK PULSE POWER DERATING PERCENTAGE (%) 120 100 80 10000 60 40 20 0 0 25 50 75 100 125 TJ, JUNCTION TEMPERATURE (°C) Figure 7 Pulse Derating Curve 1000 100 10.0 150 100.0 1000.0 10000.0 TP, PULSE DURATION (µS) Figure 8 Maximum Avalanche Power P(PK), PEAK TRANSIENT POIWER (W) 800 Single Pulse RJA = 78C/W RJA(t) = r(t) * RJA T J - TA = P * R JA(t) 700 600 500 400 300 200 100 0 0.00001 0.0001 0.001 0.01 0.1 1 t1, PULSE DURATION TIME (sec) Figure 9 Single Pulse Maximum Power Dissipation r(t), TRANSIENT THERMAL RESISTANCE 1 D = 0.7 D = 0.5 D = 0.3 0.1 D = 0.1 D = 0.05 D = 0.02 0.01 D = 0.01 RJA(t) = r(t) * RJA RJA = 78°C/W Duty Cycle, D = t1/ t2 D = 0.005 Single Pulse 0.001 0.01 Notes: D = 0.9 0.1 1 10 100 t1, PULSE DURATION TIMES (sec) Figure 10 Transient Thermal Resistance 1,000 10,000 8. Device mounted on FR-4 substate, 2oz copper, with minimum recommended pad layout. 9. Device mounted on FR-4 substate, 2oz copper, with 10cm x 10cm pad layout. SBR and POWERDI are registered trademarks of Diodes Incorporated. SBR10U45SP5Q Document number: DS36358 Rev. 1 - 2 4 of 6 www.diodes.com June 2013 © Diodes Incorporated SBR10U45SP5Q Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A D b2 POWERDI5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.054 Typ E 6.40 6.60 e 1.84 Typ E1 5.30 5.45 E2 3.549 Typ L 0.75 0.95 L1 0.50 0.65 W 1.10 1.41 All Dimensions in mm D2 A2 L E E2 E1 W L1 e b1 b1 A2 Suggested Pad Layout Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. X Dimensions C G X X1 Y Y1 Y X1 (2x) Value (in mm) 1.840 0.852 3.360 1.390 4.860 1.400 G Y1 (2x) C SBR and POWERDI are registered trademarks of Diodes Incorporated. SBR10U45SP5Q Document number: DS36358 Rev. 1 - 2 5 of 6 www.diodes.com June 2013 © Diodes Incorporated SBR10U45SP5Q IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2013, Diodes Incorporated www.diodes.com SBR and POWERDI are registered trademarks of Diodes Incorporated. SBR10U45SP5Q Document number: DS36358 Rev. 1 - 2 6 of 6 www.diodes.com June 2013 © Diodes Incorporated